0510 Prevention of retention in the eccentric hopper

Compliance with the Food Sanitation Act! Here is an introduction to cases where Brody disks and controllers have been used.

last updated Oct 04, 2024

Installed on the hopper with internal fluororesin coating.

Measures against rat holes! Introducing a case of fluororesin coating and the installation of a brodie disk.

last updated Oct 04, 2024

Installed in a tank of calcium carbonate-based materials.

A total of 6 standard Brodisk units will be installed! We will provide a rational selection and layout plan for the models.

last updated Oct 04, 2024

0513 Cornstarch - Starch Bridge Prevention

Using a Brodisk for bridge measures! Positive results and a case where it was purchased including the controller.

last updated Oct 07, 2024

0514 Measures to prevent clogging of titanium dioxide

Easily solved with Brodisk! We will provide guidance on selecting models and arrangements that meet the user's requirements.

last updated Oct 07, 2024

0515 Resolve the blockage in the transport piping.

Powder blockage in transport piping! Introducing a case study where the Brody Disk Mini was adopted.

last updated Oct 07, 2024

0516 At the recycling toner factory

Introducing a case study of a factory that is recycling toner cartridges for laser printers.

last updated Oct 07, 2024

0517 φ600 (discharge section φ50) for air transport hopper

Installed two standard Brodisks and two Brodisk Minis! A case where the clogging was resolved.

last updated Oct 07, 2024

0518 Repurposing the talc hopper, bridge countermeasures

Especially, no welding is required, and it can be easily installed! Examples of using the Brody disk.

last updated Oct 07, 2024

0519 Installation on the hopper for crushed PTFE sheet.

A case where the introduction was made after actually using it and confirming its effectiveness.

last updated Oct 07, 2024

0520 Resolution of rat holes in aluminum hydroxide

We would like to introduce a case that has been consulted by users who are already using our Brodisk!

last updated Oct 07, 2024

0521 Bridge measures for feather powder (high moisture content)

Here is an example of a case where a blow disk was adopted in part of the drying equipment!

last updated Oct 07, 2024

The silicone disc boasts excellent durability.

Preparation of sample pieces is also possible! Here are examples of cases where the Brody disk and controller have been adopted.

last updated Oct 07, 2024

0523 Attached to a small hopper for quicklime.

Easy and economical installation! Introducing cases where troubles were resolved by the Brody Disk.

last updated Oct 07, 2024

0524 At the recycling plant

Install a total of 12 standard Brodisk units with varying heights, and sequentially turn on the air with a time delay for every two units!

last updated Oct 07, 2024

Measures against the adhesion growth of resin micropowder

A case where it was judged to be good due to the absence of attachment growth, and multiple Brody disks were introduced.

last updated Oct 07, 2024

0526 Bridge measures for Sic fine powder

An example of lending out the actual Brody Disk Mini and Brody Disk first at the customer's request.

last updated Oct 07, 2024

0527 Rat hole measures in the upper hopper of the quantitative supply device.

The subject is a very poorly flowing fine powder! This is an example of a substance with properties similar to titanium dioxide.

last updated Oct 07, 2024

0528 Solving the discharge issues of magnesium oxide-based powder.

Three standard Brodisk (BD-15 type) units were installed in the hopper and testing was conducted.

last updated Oct 07, 2024

0529 Improvement of poor outflow of sludge incineration ash

Resolved issues where insufficient remaining contents in the silo caused discharge failures, preventing truck loading!

last updated Oct 07, 2024

0530 Delivery to the manufacturer of quasi-drugs: Brody Disk Mini

Special Brody Disk Mini! Various documents requested by the customer will also be submitted in accordance with the delivery.

last updated Oct 07, 2024

0531 Prevention of adhesion of urethane pellets

To prevent adhesion, it is effective to spray air at high pressure! Here are examples of the installation of blow discs.

last updated Oct 07, 2024

0532 Aeration of alkaline agents and hydrated lime silo

Manufactured with thoroughly selected materials and processes! Introducing case studies of Brody disks.

last updated Oct 07, 2024

0533 Large silo for coal ash (fly ash)

Install our Brodisk! We have received high trust regarding its effectiveness and durability.

last updated Oct 07, 2024

0534 Preventing bridging of particles approximately a few mm in size [rectangular prism]

Bridge measures at the hopper discharge section! Introducing a case study of the delivery of a blow disc.

last updated Oct 07, 2024

0535 E-PVC bridge measures

The results of the usage are excellent, and we will implement it immediately! Taking into account the various conditions of our customers, we will guide you on the arrangement of the equipment and the control methods.

last updated Oct 07, 2024

0536 Advice on residual measures for eccentric hopper.

You tried setting the air pressure to 0.3 MPa or higher and the air ON time to about 5 seconds!

last updated Oct 07, 2024

0537 Residual measures for the dust collector hopper section

Since configurations are important, we kindly ask customers who are interested to please consult with us, even if it may be a bit of a hassle!

last updated Oct 07, 2024

0538 Bridge measures for PTFE flakes

Testing operation with 4 Brodisk Mini units! The results were good, and we will proceed with the introduction.

last updated Oct 07, 2024

0539 Used in air transport device hopper (TiO2)

Installed in the hopper of the air transport device! Example using the standard type Brody disk (BD-15).

last updated Oct 07, 2024