三星工業 三星工業　本社・工場 Official site

Uniform resin content, high heat resistance, high toughness! Capable of molding high-quality CFRP and GFRP.

[Production Equipment] ■ Tow Prepreg Winding Machine ■ Filament Winding (FW) Equipment Dry FW *For more details, please refer to the PDF document or feel free to contact us.

Perfect for molding high-pressure hydrogen tanks for hydrogen fuel cell vehicles!!

〇Mechanical Properties (for Fiber: T800-24K) Tensile Stress: 2,925 MPa Tensile Modulus: 180 GPa 〇Hydrogen Permeability 2.9(10^-11 cc･cm / cm²･sec･cmHg) 〇Curing Conditions 140℃×2.5h

Lightweight, high strength, and easy to handle! Suitable for applications requiring compressive strength, such as structural support materials.

【Other Features】 ＜GFRP＞ ■GFRP specific gravity: 1.9 ■Insulation properties ■Lightweight, high strength (inferior to CFRP) ■Cost-effective ■Thermal insulation effect *For more details, please refer to the PDF document or feel free to contact us.

Used in fields such as aerospace and automotive! We will propose appropriate solutions based on your project's needs.

【Comparison】 <Tow Prepreg (Dry Process FW)> ■ Higher heat resistance, toughness, and quality than FW molding ■ Stable products with consistent resin content (R.C.) and fiber content (Vf) ■ Can be directly wrapped around rotating shafts such as motors for molding and reinforcement <FW Molding (Wet Process)> ■ Capable of large-scale molding ■ More cost-effective than Tow Prepreg molded products ■ Does not use organic solvents *For more details, please refer to the PDF document or feel free to contact us.

We can cover up to mass production and can also handle with supplied materials! We also manufacture molded products using TP.

【Compatible Materials】 ■Fibers: Carbon fiber, glass fiber, aramid fiber, basalt fiber, etc. ■Resins: Epoxy resin, vinyl ester resin, phenolic resin, etc. ■Winding paper tube: Inner diameter φ76mm × length 280mm ■Winding width: 240mm ■Impregnation method: Free dipping (solvent dilution method) *For more details, please refer to the PDF document or feel free to contact us.

It is used to prevent the upper mold from falling when opening the mold during workpiece exchange operations on the press machine!

For more details, please refer to the PDF document or feel free to contact us.

Speedy response with in-house production equipment! We have adhesive bonding and high-precision assembly technology for metal components.

【Other Features】 <Glass Fiber/GFRP> ■GFRP Density: 1.9 ■Insulating material ■Not as strong as carbon, but relatively inexpensive ■Highly versatile FRP ■Used in superconductivity fields due to high thermal insulation properties <Basalt Fiber/BFRP> ■BFRP Density: 1.9 ■Insulating ■Raw material: Basalt ■Price and performance are intermediate between carbon and glass ■Expected to see increased demand in the future *For more details, please refer to the PDF document or feel free to contact us.

Super lightweight! Easily adjust the level of large equipment and work!

〇Specifications - Stroke: 34mm *Adjustable - Height: Adjustable within the range of 1,000 to 1,034mm - Outer diameter of the body: φ93mm (Wall thickness 7.5mm) - Height of the body: 940mm - Diameter of the upper tray: 55mm across (Hexagonal) - Load capacity: 30 tons (Safety factor: 2 times) *Load capacity, stroke, total length, etc. can be customized according to your requirements!! ★Advantages of CFRP Commercial Product This Product Material S45C CFRP Weight 18kg 8kg Load capacity 26 tons 30 tons

For piping that carries highly corrosive liquids! The ends are processed with male and female threads.

For more details, please refer to the PDF document or feel free to contact us.

It is possible to mold high-quality CFRP and GFRP! Intermediate materials that maintain a state of adhesion.

**Production Method** ■ Unwind glass fibers or carbon fibers from a bobbin ■ The unwound fibers are impregnated with resin diluted with organic solvent in a resin bath ■ The fibers pass through a hot air heating furnace to evaporate the solvent, maintaining the adhesive properties in the B-stage (resin is semi-dry) ■ Finally, the fibers are wound onto a paper tube to complete the tow prepreg bobbin *For more details, please refer to the PDF document or feel free to contact us.*

Adhesive bonding of a metal flange to a CFRP pipe! It can be used for valve opening and closing, as well as for power transmission.

For more details, please refer to the PDF document or feel free to contact us.

End bearing adhesion! Can be used as a transport roller for ultra-thin olefin film.

For more details, please refer to the PDF document or feel free to contact us.

Due to its lightweight design, the inertia is small, allowing for reduced motor capacity and achieving energy savings!

【Specifications】 ■Material: CFRP ■Weight: 1/2 of metal ■Rotational speed: 30,000 rpm *For more details, please refer to the PDF document or feel free to contact us.

Adhesion and high-precision assembly technology with metal components! In-house design and manufacturing of molding equipment and jigs.

【Other Features】 <Glass Fiber/GFRP> ■GFRP Density: 1.9 ■Insulating material ■Not as strong as carbon, but relatively inexpensive ■Highly versatile FRP ■Used in superconductivity fields due to high thermal insulation properties <Basalt Fiber/BFRP> ■BFRP Density: 1.9 ■Insulating ■Raw material: Basalt ■Intermediate in both price and performance between carbon and glass *For more details, please refer to the PDF document or feel free to contact us.