米倉製作所 Official site

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

【Other Features】 ○ The emitted infrared radiation light is efficiently reflected and concentrated, further enhancing high heating capability. ○ With a low heat capacity heating lamp and a cooled high-reflectivity mirror, the furnace's heat capacity is minimal, allowing for rapid heating and cooling. ○ Due to its vacuum airtight structure (patent pending), direct radiation heating is possible, enabling clean and rapid heating and cooling. ○ High-temperature microscopic observation can be easily performed. 【Product Lineup】 ○ IR-HP (6 Parabolic Surface Radiation) → Rapid heating and cooling from six directions significantly expands the temperature distribution area compared to conventional heating furnaces. ○ IR-QP (4 Elliptical Shared Concentration) → Rapid heating and cooling from four directions doubles the temperature distribution area and rapid heating compared to conventional heating furnaces. ○ IR-TP (2 Elliptical Shared) → Rapid heating and cooling from two directions enables microscopic observation compared to conventional heating furnaces. ● For more details, please contact us or refer to the catalog.

High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

【Specifications】 ■ System Name VL3000DX-SVF18SP ■ Configuration [ Leather Head VL3000DX ] [ Heating Device SVF18SP ] ■ Options [ Heating Load Device SVF12FYC ] * Specifications are subject to change without notice.

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

【Specifications】 《Tensile Module》 　Load Capacity: 2kN (200kgf) or 5kN (500kgf) 　Test Speed: 0.001 to 10mm/min 　Effective Length of Specimen: Up to 60mm 《Heating Furnace》 　Heating Method: Infrared two-elliptical-cylinder concentrated heating method 　Temperature Range: 60 to a maximum of 1500℃ 　Temperature Control: Digital program PID-SCR control 《Observation》 　Objective Lens: Long working distance (×5, 10, 20, 50), low magnification zoom lens, variable magnification microscope 　Atmosphere: In air, in gas flow, in vacuum 　XY Stage: X-axis ±50mm / Y-axis ±10mm *For more details, please refer to the materials. Feel free to contact us with any inquiries.

"Heating and Cooling Observation Device MHO-300-2" Just place it on your microscope! Compact and slim / Atmosphere control available.

【Specifications】 ■ Product Name Heating and Cooling Observation Device MHO-300-2 Temperature Control: RT+20℃ to 300℃ Cooling Mechanism: -100 to 200℃ Heating/Cooling Rate: 100℃/min Heating Control Accuracy: Within ±1℃ Heating Area: 20×20 mm ■ External Dimensions and Utility External Dimensions: 85mm×155mm×30mm (excluding protrusions) Holder: 75mm×25mm (specimen size) Rated Power Supply: AC100V-5A ■ Options - Gas inlet, sample current port, rotary pump for vacuum - Water circulation device (for heating/cooling the stage outer wall) - Programmable temperature software, temperature display video recording software 【Target Materials】 This device can be used for material research in chemistry, polymers, and semiconductors, as well as in fundamental research fields in biology and medicine, to visualize thermodynamic phenomena under a microscope.

It is a compactly designed high-temperature heating observation device. It can be used on your microscope or micro-scope.

【Specifications】 ○ Temperature range: +50 to 1500℃ ○ Heating characteristics: 60 seconds from room temperature to 1500℃ ○ Heating method: Infrared emission and reflection concentration heating ○ Cooling method: Natural air cooling ○ Atmosphere: In air, gas flow, or vacuum ○ Achievable vacuum level: Approximately 5Pa ○ Sample container: Outer diameter φ5×4mm, φ6.5×4mm ○ Safety measures: Furnace body temperature sensor ○ Temperature control: Digital program PID-SCR control ○ Temperature program: 16 segments, 16 patterns ○ Temperature sensor: JIS R type thermocouple ○ Power consumption: 500W/100V ● For more details, please contact us or refer to the catalog.

We will achieve on-site observation of micro-mount components such as chip components, melting of solids and powders, and soldering on substrates (□100mm)!

■Specifications Temperature range: RT to 1300°C (depends on the thermal capacity of the sample, etc.) Atmosphere: High-purity gas after vacuum evacuation; in gas flow Achievable vacuum level: Approximately 10 Pa to (depends on the pump's capability) Vacuum port: NW25 Sample stage: □100mm Heating method: Infrared lamp emission and reflective concentrated heating Cooling method: Natural cooling by turning off the lamp (rapid cooling available as an option) Heating characteristics: Up to 1000°C within 20 seconds (depends on the thermal capacity of the sample) Safety measures: Standard equipment: Furnace outer wall temperature sensor; temperature deviation Options: Over-temperature protection ■Options - Vacuum evacuation device Selectable from rotary pumps to turbo pumps according to the desired vacuum level - Gas introduction device Selectable from float-type flow meters to mass flow meters Gas can be introduced or switched at specified timings by turning the solenoid valve ON and OFF - Gas cooling mechanism Directly applies gas to the sample using a rapid cooling nozzle Rapid cooling is performed at specified timings by turning the solenoid valve ON and OFF

The state of the sample being heated can also be observed through the observation windows on the top and side! Automatic calculation of contact angles and wettability from image data is also possible! *Demo available now.

【Other Features】 ■ Compact size of 162W×160H×382L mm ■ Sealed structure inside the furnace allows for vacuum and gas equipment ■ Clean heating environment possible due to lamp heating ■ Rapid heating possible with optional rapid cooling mechanism ■ Can be combined with zoom lenses and microscopes ■ Optional feature allows for observation of samples during heating while attaching temperature and time for video recording 【Specifications】*Excerpt ■ Observation mechanism: Low magnification (7x) to high magnification (over 500x) ■ Heating method: Infrared 5 parabolic reflector heating method ■ Temperature range: RT to 1300℃ ■ Heating speed: Over 1000℃/min ■ Heater: 200V-1kW or 1.5kW or 2kW × 5 units (determined by temperature and sample) ■ Required power supply: 200V-25A or 37.5A or 50A (depending on lamp specifications) ■ Atmosphere control device: - Gas introduction mechanism (manual, automatic, flow adjustment, multiple gas types) - Vacuum gas replacement mechanism (manual, automatic, pump types) 【Application Specifications】 ■ Temperature range: RT to 1300℃ ■ Heating area: 10 mm square ■ Atmosphere: Atmospheric, inert gas, vacuum ■ Observation direction: Horizontal, vertical ■ Comes with automatic contact angle measurement software

High-speed heating up to 1700℃ is possible, and it can also maintain that temperature!

【Features】 ○ Capable of heating up to 1700°C through focused heating of samples only ○ Achieves high-speed heating of over 1000°C/min with low power consumption of just 4kW (8kW) using halogen heaters ○ Equipped with an observation window → Allows observation of the sample's condition during heating ○ Compact size → 120W×115H×282 (382)L mm (excluding protrusions) → Enables heating without taking up much space ○ Sealed structure inside the furnace → Capable of vacuum and gas operation → Standard equipped with vacuum inlet and gas inlet ○ Allows heating in a clean environment due to lamp heating ○ Rapid heating possible with optional rapid cooling mechanism ○ Can be combined with a microscope in a separate lineup ※ Direct viewing not possible at high temperatures ○ With an optional feature, it is possible to observe the sample during heating while attaching temperature and time for video recording 【Specifications】*Excerpt ○ Heating method: Infrared focused heating method ○ Temperature range: RT to 1700°C ○ Heating speed: Over 1000°C/min ○ Heater: 200V-1kW (200V-2kW) × 4 units ○ Required power supply: 200V-30A (45A) ● For more details, please contact us or download the catalog.