Installed on the upper hopper of the circle feeder.

Four standard Brodisk units were installed, and their effectiveness was confirmed! They have been adopted for actual use.

last updated Oct 07, 2024

0541 Bridge measures for fibrous materials

After receiving advice on the arrangement of the Brodisk, it was introduced!

last updated Oct 07, 2024

0542 Rat hole measures for silica fume

After discussing the model and layout, the results of the implementation have been as good as expected!

last updated Oct 07, 2024

0543 Special Case with Ceramic Powder

A special case where a rubber sheet with a diameter of approximately 180 mm is installed between the Brody disk and the inner surface of the hopper!

last updated Oct 07, 2024

0544 Improvement measures for the poor discharge of granulated sugar.

Borrowing Brodisk and Brodisk Mini! The results are good and will be adopted immediately.

last updated Oct 07, 2024

0545 Crushed material of insulation for electric wires.

The hopper size is approximately 1000 × approximately 1500! Ultimately, 8 blow discs will be introduced.

last updated Oct 07, 2024

0546 Solving the bridge of urethane fine powder

We recommend the installation of three blow discs near the discharge area, which has resolved the bridging issue.

last updated Oct 07, 2024

0547 Measures to prevent clogging of talc (discharge section φ50)

The blockage near the discharge section has been resolved! Please feel free to consult us about specific arrangements and controls.

last updated Oct 07, 2024

0548 Applicable to the dehydrated cake hopper

It has been confirmed that aeration with the machine allows for discharge without clogging! Application examples of the blow disk.

last updated Oct 07, 2024

0549 Silica Bridge Countermeasures

We would like to introduce a case where the Brodisk was adopted during the update of the hopper!

last updated Oct 07, 2024

0550 Applicable to the hopper for resin compound + glass powder.

Testing conducted by the user, results are good, and implementation! Introducing case studies of Brodisk adoption.

last updated Oct 07, 2024

0551 Adoption of a blow disk for the modification of existing silos.

Both silos are equipped with 8 units! We have great trust in the performance and durability of this equipment.

last updated Oct 07, 2024

0552 Metal powder rat hole measures

The hopper diameter is φ500! Here is an introduction to a case where it was adopted as a measure against rat holes in metal powder.

last updated Oct 07, 2024

Installed in the fly ash bin.

Selected the BD-20 type with a larger air volume than the standard! Application examples of the blow disk.

last updated Oct 07, 2024

Attached to the hopper for film crushing flakes.

Equipped with 4 solenoid valves and 5 blow discs! Notification of optimal arrangement and control according to conditions.

last updated Oct 07, 2024

0555 Installed in the dust collector hopper section (at the refinery)

A simple test was also conducted with a dummy hopper! A case where 16 blow discs were installed.

last updated Oct 07, 2024

0556 At the automobile parts factory (olefin crushed products)

The test results are very good! This is a case where one standard Brody disk was placed on each side, for a total of four.

last updated Oct 07, 2024

0557 To the hopper of flake-like chemicals

Confirm the effects with a loan! We can provide information on model selection, placement, control examples, etc.

last updated Oct 07, 2024

Increase the discharge speed from the silo.

There is a problem with the discharge speed! Here is an example where the discharge speed increased by 2.5 times after the introduction of the Brody disk.

last updated Oct 07, 2024

0559 Attached to the hopper for resin grinding material.

We want to implement cost-effective measures due to rising costs! We will guide you on a rational arrangement of broad disks and introduce case studies of their implementation.

last updated Dec 18, 2024

0560 Countermeasures for Bridge Formation in Positive Electrode Materials of Secondary Batteries

The positive electrode material of secondary batteries is the subject! We can respond individually to your requests.

last updated Oct 07, 2024

0561 Eliminate the bridge in blast furnace cement.

I want to implement bridge measures in response to a trouble occurrence! Here is an example of a case where equipment was provided for free for introduction.

last updated Oct 07, 2024

0562 Eliminate rat holes: Acrylic resin

Installing the Brodisk standard type! We are prepared for the blockage risk caused by the sudden concentration of raw materials.

last updated Oct 07, 2024

Delivery to pharmaceutical manufacturer.

A bridge occurred with the hopper! Introduction of a case where the Brody Disk Mini for pharmaceutical applications was implemented.

last updated Oct 07, 2024

0564 Installation on food additive containers

First, we installed it on one of the many containers! The bridge was resolved without any issues using a Brody disk.

last updated Oct 07, 2024

0565 Promoting the outflow of silica sand

We provide guidance on recommended configurations and installation! We have received high praise for cases where we can now discharge in a shorter time than before.

last updated Oct 07, 2024

0566 Shredded materials from automobile interiors, etc.

The contents are resin molded products, crushed sofa seat materials, and cotton dust, etc.! Examples of issues resolved with this equipment.

last updated Oct 07, 2024

Improvement of the difficulty in discharging mixtures of seeds and fertilizers.

Guidance on compatible models and equipment layout! A rental test was conducted, and there are cases where the results were favorable leading to implementation.

last updated Oct 07, 2024

Preventing bridges in PVC silos

There are virtually no instances of manual hammering! A case study on the introduction of bridge breakers.

last updated Oct 07, 2024

0569 Measures for bridge issues with resin powder

Eliminating the bridge after adding water! A case where the problem was solved with a Brody disk.

last updated Oct 07, 2024