島貿易 Official site

A homogeneous mixture of liquid and waxy long-chain non-polar hydrocarbons, the standard for various moisturizers!

【Products (Partial)】 ＜White Vaseline＞ ■White Fonoline ■Super White Fonoline ＜High Purity Grade Vaseline＞ ■Sonnecone DM1 ■Cumulus Ultra Pure *For more details, please download the PDF or feel free to contact us.

We contribute to the stable operation of equipment by removing oxidized contaminants that cause malfunction of servo valves and proportional valves using static electricity. [Available for rental]

【Features】 ■Improved productivity ■Prevention of machine failures and stoppages ■No defective products due to machine malfunctions ■No waste oil, which is a source of environmental pollution ■Removal of oxidized contaminants (varnish, varnish-like substances, oxidation products, oil sludge) enables clean oil management ■Cost reduction achieved through reduced wear loss and energy savings ■Increased productivity due to reduced hydraulic troubles, prevention of short stops, stabilized cycle times, and shortened warm-up periods ■Maintenance of a clean environment through extended oil lifespan 【Product Lineup】 ■EDC-R100M ■EDC-R50N ■EDC-R25 ■EDC-R10 ■EDC-R3P *For more details, please feel free to contact us.*

Introducing the new peptide "BGT(TM) TDP-1," which is expected to provide immediate wrinkle improvement and skin roughness improvement effects!

【Clinical Trial】 ■ A significant reduction in fine lines at the outer corners of the eyes was observed 15 minutes after application. ■ The smoothness of the skin improved significantly. ■ Even with a low concentration formulation, users experienced a notable improvement in wrinkle reduction with prolonged use. ■ It was found that the anti-wrinkle effect increases with the amount of formulation used. *For more details, please refer to the PDF document or feel free to contact us.

Planning, development, manufacturing, and packaging of lubricants (engine oil, gasoline, diesel fuel additives)! Supporting product development for customer brands!

【Basic Information】 ■ Formulation design, manufacturing, and filling of lubricating oil products ■ Flexible response ■ Export support available upon consultation

【Grade chart available!】 Excellent mechanical properties such as abrasion resistance, wear resistance, chemical resistance, oil resistance, and gas barrier properties, ensuring safety and reliability.

For more details, please feel free to contact us.

The evaluation of friction characteristics in the boundary, mixed, and elastohydrodynamic lubrication regions, which can be measured with conventional MTM, can be measured in an environment where a potential is applied between the ball and the disk.

[Options] The entire contact area is captured using an RGB camera, and the film thickness is calculated from the RGB calibration values. The calculated film thickness can be displayed in a 3D image using 3D processing software. *For more details, please download the PDF or contact us.*

We provide additives that can be used for solubilization and absorption enhancement of poorly soluble and poorly absorbable active pharmaceutical ingredients. Our lineup also includes lubricants, masking agents, and controlled-release agents.

【Manufacturer Information and Features】 Manufacturer: Gattefosse Founded in 1880. A French manufacturer of pharmaceutical additives. Manufacturing bases: France, Singapore, United States Research and development bases: France, India, China, United States Equipped with application labs, capable of providing various data according to customer requests. 'Functional Lipid Additives' are fatty acid esters synthesized from polyols and medium- and long-chain fatty acids. They facilitate the solubilization of poorly water-soluble APIs, controlled release, immediate release, bitterness masking, and improvement of bioavailability when administered orally. For transdermal administration, they enable safe and efficient transdermal drug delivery. *For more details, please refer to the PDF document or feel free to contact us.

Heat dissipation materials and heat dissipation adhesives utilizing the technology of a paint company. Low specific gravity, improved cooling efficiency, and enhanced cushioning properties! Cost reduction effects can also be expected due to reduced usage.

【Other Features】 <Silicone-based Thermal Adhesive (Single Component)> ■ For heat dissipation in battery packs, BMS, cooling systems, DC-DC converters, etc. ■ Adhesion between battery modules and lower cooling plates, external shock-absorbing materials <Epoxy-based Thermal Adhesive (Two Component)> ■ Thermal material for ESS, excellent high-temperature reliability ■ For adhesion of ESS modules and packs, heat dissipation, and external shock absorption *For more details, please refer to the PDF document or feel free to contact us.

Recommended for powder product development! We contribute to your research and development and product commercialization with advanced powder measurement technology. [Contract services are also available!]

