• 

  Strainer(1)

  Here is an introduction to our strainer. We offer the "LKSF," which can be used for a wide range of applications in process filtration when a sanitary specification strainer is required.

• Ice cream freezer(2)

  Our company offers continuous ice cream freezers with capacities ranging from approximately 40 l/h to 4,500 l/h (10 US gallons/h to 1,190 US gallons/h), allowing for the flexible handling of numerous recipes by freezing, stirring, mixing, and aerating ice cream mix in the optimal way to produce delicious ice cream suitable for all tastes and situations. One of its features is a highly controllable freezing process, which enables the production of a consistent final product that makes the differences between products made in the morning and those made at night negligible. Efficient heat conduction allows for rapid freezing, preventing the accumulation of large ice crystals, thus maintaining a smooth texture even after long-term storage. The first Tetra Pak ice cream freezer was introduced in 1948, and some models are still in operation today. This truly demonstrates excellent quality and craftsmanship.

• 

  Mixer(8)

  Mixing is a common process in food processing, aimed at efficiently achieving smooth, uniform, and consistent quality products. Food processing manufacturers and consumers always seek perfect products. To achieve this, food processing manufacturers need to have complete control over every aspect of production from start to finish. Mixing is a highly complex process that takes place in the early stages of food production. Therefore, it is important for food processing manufacturers to adopt appropriate mixing solutions at the initial stage, ensuring that they can fully and reliably control the many factors that determine mixing efficiency and the quality of the final product.

• 

  Homogenizer(8)

  Homogenizer Tetra Alex enables efficient high-pressure homogenization of emulsions and suspensions. It can also be utilized as a high-pressure pump.

• 

  Centrifuge(15)

  Tetra Pak provides separation solutions that meet our customers' high demands for food quality and safety. Tetra Pak's separators combine high performance, cost efficiency, and low environmental impact.

• 

  Heat exchanger(24)

  There are "plate heat exchangers" and "tube heat exchangers" for the purpose of heating and sterilizing milk. Currently, plate heat exchangers are the majority, but recently, tube heat exchangers have been gaining attention for their maintenance and safety aspects. The "tube heat exchanger" allows milk to flow through stainless steel tubes while hot water flows around them for heating and sterilization. After that, cold water is circulated to cool it down. For delicate foods like milk, this indirect heating method of sterilization helps prevent the loss of flavor and nutrients.

• 

  Centrifugal pump(11)

  LKH pumps are high-efficiency and economical centrifugal pumps that combine sanitary properties, smooth liquid transfer, and chemical resistance.

• 

  Filtration equipment(1)

  This is an introduction to filtration equipment.

• 

  Liquid ring pump (self-priming pump)(1)

  The MR is a liquid ring pump specially designed to transport liquids containing air or gas. This pump is used in industries such as food, chemicals, and pharmaceuticals. It is ideal for CIP return.

• 

  Rotary pump(5)

  Tetra Pak's rotary lobe pump is designed for a wide range of applications in the brewing, dairy, food, pharmaceutical, and chemical industries. The SRU pump can handle fluids from low to high viscosity, and its smooth, low-shear pump operation characteristics make it ideal for products such as creams, gels, emulsions (milk emulsions), aerated mixtures, and suspensions of fine cells or organic solids.

• 

  Tank cleaning device(27)

  Toftejorg SaniMidget has high efficiency, replacing traditional low-pressure, low-flow fixed spray balls. It is particularly suitable for sanitary applications and can be used in tanks with capacities ranging from 0.1 to 10m3 (27 to 2,700 US gallons).

• 

  Butterfly valve(3)

  The LKB is a butterfly valve suitable for stainless steel sanitary piping, available in both manual and automatic operation specifications. The LKB has a remote control specification using an actuator and a manual operation specification using a handle. There are three types of actuators available: normally closed (NC), normally open (NO), and air-operated for both opening and closing.

• 

  Single seat valve(14)

  This is a new generation valve that meets the most stringent conditions in terms of hygiene and safety. The Unique single-seat valve is built on a proven modular platform selected from over one million installed valves.

• 

  Mix proof valve(4)

  The unique concept of the mix-proof valve is its unparalleled flexibility - however, it has not been realized. A reliable modular design creates a valve that precisely meets customer needs by handling applications with a single valve while preventing the mixing of two different liquids. Unique fits your process.

• 

  Adjustment valve(2)

  The adjustment valve is suitable for sanitary process applications that require precise control of flow rate or pressure. It is designed for a wide range of applications in measurement, mixing, weighing, and filling systems. The on-off valve consists of two or three ports and is suitable for applications in industries such as dairy, beverages, brewing, food, pharmaceuticals, biotechnology, and personal care.

• 

  Instrumentation equipment for valves(4)

  ThinkTop provides optimal valve control by being mounted on Alfa Laval's sanitary valves and connected to a general-purpose PLC system (programmable logic controller equipped with PNP/NPN interface). This top unit is suitable for use in machinery for food, dairy, and brewing products, as well as for biopharmaceutical applications.

• 

  Aseptic diaphragm valve(2)

  Our aseptic diaphragm valve system is based on a weir-shaped diaphragm valve backed by extensive performance records, consisting of various diaphragms and actuators, along with associated instrumentation units. The modular design of the aseptic diaphragm valve allows for nearly all necessary combinations to be realized. The valve is composed of the following components: - Actuator – manual or air-driven - Diaphragm – various soft and hard elastomers can be specified. - Valve body – The standard type is 2-way, but other configurations such as T valves and tank outlet valves can also be specified. The body can be provided to match tube fittings and surface finishes. Almost all configurations can be accommodated with combinations of these three types of components. The most common combinations are offered as standard products, while other combinations are available as options.

• 

  Warm water dispenser(1)

  Compact hot water production unit. The Spilax EasiHeat is an extremely compact heat exchange solution. Its heat exchanger volume is only 1.2m³, which is smaller compared to conventional shell-and-tube heat exchangers, and even the maximum output unit that incorporates all options has a compact design of just 4.6m³. EasiHeat offers higher heat transfer efficiency than shell-and-tube heat exchangers, allowing for reductions not only in fuel costs but also in CO2 emissions. EasiHeat is the ideal solution for various high-temperature water applications in air conditioning systems and processes, with capacities of up to 1500kW.

• 

  After service(2)

  Tetra Pak services address every aspect of your food production, from daily operations to business insights. With tailored solutions, we contribute to performance improvement across the entire operation lifecycle, cost optimization, and ensuring food safety. As a business partner, Tetra Pak provides the talent and portfolio necessary to help you achieve your goals. - Tetra Pak Maintenance Services: Preventive maintenance for reliable operation - Tetra Pak Parts: High-quality parts and services for stable operation - Tetra Pak Consumables: Optimization of your daily operations - Tetra Pak Upgrades: Enhancement of equipment capabilities and functionality - Tetra Pak Plant Components: Choices of high quality and reliability - Tetra Pak Training Services: Capability development to strengthen your business - Tetra Pak Automation Services: Control of operations by the customer - Tetra Pak Installation Services: Fast and reliable startup - Tetra Pak Expert Services: Insights to improve your entire plant

製品・サービス一覧 (141)