Compact, space-saving, and energy-efficient! High-performance ultra-high-temperature experimental furnace for R&D. A compact experimental furnace capable of heating small samples up to 2900°C for R&D purposes. It can be used for various sintering experiments, including ultra-high-temperature heating experiments and new material development in the laboratory. ◆ Main Features ◆ - Space-saving - Includes rotary pump and compressor - Interlock: water cut-off alarm, overheating, gas pressure drop ◆ Basic Specifications ◆ - Power supply specifications: AC200V 75A NFB 50/60HZ (C-500) - Max 2900°C (carbon furnace), 2400°C (metal furnace) - Programmable temperature controller, C thermocouple ◆ Options ◆ - Recorder - Turbo molecular pump - Crucible ◆ Main Applications ◆ - New material development - Fuel cells - Others

Ideal for organic thin film deposition applications such as OLED, OPV, and OTFT. Utilizes low-temperature organic deposition sources with excellent temperature responsiveness/stability and high-temperature deposition sources for metal films. A fully automated R&D vacuum deposition system with easy touch panel operation, excellent operability, and maintainability. An intuitive HMI that allows anyone to operate without complicated procedures. Connects to a PC via USB cable for log saving and creating and storing automatic deposition recipes. ◉ Compact size: 804(W) x 530(D) x 600(H)mm ◉ Weight: 40kg to 70kg (depending on equipment configuration) ◉ Excellent basic performance - Achievable vacuum level: 5x10-5 Pascal - Equipped with a high-performance turbo molecular pump - Φ2 inch or Φ4 inch substrates ◉ Deposition sources - Resistance heating deposition source TE x up to 2 units - Organic deposition source LTE x up to 4 units (if mixed with resistance heating TE, up to 2 units) ◉ 7" touch panel ◉ Continuous deposition - Automatic control of deposition programs - 30 types of registered recipes - High-precision wide-range vacuum gauge ◉ Abundant options - Substrate rotation - Up and down lift with 300mm stroke - Substrate shutter - Dry pump (RP standard)

We have completely renewed the catalog for the MiniLab series thin film experimental equipment. 【Features of the MiniLab Series】 ◉ Supports sputtering, evaporation (resistive heating, organic, EB), annealing, plasma etching, etc. ◉ Modular design allows for flexible combinations of components (source hybrid types and multi-chamber configurations are possible) ◉ Compact, space-saving design (width 1,200 x depth 560 mm) ◉ Excellent operability: intuitive interface allows for centralized management of all operations via a touch panel without dispersion. We are confident that this will be of great assistance in research and development settings. Please consider it.

Tabletop Small-Size Experimental Furnace - Space-Saving, Maximum Operating Temperature 2000℃ ◆ Equipment Configuration ◆ We will propose the desired configuration according to your budget and purpose. (A) Minimum Configuration: Chamber + Temperature Control Unit (B) Above Minimum Configuration (A) + Vacuum Exhaust System (Pump, Gauge, Valve, Vacuum Piping) ◉ Cylindrical Heater: For sample sintering inside the crucible (for solid, powder, granular, and pellet-shaped samples) ◉ Flat Heater: For sintering Φ1" to Φ6" wafers and small chip samples ◆ Basic Specifications ◆ - Heater: C/C Composite (Carbon Furnace), Tungsten (Metal Furnace) - Insulation Material: Graphite Felt, Tungsten/Molybdenum - Temperature Control: Programmable Temperature Controller, C Thermocouple - Achievable Vacuum Level: 1x10-2 Pascal (*for empty furnace) - Power Supply Specifications: AC200V 50/60HZ Three-Phase 6KVA - Cooling Water: 3L/min, 0.4Mpa 25-30℃ ◆ Control Box Specifications ◆ - Programmable Temperature Controller - DC Power Supply Unit or External Transformer Box - Current and Voltage Meters - Heater Circuit Trip Switch - Main Power Switch ◆ Options ◆ - Vacuum Exhaust System - Custom Crucibles and Others