For more details, please download the PDF or contact us.

We contribute to automation with our robot soft hands, which have a proven track record in many industries. The silicone hands do not damage the objects. Demonstration video available!

There are applications in food, agriculture, pharmaceuticals, automotive, electronic components, automated assembly lines, and AI-utilized warehouses. It can gently grasp objects like a human hand without causing damage, making it safe and secure even when directly handling food. Operating speed: up to 300 CPM Operating accuracy: 0.08 mm Maximum load: 7 kg Limit load: 10 kg Lifespan: 1 million cycles, satisfying the demand in most manufacturing environments. Standards and certifications: FDA, AP, JFSL370 With no complex moving mechanisms and operating solely on a simple pneumatic control circuit, it can be applied to existing manufacturing lines with minimal adjustments. By modularizing, we have maximized the simplification of installation, debugging, and maintenance. Please feel free to contact us. For those who wish to view our product lineup, please download the materials for your review.

Multi-functional water-soluble jojoba esters! Introducing the raw materials handled by Shimada Trading that are gaining attention.

【Usage Instructions】 ■ When mixed with water heated to above 55 degrees, it dissolves completely immediately. ■ In the cold process (room temperature), mix for 5 to 10 minutes until fully hydrated. *For more details, please refer to the PDF document or feel free to contact us.*

Registration for Organic JAS Table 1 suitable materials is complete! Please try the safe mycorrhizal fungi for organic farming and environmentally friendly agriculture.

Mycorrhizal fungi are fungi that have existed on Earth for 400 million years and form a symbiotic relationship with plant roots. It is said that over 90% of vascular plants on Earth form a symbiotic relationship with mycorrhizal fungi. These fungi grow within the plant roots, extending their hyphae into the soil to absorb nutrients (especially phosphorus) and water, thereby activating and promoting healthy growth in plants. Benefits of using mycorrhizal fungi: - Increased yield and improved quality: Efficient absorption of nutrients and water allows for high establishment rates of seedlings and seeds, enabling growth in soils with suboptimal pH levels and salinity, as well as low fertility. - Savings on fertilizers (especially phosphorus): The excessive use of phosphorus fertilizers has become a global issue due to phosphorus resource shortages. Using mycorrhizal fungi can reduce the amount of fertilizer needed, leading to cost savings. About Groundwork: Groundwork, based in Israel, is a leading manufacturer of mycorrhizal fungi products. Despite 60% of its land being desert, Israel is an advanced agricultural country with a food supply rate of over 90%. Through 30 years of research and development, it has established a unique high-concentration mycorrhizal fungi production technology (non-GMO).

The oil film thickness in the elastic fluid lubrication state is measured using the principle of optical interference.

【Specifications】 - Film thickness range: 2 to 1,000 nm - Load: 2 to 50 N - Temperature: Room temperature to 150°C 【Standard Tests】 Oil film thickness measurement Traction coefficient measurement 【Options】 - Oil film thickness distribution measurement

Measuring the skid resistance value of road surfaces. A compact road surface friction measuring device that is easy to carry, simple to operate, and minimizes individual differences among operators.

【Measurement Principle】 ■ Detects the relative deformation of the measuring disk equipped with a flywheel that rotates by a drive motor and three rubber sliders. ■ Measures the frictional resistance between the rubber sliders and the measurement surface.

Concentrated pesticides / alkaline and acidic cleaners / suspensions of abrasives and pigments!

【Product Lineup (Partial)】 ■VAN GEL B General-purpose grade For household, industrial, and agricultural use ■VAN GEL ES Best electrolyte stability For cleaners and cleansers ■VAN GEL O Stabilized with hypochlorous acid formulation For bleach cleaner applications ■VAN GEL SX Blend of bentonite and xanthan gum High performance to increase viscosity Stabilization of emulsions and suspensions *For more details, please refer to the PDF document or feel free to contact us.

We will divide your preferred oil into small portions (500ml). *Available from 1 can (15kg). You can freely customize and blend the oil!

We have a variety of products available, so please feel free to contact us.

We introduce an emollient ester that has excellent skin affinity and is characterized by quick spreading, making it ideal for skincare and sun care applications.

