0481 The silicon disk of this device is highly durable!

The thickness and shape of the disk are also determined with durability in mind! We assist in selecting the model of this equipment and planning its layout according to the customer's situation!

last updated Oct 04, 2024

0480 Powder Coating: Bridging Prevention in the Dust Collector Hopper Section

Change the material of the elastic disk from the standard product (special silicone) to EPDM! Introduction of an example that immediately resolved the bridge phenomenon.

last updated Oct 04, 2024

0479 Solving the bridge of electric furnace dust

Turning on two Brodisks with a time difference! Introduction of an example that solved the bridge of electric furnace dust.

last updated Oct 04, 2024

0478 Small hopper, with fine powdered wheat flour

We assist our customers with selecting models and planning layouts according to their requirements!

last updated Oct 04, 2024

0484 Green tea powder: at the suction hopper

The loan of the equipment sample has been approved after obtaining the consent of the end user!

last updated Oct 04, 2024

0485 Due to poor discharge of activated carbon

Introduction of a case where a user conducted a test, achieved good results, and adopted the actual machine!

last updated Oct 04, 2024

0486 Preventing Clogging of Coffee Grounds

Introduction of a case where the effectiveness of the machine was verified and noise was confirmed, along with the installation of numerous brocade disks!

last updated Oct 04, 2024

0489 Shooting molding machine shoot jam

Countermeasures for blockages in the material supply chute of injection molding machines! The problem is resolved in one go, and we have been introduced to it.

last updated Oct 04, 2024

0488 Rice milling tank residual grains, removal

Prevent damage to the hopper! Introduction of measures to address residual grains at the corners of the corner hopper and the adhesion of bran to the hopper walls.

last updated Oct 04, 2024

0487 Measures to Address Residual Film Grinding Material

Introduction of a case where an agitator was avoided on the accumulation surface (3 surfaces) and a broad disk (standard type) was installed!

last updated Oct 04, 2024

Improvement of poor rubber powder dust emission.

As a bridge measure, one standard Brody disk is installed on each side, totaling four! The results are, of course, good.

last updated Oct 04, 2024

0491 Circle feeder upper silo (charcoal calcium)

Based on past experiences, we can provide suitable arrangements and control examples tailored to the individual conditions of our customers.

last updated Oct 04, 2024

0492 Change existing aeration to this machine (calcium oxide)

The subject is quicklime! After guiding you on the ideal arrangement and control methods, we have received your adoption.

last updated Oct 04, 2024

Installed in the hopper section of the gypsum powder dust collector.

We will help you with a specific layout plan! The installation location is important, so please feel free to contact us.

last updated Oct 04, 2024

0494 To the upper chute of the auger filling machine

The results are good! We would like to introduce a case study of the factory that fills powdered food.

last updated Oct 04, 2024

0495 Attached to transport container box

The results are very good! Smooth discharge and flow of powder and granules can be expected with this equipment.

last updated Oct 04, 2024

0496 Relatively heavy powder rat hole measures

The results are very good! We can provide consultations on various materials, so please feel free to contact us.

last updated Oct 04, 2024

0497 Solving the difficulty of discharging film crushing material.

The trouble was resolved quickly! After suggesting the installation of one unit on each side for the corner hopper, it was implemented.

last updated Oct 04, 2024

0498 Prevention of clogging of flake-shaped chemical products

The discharge issues have been resolved, and operations are running smoothly! It is possible to provide examples of arrangements and controls that are considered suitable, including costs.

last updated Oct 04, 2024

0499 Installation on activated carbon and quicklime silos.

Air aerators are important for placement! We will provide advice on selecting the appropriate model and planning the layout according to the conditions.

last updated Oct 04, 2024

0500 Installed in the high-temperature hopper for wood powder.

We will introduce a case where measures against rat holes were adopted in a hopper containing a large amount of moisture-rich wood powder!

last updated Oct 04, 2024

Clogging of crushed elastomer (TPO) products.

The results are very good! I would like to introduce a case where a total of 3 items were adopted.

last updated Oct 04, 2024

0502 Prevention of Iron Oxide Powder Bridging

The discharge diameter is φ1000, and since the circumference is large, the blow disks are installed in two tiers with a slight height adjustment for the four pieces!

last updated Oct 04, 2024

0503 Heavy calcium carbonate - using a small hopper

Testing conducted by users! Introduction of cases where the Brodisk Mini and controller were implemented.

last updated Oct 04, 2024

0504 At the grain crushing device

Sample pieces are also available! We received high praise from users for "excellent results."

last updated Oct 04, 2024

0505 At the testing equipment of the development department

The hopper has been deformed into a bumpy shape due to hammering! We received high praise for its significant improvement compared to before.

last updated Oct 04, 2024

0506 Quantitative supply machine hopper for lime powder, etc.

Future installation of additional Brodisk is also possible! Examples of installations with Brodisk and controllers.

last updated Oct 04, 2024

0507 Measures for Preventing Adhesion of Chemical Substances

We will promptly respond to your request for lending this equipment and providing sample pieces to confirm the effectiveness!

last updated Oct 04, 2024

0508 Example of Rat Hole Solution for Incineration Ash

Sequentially turn on two Brodisks with a time delay! A case of resolving a problem.

last updated Oct 04, 2024

0509 Measures against rat holes in dehydrated cakes

Confirmed effectiveness with manual air injection! The test results are good, and this is a case where it was adopted along with the controller.

last updated Oct 04, 2024