About the curing temperature of epoxy resin free from hazardous substances.

アイテス

We conducted measurements to reconfirm the temperature of heat generation during curing, following the change to a non-toxic epoxy resin. When using a large amount of resin, we apply heat generation prevention treatment for resin embedding. Without this treatment, the temperature can rise up to 138°C during curing. However, by applying the heat generation prevention treatment even with a large amount of resin, we were able to keep the heat generation during curing within 30°C.

Date and time
Capital
Entry fee

Related product information

About the curing temperature of epoxy resin free from hazardous substances.
We conducted measurements to reconfirm the temperature at which heat is generated during hardening!

For more details, please download the PDF or feel free to contact us.
Analysis of the assembly joints of the implemented components
By applying chemical etching, ion milling, and FIB processing to mechanical polishing, we will analyze various metal joints, starting with lead-free solder.

■Mechanical polishing of the substrate bonding area + Chemical etching + Ion milling Observation using optical microscope and SEM ■Cross-section creation using FIB Observation using SEM
Total support service for cross-sectional grinding, processing, observation, and analysis.
We undertake contract processing and manufacturing of cross-sections of various parts and materials.

For more details, please refer to the PDF document or feel free to contact us.
Cross-sectional observation pre-treatment (sample cutting and resin embedding)
We will introduce the pre-treatment for cross-sectional observation using devices for sample cutting, such as band saws!

For more details, please refer to the PDF document or feel free to contact us.
Cross-sectional polishing service for implementation parts and electronic components.
Each part is carefully polished by hand, using an efficient process without waste!

For more details, please refer to the PDF document or feel free to contact us.
Regarding the curing temperature of epoxy resin during sample encapsulation.
Even with larger-sized implementation boards, resin embedding is possible without cutting before embedding! We will introduce cases with and without heat generation prevention treatment.

For more details, please refer to the PDF document or feel free to contact us.
Measurement of solder crack rate by cross-sectional observation.
Calculating the crack rate of ball joints and implementing it according to customer specifications!

For more details, please refer to the PDF document or feel free to contact us.
Introduction to Cross-Section Processing and Observation Methods
Mechanical grinding allows for a wide range of processing and observation! We will propose appropriate processing and observation methods or combinations.

For more details, please refer to the PDF document or feel free to contact us.