【Overview】 ■Display Name: (Caprylic/Capric) Palm Alkyl ■Chinese Name: Coconut Alcohol - Octanoate/Decanoate ■Function: An emollient ester with good spreadability and a dry feel ■Certification: RSPO-Mass Balanced, COSMOS certified ■Regulation: Compliant with global standards ■Recommended Formulations: Skincare, Sun Care, Makeup, etc. *For more details, please refer to the PDF document or feel free to contact us.

We respond to our customers' needs for advanced material development with our PA・TPAE series plastic materials!

【Specifications】 ■ Polymerized with high-purity polymer fatty acids as the acid component ■ Possesses characteristics not found in general-purpose nylon ■ Low dissolution viscosity 【Lineup】 ■ PA-906M ■ PA-907 *For more details, please refer to the catalog or feel free to contact us.

Manufactured in a GMP-managed pharmaceutical manufacturing facility. Can be used as a tablet excipient.

Japanese Pharmacopoeia Compliant Product

Supplements, health foods, and general foods suitable for children and pregnant women! Expected benefits include brain function support, improved blood flow, visceral fat care, and eye care.

■ The shelf life is an impressive 2 years (at room temperature) We guarantee a shelf life of 2 years from the manufacturing date in a room temperature (below 25°C) environment. (*Limited to OMEGAVIE DHA400 CLEAR ALGAE QS5) ■ High DHA (docosahexaenoic acid) content type available We offer a high-spec grade with a DHA content of 700mg/g (as TG). Since the ingredient is concentrated, it is possible to reduce the amount added to the product. (*Limited to OMEGAVIE DHA700 ALGAE QS5) ■ Products with religious certification We have obtained halal and kosher religious certifications. We can create products that comply with religious certifications. ■ Suitable for vegetarians and vegans This product does not contain animal-derived ingredients. Vegetarians and vegans can obtain docosahexaenoic acid (DHA), which they may lack, from this ingredient. We offer two grades with DHA content of 400mg/g (as TG) and high DHA 700mg/g (as TG). *For more details, please refer to the catalog or feel free to contact us.

A contact angle of just 5 degrees. It is an inorganic binder, so it has high durability. It can be used for construction, building materials, and glass coatings!

【Product Details】 ■Product Name 1. Sera Aqua NS235-N1 2. Sera Aqua NS244-N1.5 ■Ingredients 1. Inorganic Component: Silica complex of polysilicate condensate 2. Solvent: Alcohols, propylene glycol ethers ■Properties Appearance: Colorless transparent liquid Specific Gravity: 0.85 to 0.89 Viscosity: 1 to 3 mPa·s Solid Content: 0.9 to 1.6% ■Hazardous Material Classification Class 4, Type 1 Petroleum ■Storage Stability 3 to 6 months from the date of manufacture

Basic data comparison tests of raw materials are also underway! We respond quickly to customer needs and propose formulations with unique characteristics.

3rd Floor, Shima Building, 2-12-14 Ginza, Chuo-ku, Tokyo 104-0061 TEL: 03-3542-3111 *For more details, please contact us.*

For applications in beverages, aquaculture, water supply and drainage, cooling water, boiler water, and biofouling. A laboratory for conducting operational training and demonstrations is also available.

【Features】 The treated water is uniformly irradiated with ultraviolet light. Due to the use of high-strength quartz tubes and high-output, short medium-pressure UV lamps, handling during maintenance is easy. By continuously monitoring the irradiation amount with two sensors, it is possible to automatically control the necessary UV dosage. It continuously records essential data during operation, such as UV transmittance, treated water volume, water temperature, UV irradiation amount, and lamp intensity. 【Specifications】 Lamp used: Medium Pressure High Intensity UV Lamp Lamp capacity: 1 to 4.2 kW per unit Maximum treatment capacity: Depends on the transmittance of the treated water and the required irradiation amount. *For more details, please refer to the product catalog or contact us.

We will expand the sales of raw materials and provide technical support to customers by acquiring data in-house and deepening our understanding. Our researchers are well-versed in pharmaceuticals.

For more details, please feel free to contact us!

Quality control through analysis tests at our own facilities, handling a wide range of grades from low viscosity to high viscosity products.

【Lineup】 Product Name ／ Viscosity cSt@40℃ ／ Viscosity SUS@100°F HYDROBRITE・380 PO ／ 70.0-90.0 ／ 380 Kaydol ／ 66.3-68.7 ／ 350 Carnation ／ 11.5-13.6 ／ 70 Lytol ／ 3.9-5.0 ／ 40

Would you like to expand your products, from chemical products to automotive components, in the United States?