High-Temperature Annealing Equipment for Max 2000℃ Φ6 to 8 inch Wafers, Capable of Small-Scale Production with Multi-Atmosphere Wafer Annealing System ◾️ Max 2000℃ ◾️ Effective Heating Range: Φ6 to Φ8 inch single wafer type or batch type (multi-layer 5 wafer cassette) ◾️ Heater Control: 1 zone or 2 zones (cascade control) ◾️ Heater Material: ・C/C Composite: Φ6 to Φ8 inch ・PG Coating High Purity Graphite: Φ6 to Φ8 inch ◾️ Operating Atmosphere: ・Vacuum (1x10-2Pa), Inert Gas (Ar, N2) ◾️ PLC Semi-Automatic Operation ・Automatic sequence control for vacuum/purge cycle and venting ・Full automatic operation (optional) ・Touch panel operation allows centralized management without dispersed control. ◾️ Process Pressure Control ・APC Control (MFC flow or automatic opening adjustment valve PID loop control) ・Maximum 3 systems of MFC flow automatic control or manual adjustment with flow meter/needle valve ◾️ PLOT screen graph display, CSV data output

◉ Maximum operating temperature Max 2000℃ ◉ PLC semi-automatic control A higher model of the tabletop Mini-BENCH with semi-automatic control Automatically controls each process of "vacuum/purge cycle," "gas replacement," and "venting" Maximum operating temperature 2000℃ Semi-automatic control ultra-high temperature experimental furnace (carbon furnace, tungsten metal furnace) Compact and space-saving experimental furnace ◉ Effective heating range (crucible dimensions) - Planar heater heating range: Φ2 inch to Φ6 inch - Cylindrical heater heating range: Φ30 to Φ80 x Depth Max 100(H) mm ◉ Up to 3 MFC systems for automatic flow control (or manual adjustment) ◉ APC automatic pressure control ◉ Ensures safety during operation Monitors abnormal cooling water, chamber temperature, and overpressure. Made of SUS, the robust water-cooled chamber can be safely used even during continuous operation at maximum temperature. ◉ Compact and space-saving Width 603 x Depth 603 x Height 1,160 mm (*Installed inside rotary pump housing) Various sample heating experiments, such as ultra-high temperature heating of small samples and new material research and development, can be easily performed with simple operations. The main unit is compact yet can be used for research and development in various fields.

Compact and space-saving! Ideal for organic thin film development, all processes such as deposition, sputtering, and annealing can be seamlessly performed within a glove box. In the development processes of organic EL, organic thin film solar cells, and graphene/2D materials (two-dimensional layered inorganic nanomaterials such as transition metal dichalcogenides), it is necessary to handle samples in an inert gas atmosphere isolated from oxygen and moisture. By housing the PVD chamber within the glove box, a compact and space-saving "oxygen and moisture-free" experimental environment for organic film applications is achieved. 【Features】 ◉ A series of processes such as PVD film deposition, spin coating, and hot plate baking can be performed seamlessly within the glove box without exposing them to the outside air. ◉ Space-saving: The chamber does not protrude from the back, so it does not take up space. 【MiniLab Models】 ◉ MiniLab-026 (26ℓ volume): Metal/insulator/organic material deposition, sputtering, RF/DC etching, annealing ◉ MiniLab-090 (90ℓ volume): Metal/insulator/organic material deposition, sputtering, RF/DC etching, annealing

4 cathodes with Φ2 inch configuration Simultaneous film deposition: 3-component simultaneous deposition (RF 500W or DC 850W) + HiPIMS (PulseDC 5KW) x 1 Power distribution and configuration settings for 4 cathodes can be freely changed via the HMI screen using the plasma relay switch 3 MFC systems (Ar, O2, N2) for reactive sputtering RIE etching stage RF 300W (main chamber) + <30W soft etching (LL chamber) Substrate heating: Max 500℃, 800℃, or 1000℃ (C/C or SiC coating) Substrate rotation and vertical movement (automatically controlled by stepping motor) APC automatic control: Upstream (MFC flow adjustment) or downstream (automatic valve opening adjustment on the exhaust side) Dimensions: 1,120(W) x 800(D) ● Mixed specifications for resistance heating deposition, organic material deposition, EB deposition, PECVD, etc. are also possible.

Multifunctional Multi-Sputtering Device (Compatible with Φ8inch Substrates) - Simultaneous deposition of three components + one component Pulse DC sputtering - Flexible arrangement of RF500W and DC850W power supplies to three cathodes (Source 1, 2, 3) - Equipped with a 5KW Pulse DC power supply → used with dedicated cathode (4) - Substrate heating stage Max 800℃ (SiC coated heater can achieve Max 1000℃) - MFC x 3 systems (Ar, O2, N2) for reactive sputtering - Main chamber RIE etching stage RF300W - LL chamber <30W low power controlled soft etching - Unique "Soft-Etching" technology reduces substrate damage through substrate bias - Touch panel or Windows PC operation: All operations can be performed on the touch panel/PC without dispersing control. - Equipment installation dimensions: 1,960(W) x 1,100(D) x 1,700(H) mm - Multi-chamber type can also be manufactured. ● Mixed specifications for resistance heating deposition, organic material deposition, EB deposition, PECVD, etc. are also possible.

