Analysis of organic-inorganic composite materials using FT-IR and EDX.

アイテス

We will introduce an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of a PET bottle label, and the IR spectra differed between the glossy and non-glossy areas. Since the non-glossy area resembles the spectrum of acrylic resin, it is considered that the main component is acrylic resin. Additionally, SEM-EDX measurements were performed on both the glossy and non-glossy areas, and EDX spectra and backscattered electron images were obtained, revealing that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area.

Date and time
Capital
Entry fee

Related product information

Analysis of organic-inorganic composites using FT-IR and EDX.
Here is an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX!

For more details, please refer to the PDF document or feel free to contact us.
Micro FT-IR
This year, we are introducing new additions! We will introduce the features of the three basic measurement methods.

【Features of Other Measurement Methods】 ■ATR Method - Infrared light is irradiated onto the sample through a crystal, and the light that slightly penetrates the sample at the crystal interface is measured. - Information from a sample surface layer of about a few micrometers is obtained. *For more details, please download the PDF or feel free to contact us.
Chemical Analysis Trust Service
Sample 1, including comparison with Ref! Summarize and conduct candidate analytical methods.

For more details, please refer to the PDF document or feel free to contact us.
[Data] Analysis and evaluation of organic materials and polymer materials.
Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

For more details, please refer to the PDF document or feel free to contact us.
Flow of Chemical Analysis
Clarifying the functions, characteristics, and conditions of products and materials. We propose analytical methods tailored to the analysis target and purpose.

Our company provides various services that support the development and manufacturing of semiconductors, displays, organic EL, solar cells, and electronic components. If you are facing issues with product development, defect/failure analysis, or reliability evaluation, please feel free to consult with us.
Tabletop SEM (Scanning Electron Microscope) 'TM3030Plus'
Observation of samples and elemental analysis are possible! It can be utilized not only in the semiconductor and electronic components fields but also in life sciences and biological fields.

【Specifications】 ■ Acceleration Voltage: 5kV (surface), 15kV (normal, analysis) ■ Maximum Sample Size: 70mm ■ Maximum Sample Thickness: 50mm ■ Electron Gun: Tungsten Filament ■ Detectors ・High-sensitivity Semiconductor-type Reflective Electron Detector ・High-sensitivity Low Vacuum Secondary Electron Detector ■ Observation Modes ・Conductor (Analysis Mode) ・Standard ・Charge Reduction (Low Vacuum) ■ Analysis Device: Bruker AXS QUANTAX Xflash 430H *For more details, please refer to the PDF document or feel free to contact us.
Total support service for chemical analysis
We conduct surface analysis, foreign substance analysis, and organic composition analysis.

For more details, please refer to the PDF document or feel free to contact us.