For more details, please refer to the related links or feel free to contact us.

Harmful to the human body! It has very low skin irritation, and has been widely adopted not only in cosmetics but also in the base materials for topical medications and various pharmaceutical products.

【Lineup】 Product Name ／ Viscosity cSt@40℃ ／ Viscosity SUS@100°F HYDROBRITE・380 PO ／ 70-90 ／ 380 Kaydol ／ 64.5-69.7 ／ 350 Blandol ／ 14.2-17.0 ／ 85 Carnation ／ 10.8-13.6 ／ 70 Lilac ／ 3.9-5.0 ／ 40 Lytol ／ 3.9-5.0 ／ 40

We are the agent of Sonneborn, a leading global supplier of liquid paraffin with a history of 100 years.

【Lineup】 <Product Name (Viscosity cSt@40℃ / Viscosity SUS@100°F)> ■HYDROBRITE・380 PO (70-90 / 380) ■Kaydol (64.5-69.7 / 350) ■Blandol (14.2-17.0 / 85) ■Carnation (10.8-13.6 / 70) ■Lilac (3.9-5.0 / 40) ■Lytol (3.9-5.0 / 40) *For more details, please refer to the PDF document or feel free to contact us.

[Application Development / Application Recruitment] Insulation with a thickness of 2mm that protects against heat of 1000°C, keeping the surface at 100°C! Combines high insulation performance with thinness and flexibility to protect the target object.

For more details, please refer to the PDF document or feel free to contact us.

For creating products with assured quality! This is a lineup of jojoba oil certified by 【COSMOS/ECOCERT/USDA】.

Display Name: Jojoba Seed Oil INCI Name: Simmondsia Chinensis (Jojoba) Seed Oil Chinese Name: Jojoba (SIMMONDSIA CHINENSIS) Seed Oil CAS #: 61789-91-1 EC #: 612-381-6

Powerful deodorization and sludge decomposition without the use of chemicals. Significant reduction in the cost of replacing booth water. Shimatrade is the sales agent for Environmental Development Research Institute Co., Ltd.

It is also effective for the purification of treated water containing organic substances, such as pre-treatment water for painting and pre-treatment water for plating. 【Specifications (Basic Type)】 Treatment Capacity: 1 to 5 tons Treatment Time: Deodorization approximately 3 hours/5 tons Decolorization approximately 48 hours/5 tons Pump Flow Rate: Feed 100L/min Return 150L/min Ozone Generation: Approximately 20g/hour Oxygen Supply: 4L/min Discharge Ozone Concentration: Below 0.1ppm Operating Ambient Temperature: Below MAX 40℃ External Dimensions (excluding protrusions): W800×D600×H1800mm Power Supply: AC100V 50/60Hz Air Source: 0.4MPa/cm3 75L/min Power Consumption: Approximately 1kW *For more details, please refer to the materials. Feel free to contact us with any inquiries.

"Microplastic alternative" retains UV shielding effects while improving usability and dispersibility.

For more details, please refer to the catalog or feel free to contact us.

It features a sustainable, mochi-like foam texture. A transparent formulation is possible.

We have a variety of products available, so please feel free to contact us.

Introducing D5 alternative silicone. We offer a variety of options, including short-chain dimethicone and methyl trimethicone, which is characterized by its silky feel!

We have a variety of silicone products available, so please feel free to contact us.

It measures viscosity under HTHS (High Temperature High Shear) conditions with high temperature accuracy.

【Specifications】 - Shear rate: 10^6 to 10^7/s - Temperature: 40 to 150°C 【Standard Test】 - Viscosity measurement

Reproducing rolling contact fatigue (RCF) due to pitching under lubricated/non-lubricated conditions.

【Specifications】 Load: 100–1250N Speed: 0–4m/sec (depending on slip rate) Temperature: Room temperature to 135℃ 【Standard Test】 Pitching Test

Proposed as cosmetic ingredients for various uses! *Manufacturer's materials related to [skin, oral, and intestinal care] with numerous effects and benefits are available for download.

For more details, please refer to the catalog or feel free to contact us.