Two thin-film experimental devices are connected via a load lock mechanism. Different film deposition devices (sputtering - evaporation, etc.) are seamlessly connected through the load lock. With Moorfield's unique load lock system, connections to the left, right, and rear process chambers are also possible (see photo below). 1. MiniLab-E080A (Evaporation Device) - EB Evaporation: 7cc crucible x 6 - Resistance Heating Evaporation x 2 - Organic Evaporation Limit x 2 2. MiniLab-S060A (Sputtering Device) - Φ2" Magnetron Cathode x 4 sources for simultaneous sputtering - Compatible with both DC and RF power supplies 3. Load Lock Chamber - Plasma Etching Stage In the load lock chamber, plasma cleaning of the substrate surface is performed using the "RF/DC substrate bias stage," and the company's unique 'soft etching' technology allows for a <30W low-power, damage-free plasma etching stage. This enables delicate etching processes that are prone to damage, such as 2D (removal of resists like PMMA), graphene delamination, and etching of Teflon substrates. (*This can also be installed in the main chamber stage.)

The MiniLab thin film experimental device allows for the construction of a compact, semi-customized system that eliminates waste by incorporating the optimal components and control modules according to the required film formation methods and materials from a wide range of options. By equipping a modular control unit with a Plug & Play feel, the application range expands, enabling various thin film process experiments. 【MiniLab Thin Film Experimental Device Configuration Modules】 ◎ Manufacturing Range Resistance heating deposition (TE), organic deposition (LTE), electron beam deposition (EB), sputtering (SP), CVD, dry etching 【Small Footprint & Space Saving】 - Single rack type (026): 590(W) x 590(D)mm - Dual rack type (060): 1200(W) x 590(D)mm - Triple rack type (125): 1770(W) x 755(D)mm 【Excellent Operability & Intuitive Operation Screen】 Windows PC or 7” touch panel. Easy operation that does not require advanced skills, with maximum consideration for safety. All operations except for internal component adjustments and material exchanges in the chamber are performed via the PC/HMI screen.

Max 1000℃, MFC up to 3 systems, APC pressure control, compatible with substrates from 4" to a maximum of 6", high vacuum annealing device (<5 × 10-7 mbar) [ANNEAL] is a research and development annealing device capable of high-temperature heat treatment of substrates such as wafers in a stable process atmosphere. It allows high-temperature processing up to 1000℃ using a heating stage installed in a high vacuum water-cooled SUS chamber. A heat shield is installed inside the chamber to ensure safety through interlock. The mass flow controller can be expanded to a maximum of 3 systems, enabling firing operations with precisely adjusted process gas pressure (APC automatic process control system option). Additionally, there are many options available, including a front view port, dry scroll pump, special substrate holder, and additional thermocouples. The heating stage inside the chamber has three variations depending on the process gas atmosphere and treatment temperature: - Halogen lamp heater: Max 500℃ - C/C composite heater: Max 1000℃ (in vacuum, inert gas only) - SiC coating heater: Max 1000℃ (vacuum, inert gas, O2)

◉ High-efficiency and high-precision process control using cold wall method ◉ Rapid heating: 1100℃ in approximately 3 minutes ◉ High-precision temperature control: ±1℃ ◉ High-precision APC automatic pressure control system: 3 gas lines (Ar, H2, CH4) ◉ Standard recipe for graphene production included ◉ Compact size: 405(W) x 415(D) x 280(H) mm ◆Features◆ - Easy operation! Operation and recipe management via 5-inch touch panel - Up to 30 recipes and 30-step program creation possible - PC software included for USB cable connection, offline recipe creation on PC → upload/download to device, CSV data output - Maximum sample size: 40 x 40 mm: Copper (nickel) foil, SiO2/Si, Al2O3/Si substrates, etc. ◆Model: nanoCVD-8G◆ - Standard program for graphene included - High vacuum process, high-precision process pressure control - Rotary pump included as standard - 3 gas supply lines (Ar, H2, CH4) - Sample heating stage (high-purity graphite) Max 1100℃ - K-type thermocouple

