All products and services
211～240 item / All 366 items
-
[Data] IR analysis of vinyl polymers (resin materials)
Introducing the results of IR analysis conducted on polystyrene, polyvinyl chloride (PVC), and others!
last updated
-
Simple measurement of band gap using XPS.
It is possible to measure simply using XPS! Please inquire about semiconductors other than oxide-based ones.
last updated
-
[Information] We will solve the cause of the issue from a chemical perspective.
Solve the cause of the problem from a chemical perspective! Introducing methods to approach it through chemistry and reaction mechanisms.
last updated
-
Analysis of pigments and polymers using MALDI-TOFMS.
Detect the mass number as an absolute value! You can obtain information about the composition of the compound.
last updated
-
Structural analysis of Nylon 6.10
We will elucidate the characteristics at the molecular level using our FT-IR and thermal decomposition GC-MS!
last updated
-
Identification of failure locations in electronic components through thermal analysis.
It is possible to perform non-destructive testing from fault location identification to internal observation! High-precision identification of heat generation areas can be achieved.
last updated
-
[Example of TOF-SIMS] Analysis of Li
It is possible to detect with high sensitivity! We will introduce a case comparing the analysis of Li using TOF-SIMS and SEM-EDX.
last updated
-
X-ray observation of electrolytic capacitors
We conducted visual inspections and internal observations using X-ray CT for normal products and degraded products!
last updated
-
Observation of diamond clarity
A microscope allows you to observe tiny defects that cannot be seen with the naked eye!
last updated
-
Evaluation of distortion and birefringence of products/materials by WPA.
By evaluating the orientation, strain, and birefringence of the material, you can understand the internal stress and strain state!
last updated
-
FT-IR analysis of polyethylene
Analyze subtle spectral differences using FT-IR! We can also accommodate reliability tests combined with high temperature, cold heat, and more.
last updated
-
Oblique CT observation of the laminated substrate.
In a multilayer substrate, it is possible to obtain information for each layer! By using a length measurement tool, you can measure the length.
last updated
-
Measurement of solder crack rate by cross-sectional observation.
Calculating the crack rate of ball joints and implementing it according to customer specifications!
last updated
-
Characterization of materials using a ultra-micro hardness tester.
From the load-displacement curve of ultra-microhardness measurement, the characteristics of various materials become apparent!
last updated
-
Ion Chromatography Analysis Case (Solid Surface)
Suitable for relative comparison of flat samples such as printed circuit boards! Introducing the analysis flow of liquid samples and solid surfaces.
last updated
-
FT-IR analysis of ABS resin
Identifying substances through various approaches such as insights, spectral analysis capabilities, and other analytical methods.
last updated
-
Evaluation of distortion and birefringence in plastic molded products.
It is possible to visualize birefringent phase differences (distortion) and the flow direction/stress direction (principal axis orientation)!
last updated
-
Observation of the coating film
Introducing examples of observation and analysis of coating films used in various products, including "microtomes" capable of planar inclined cutting!
last updated
-
Color evaluation of paint using a colorimeter.
It is possible to quantify the color of objects! We will introduce test results that quantify the differences in color.
last updated
-
[Document] Mass Spectrometry Guide
Analyze using information obtained from various analytical methods such as functional groups and skeletal structures! Introducing the mass spectrometry guide.
last updated
-
Evaluation of TFT characteristics of liquid crystal panels
We can perform good product characteristic measurements for performance verification, as well as defective characteristic measurements and reliability evaluations!
last updated
-
Case study of fisheye analysis of laminate film.
It has been determined that the cause is due to cured ink adhering to the printed surface of the printed PET film!
last updated
-
Case Study of Foreign Matter Analysis in Laminating Film
Focusing on the position and composition of the foreign object! We prepared a cross-section of the foreign object and conducted elemental analysis.
last updated
-
LCD Panel Analysis Data Collection
If you're having trouble with LCD analysis, we at ITES are here to help you find a solution!
last updated
-
Example of EPMA analysis using the guide network map method.
Comprehensive analysis is possible! Here are examples of analysis using the EPMA guide network map method.
last updated
-
Observation of Pb-free solder cross-section after reliability testing.
Three types of Pb-free soldered products were subjected to reliability testing! We will introduce the main objectives of each test and the results of cross-sectional observations.
last updated
-
The microtome's blade (knife) is its lifeline.
Using glass knives and diamond knives for sample cutting! Introducing with examples of cross-sectional observation.
last updated
-
ESD (CDM) Testing Outsourcing Service
Reliable application with the contact confirmation function of the applied pin! Compatible with direct charging method and electric field induction method.
last updated
-
ESD (HBM・MM) Testing Contract Service
From DUT board production to testing! We propose and conduct tests according to your requests and objectives.
last updated
-
Liquid tank thermal shock test LED power supply
By using a constant monitor, it is possible to confirm change points! Let us introduce our reliability testing.
last updated