Establish a parts and consumables storage to strengthen the after-sales service system. 【Conduct operational training and demonstrations!!】

3rd Floor, Shima Building, 2-12-14 Ginza, Chuo-ku, Tokyo 104-0061 TEL: 03-3546-3135 *For more details, please contact us.*

We offer formulations for various cosmetics using environmentally friendly organic materials!

The structure of alginate is a linear polymer composed of two types of uronic acids, mannuronic acid and guluronic acid, connected randomly. The structural units formed by the multiple connections of these two types of uronic acids are referred to as M blocks, G blocks, and random blocks, depending on the composition of the uronic acids. The higher the proportion of M blocks, the softer the material, while the higher the proportion of G blocks, the harder and more brittle it becomes, determining the gelation properties of alginate. The composition ratio of these blocks (M/G ratio) varies depending on the type and part of the raw algae, allowing for adjustments by carefully selecting the raw materials used.

The paper has been published! Animal Science Journal (ASJ) - Maintaining health with naturally sustainable prebiotic ingredients.

<<Various tests have been conducted in collaboration with domestic universities.>> We are verifying functionality based on scientific data. Examples: Improvement of villi length, improvement of leaky gut, enhancement of palatability and weight gain, production of short-chain fatty acids, improvement of intestinal environment. Labeling and Safety, Related Regulations Product Name: Fibregum feed Category: A feed Type of Feed: Gum Arabic Raw Material Origin: Sap from Acacia trees Packaging: 25 kg craft bags Certifications: U.S. GRAS substance GMO Information: GMO-free Product Quality Standards Appearance and Characteristics: Light brown to brown granular powder Dietary Fiber: Over 80% (over 90% on a dry weight basis) pH: 4.1 to 4.8% (25% aqueous solution, 20°C) Viscosity: 60 to 130 cps (25% aqueous solution, 20°C) Total Viable Count: Less than 1,000 CFU (ISO 4833) E. coli: Negative/5g (ISO 7251) Salmonella: Negative/25g (ISO 6579) Storage Conditions: Store in a cool, dark place, avoiding high temperatures, humidity, and direct sunlight. Quality Assurance Period: 3 years from the date of manufacture Packaging: 25 kg bags

Excellent compatibility with additives! Not only does it have protective barrier properties, but it can also be used as a carrier for various active ingredients.

For more details, please refer to the catalog or feel free to contact us.

[High capacity, long life, high voltage] From small mobile and wearable batteries to batteries for vehicles such as EVs and PHVs. We have a wide range available!

For detailed explanations and sample requests, please feel free to contact us.

[In-house quality control] Highly refined ointment substances. White to yellow, hard to soft, low melting point grade, available in plant-based petroleum jelly grade.

【Lineup】 Product Name ／ Melting Point ／ Viscosity Alba Protopet ／ 54.4-60.0 ／ 180-210 White Protopet 1S ／ 51.7-57.2 ／ 170-200 Yellow Protopet 2A ／ 54.4-60.0 ／ 180-215 Perfecta ／ 57.2-60.0 ／ 180-200 White Fonoline ／ 52.8-58.3 ／ 210-245 Special White Petrolatum-G ／ 51.7-57.2 ／ 165-175 Special White Petrolatum ／ 51.7-57.2 ／ 175-190 SonneconeCM・DM1 ／ 38.0-51.6 ／ 240-300 *This is a petroleum jelly that spreads easily on the skin like silicone and has a pleasant texture. *Other unlisted grades are also available, so please feel free to inquire.

Prevents dirt by repelling dust. Usable on concrete, stone, and painted surfaces. [Ceramic Coating Surface Protector: Sera Aqua DC Coat]

【Product Details】 ■Product Name 1. Sera Aqua DC-40 2. Sera Aqua DC-20 3. Sera Aqua AC-25 4. Sera Aqua DC-HB15 5. Sera Aqua DC-TBZR ■Ingredients Isopropanol, alkoxysilane hydrolyzed condensate, methanol, and amorphous silica ■Properties and Chemical Characteristics Appearance: Milky transparent liquid Viscosity: 5 CP (20°C) Specific Gravity: 0.90 (20°C) Solubility: Slightly soluble in water, easily soluble in alcohols and ketones

Example of products: hazardous materials, paints, organic solvents, rust inhibitors, cleaning agents, release agents, processing oils. Optimal proposals with a global production system! (Narita, Thailand, China)

For more details, please refer to the catalog or feel free to contact us.