Plasma CVD equipment compatible with wafer sizes Φ3 inch and Φ4 inch. Rapid synthesis of clean, high-quality graphene while suppressing impurities. Usable with both thermal CVD and low to high temperature plasma CVD methods. The configuration can be customized according to requirements, including mass flow gas supply systems and substrate heating heaters. 【Example of equipment configuration】 - Substrate: Cu, Ni, etc. (film, foil) - Raw materials: CH4, C2H4, solids (PMMA), etc. - Process gases: H2, Ar, N2, etc. - Substrate size: Φ4 inch - 150W, 13.56MHz RF power supply - Substrate heating from 500℃ to Max 1100℃ - High precision process gas pressure APC control - Mass flow controller with a maximum of 4 channels

High-efficiency magnetron sputtering cathode compatible with RF, DC, and pulse DC, capable of depositing metals and insulators without impurities. It also excels in maintainability. 【Features】 - High vacuum compatible - Available in sizes Φ2 inch, Φ3 inch, Φ4 inch - Adopts a clamp ring type, eliminating the need for bonding - Excellent maintainability, allowing for easy target replacement - Rich options including shutters, chimney ports, gas injection, high-strength magnets for magnetic materials, etc. - Compatible with various flange sizes 【Main Specifications】 ■ Compatible with RF, DC, and pulse DC ■ Target thickness: 1/16" to 1/4" ■ N-type coaxial connector ■ Water-cooled: 4ℓ/min, 0.35Mpa Φ6mm tube connection ■ Case material: SUS304 ■ Target clamp material: Al or SUS304 ■ Bellows (*Flexi-head type) material: SUS316 ■ Insulating material: PEEK/PTFE ■ Sealing material: Viton ■ High-strength magnet pack: NiFe

ThermoCera Japan has updated the latest catalog for substrate heating heaters, ideal for thin film experiments such as CVD and PVD, with ultra-high temperature substrate heating heaters ranging from 1 inch to 4 inches. ◉ Maximum operating temperature: 850°C (SH-IN), 1100°C (SH-BN) We also accommodate requests for customized products such as substrate holders, vertical lift mechanisms, substrate rotation mechanisms, and RF bias. Additionally, we offer 19-inch rack-mounted heater controllers in addition to traditional stationary models.

It can be applied to various vacuum thin film experiments such as PVD (sputtering, evaporation, EB, etc.), CVD, high-temperature vacuum annealing, and high-temperature sample analysis substrate stages. We offer custom-made solutions to meet various specifications. 【Features】 ● Semi-custom product. Designed and manufactured according to your requests. ● Easy replacement of the auxiliary heater wire. ● Easy installation and maintenance (M6 stud bolts, supports). ● Compatible with RF/DC bias and substrate rotation. 【Standard Accessories】 ● Thermocouple: wire type with alumina insulating sleeve. ● Mounting stud bolts. 【Options】 ● RF (150W)/DC (1KW) bias application. ● Non-standard heater wires (Nb, Mo, Pt/Re, WRe, etc.). ● Substrate holding clips. ● Mounting brackets. ● Substrate holders. ● Tapped holes for holder installation. ● Change of top plate material (PBN, quartz, carbon, Inconel, etc.). ● Additional thermocouples for overheating. ● Base flange and vacuum feedthrough.

Compact and space-saving! Ideal for organic thin film development, allowing seamless execution of all processes such as deposition, sputtering, and annealing within a glove box. In the development processes of organic EL, organic thin film solar cells, and graphene/2D materials (such as transition metal dichalcogenides and other two-dimensional layered inorganic nanomaterials), it is necessary to handle samples in an inert gas atmosphere isolated from oxygen and moisture. By housing a PCD/CVD chamber within the glove box, we achieve a "oxygen and moisture-free" experimental environment for organic film applications in a compact and space-saving setup. 【Features】 ◉ A series of processes such as PVD film deposition, spin coating, and hot plate baking can be performed seamlessly within the glove box without exposure to the outside air. ◉ Space-saving: The chamber does not protrude from the back, so it does not take up space. 【MiniLab Models】 ◉ MiniLab-026 (26ℓ volume): Metal/insulator/organic material deposition, sputtering, RF/DC etching, annealing ◉ MiniLab-090 (90ℓ volume): Metal/insulator/organic material deposition, sputtering, RF/DC etching, annealing