This is a lubricant additive made from plant-derived tall oil! It reduces total costs by lowering the usage of various additives! It serves as a rust inhibitor, emulsifier, and cleaning agent.

Generic name: C21 dibasic fatty acid Manufacturer name: Ingevity Corporation Acid value mgKOH/g: 265-277 Flash point (C.O.C.): 235℃ Color (Gardner): 7-9 *For more detailed information, please download the materials or feel free to contact us.*

A new low-melting point vaseline with a silicone-like texture, "SonneCone."

【Lineup】 Product Name ／ Melting Point SonneCone ／ 38.0-51.6

We maximize the removal of metallic foreign substances, ensuring quality improvement and safety from materials to finished products!

For detailed explanations, please feel free to contact us.

From Israel! Enzyme-derived Levan from sugarcane [*Evaluation data confirming the effects on skin resident bacteria and the promotion of skin proliferation speed can be provided based on human skin.]

★Dead Sea & Arava Company Testing Procedure★ 【Skin Preparation】 Human skin organ culture is obtained from healthy patients who have undergone cosmetic plastic surgery. *Details of this procedure are published in "Test Data: Evaluation of ECM (Extracellular Matrix) Reconstruction."*

Cosmetic ingredient similar to petroleum jelly made only from naturally derived materials (patent pending).

【Lineup】 Product Name / Melting Point SonneNatural Select Meadowfoam Seed Oil Enhanced / 48 SonneNatural Select Jojoba Oil Enhanced / 49 SonneNatural Select Extra Virgin Olive Oil Enhanced / 50 SonneNatural H-203 / 49 SonneNatural J-207 / 46

White to yellow, hard to soft, low melting point grade, available for plant-based petroleum jelly grade.

【Lineup】 Product Name / Melting Point Alba Protopet / 54.4-60.0 Super White Protopet / 54.4-60.0 White Protopet 1S / 54.4-60.0 Yellow Protopet 2A / 54.4-60.0 Perfecta / 57.2-60.0 Super White Fonoline / 50.0-56.1 White Fonoline / 52.8-58.3 Yellow Fonoline / 52.8-58.3 Petrolatum WP-2395 / 54.4-60.0 Special White Petrolatum / 51.1-57.2 Snowwhite N / 54.0-60.0 Sonojell #9 / 41.7-48.9 Snowwhite Special / 53.0-59.0

The patented oxidation delay technology prevents oxidation and reduces fishy odor! With a high DHA content of 70%, it allows for smaller soft capsules and a reduced intake amount.

Omegavie Marine Product Grade List ◎ OMEGAVIE DHA 80 TG Quality Silver Ice (DHA 80%) ◎ OMEGAVIE DHA 70 TG Quality Silver Ice (DHA 70%) ◎ OMEGAVIE EPA 70 TG Quality Silver Ice (EPA 70%) ◎ OMEGAVIE 3030 TG Quality Silver Ice (EPA 30% / DHA 30%) ◎ OMEGAVIE 1812 TG Quality Silver Ice (EPA 18% / DHA 12%)

DHA and EPA can be used for various applications that were difficult with oil alone! "Omega V Powder 100" has excellent emulsification stability and heat resistance.

DHA and EPA are... DHA (docosahexaenoic acid) and EPA (eicosapentaenoic acid), which are n-3 fatty acids, are 'essential fatty acids' that are hardly synthesized in the body and must be obtained through diet as important nutrients. The Ministry of Health, Labour and Welfare recommends a daily intake of at least 1g of DHA and EPA in the "Dietary Reference Intakes for Japanese (2010 edition)." [Generally expected effects] - Lowering triglycerides and cholesterol levels - Components that promote smooth blood = prevention of arteriosclerosis and cerebral infarction - Improvement of blood circulation = increased metabolism, skin beautification effects - Activation of the brain = prevention of dementia

When water is added, the film quickly dissolves, allowing the beauty ingredients to penetrate the skin. Various beauty ingredients provide moisture. Customization is also available.

Island Trade Lab researchers are dedicated to developing specialized formulations! We offer high-quality formulations created by specialists in skincare, haircare, and cleansing. "I want a 100% plant-based formulation!" "I want to focus more on the texture!" "I absolutely want this ingredient included!" We will develop formulations tailored to your requests.

For the raw materials of pharmaceutical tablets (for sustained release of active ingredients and taste masking), as well as for thickening and dispersing agents in pharmaceutical-related products such as lotions, creams, and medicated shampoos!

【Product Lineup (Partial)】 ■VEEGUM R General Grade Aluminum Magnesium Silicate NF Type IA ■VEEGUM HV High Viscosity Grade Aluminum Magnesium Silicate NF Type IC ■VEEGUM K Compatibility with Strong Acids and Electrolytes For Oral Suspensions Aluminum Magnesium Silicate NF Type IIA ■VEEGUM HS Highest Stability to Electrolytes Minimum Acid Demand Refined Bentonite NF *For more details, please refer to the PDF document or feel free to contact us.

For thickening and dispersing agents in lotions and creams! *Products with ECOCERT and COSMOS certification are also available.

【Product Lineup (Partial)】 ■VANATURAL Fast-hydrating bentonite Stabilizer for emulsions and suspensions with natural, organic ingredients OMRI/ECOCERT/COSMOS grade ■VANATURAL MC Fast-hydrating bentonite Stabilizer for emulsions and suspensions Controls microorganisms ■VANATURAL XGB Blend of bentonite and xanthan gum Fast-hydrating stabilizer for water-based emulsions and suspensions ECOCERT/COSMOS grade ■VANATURAL CA Fastest hydrating grade Acidic dispersion For weakly acidic topical applications ■VEEGUM ULTRA Fastest hydrating grade Unique whiteness, acidic dispersion, for weakly acidic topical applications ■VEEGUM EZ Fastest hydrating grade Acidic dispersion, for weakly acidic topical applications ■VEEGUM Pure Product with special processing for natural and organic applications OMRI/ECOCERT/COSMOS grade *Other grades are listed under 'Applications/Examples of Achievements'

【Ideal for oil leak/contamination inspection】Marktech's battery-operated LED black light, designed for ease of use and to meet the demands of harsh inspection environments.

【Specifications】 - Dimensions/Weight: Fixture: 155W × 80D × 180H mm / 640g (including battery) - Standard components: Fixture body, battery, charging adapter, UV protection glasses, strap, carrying case *For detailed specifications, please download the catalog or contact us.

It automatically measures the traction (friction) coefficient with a maximum load of 1,650N.

【Specifications】 Load: 100 to 1,650 N Speed: 1 to 3,500 mm/sec Slip rate: -10,000 to 10,000% Temperature: 10 to 150℃ 【Standard Test】 Measurement of traction coefficient 【Options】 Measurement of tribofilm on the test specimen

Incell possesses innovative small cell package technology and BMS technology, enabling the production of various secondary battery products (modules, cabinets).

【Differentiation from Competitors】 1. Safety of Cells (Battery Cell) : Achieves high safety unique to cylindrical cells and ensures stable supply 2. Safety of Battery Packs : High proprietary safety control technology certified by Samsung SDI : High proprietary BMU technology and safety control technology certified by Korea Electric Power Corporation 3. Price Competitiveness : Secures price competitiveness against lead batteries 4. Diversity of Cell Options : Rich variety of cells for different applications (NCA, NMC, etc.) 5. Strengths : Proven track record specialized in industrial equipment worldwide (energy storage systems, communication equipment, mobility sector, special fields) : Customizable to meet Japanese customer needs

Characterized by a soft nature! Proven track record in a wide range of industries, including food, cosmetics, toothpaste, laminates, and sealants. Multiple grades available for different colors, melting points, and penetration degrees.

【Lineup】 Product Name ／ Melting Point Multiwax W-445 ／ 76.7-82.2 Multiwax W-835 ／ 73.9-79.4 Multiwax ML-445 ／ 76.7-82.2 Multiwax 180-M ／ 79.4-86.7

Automatically measures the traction (friction) coefficient in boundary lubrication, mixed lubrication, and elastohydrodynamic lubrication.

【Specifications】 Load : 0 to 75N Speed : -4 to 4m/s Slip Rate : -10,000 to +10,000% Temperature : Room temperature to 150℃ 【Standard Test】 Measurement of traction coefficient 【Options】 Measurement of tribofilm on test specimen Measurement of electrical resistance at contact area Low load (soft contact) test Pin-on-disk test Reciprocating sliding test