High-efficiency magnetron sputtering cathode compatible with RF, DC, and pulse DC, capable of depositing metals, insulators, and other materials without impurities. It also excels in maintainability. 【Features】 - Compatible with high vacuum - Available in sizes Φ2 inch, Φ3 inch, Φ4 inch - Adopts a clamp ring type, eliminating the need for bonding - Excellent maintainability, allowing for easy target replacement - A wide range of options including shutters, chimney ports, gas injection, and high-strength magnets for magnetic materials - Compatible with various flange sizes 【Main Specifications】 ■ Compatible with RF, DC, and pulse DC ■ Target thickness: 1/16" to 1/4" ■ N-type coaxial connector ■ Water-cooled: 4ℓ/min, 0.35Mpa Φ6mm tube connection ■ Case material: SUS304 ■ Target clamp material: Al or SUS304 ■ Bellows (*Flexi-head type) material: SUS316 ■ Insulating material: PEEK/PTFE ■ Sealing material: Viton ■ High-strength magnet pack: NiFe

Endless possibility_thermal engineering There is an endless demand for "heat," which is indispensable in any era, and we aim to contribute, even in a small way, to the research and development needs. We would like to introduce the latest thermal engineering and temperature measurement technologies. Our company sells temperature measurement devices such as radiation temperature sensors, as well as heaters and experimental furnaces that support the semiconductor and electronic device development sector. - Ultra-high temperature substrate heating heaters for CVD and PVD vacuum thin film experiments - Ultra-high temperature small experimental furnaces - Thin film experimental devices for research and development - Compact series thin film experimental devices - Infrared radiation temperature sensors - Various vacuum components

The HTE heater is a high-temperature heating heater for vacuum devices with a maximum operating temperature of 1500°C. It can evaporate materials with high evaporation temperatures, making it suitable for a wide range of applications as a vacuum high-temperature heater and deposition cell, from low-temperature organic deposition (up to 800°C) cells to high-temperature resistance heating deposition (up to 1500°C) MBE cells. Shutter actuators and water-cooled jackets are also available. The high-temperature heater specification above 800°C is designed with internal shielding, considering insulation and thermal shielding. 【Main Specifications】 ■ Maximum control temperature: 800°C or 1500°C ■ Operating environment: In vacuum or inert gas (*O2 up to 800°C) ■ Heater: Tungsten filament ■ Crucible volume: 1cc (maximum filling amount 1.5cc) ■ Crucible material: Alumina ■ Case material: SUS304 or Molybdenum ■ Thermocouple: K or C 【Options】 ⚫ Crucible material: PBN, Graphite, Quartz ⚫ Heater: NiCr wire, Kanthal wire (*for O2) ⚫ Crucible volume: 10cc (maximum filling amount 15cc) ⚫ Shutter: Pneumatic or motor-driven ⚫ Water-cooled jacket ⚫ Controller (for heater and shutter control)

Vacuum Ultra-High-Temperature Cylindrical Heater Unit Maximum Temperature 1800℃ (Graphite, C/C Composite) We will manufacture according to your requested specifications. This is a cylindrical heating unit that can be applied in high vacuum for various purposes. Within the cylindrical heating range, we can custom-make for purposes such as heating crucibles containing samples, heating metal, ceramic, and wire-shaped samples, etc. ◎ Usable Environment: In vacuum, in inert gas, etc. ◎ Heating Element: Graphite, C/C composite heater, SiC coating, PG coating, tungsten, tantalum, etc. ◎ Manufacturing Range: Heater section (up to approximately Φ150 x 100mm), introduction flange, temperature control unit ◎ Applications: Sample heating in various vacuum device process chambers, discharge plasma generation unit thermal electron gun (Lab6), rapid heating of gas supply system piping (liquid rapid vaporization) We also offer custom specifications according to other requests. For details, please contact us.

We have released dedicated remote management software "IntelliLink" for the nanoPVD-S10A magnetron sputtering system, the nanoPVD-T15A metal/organic film deposition system, and the nanoPVD-ST15A composite thin film experimental system. In addition to the control software "IntelliDep," which allows centralized management of equipment operation and film formation control via the included 7" touch panel, the new optional IntelliLink enables remote management from a Windows PC. With IntelliLink, almost all operations, except for the main controls of the equipment (vacuum pumping, vent operation, interlock monitoring), can be performed from the PC. (1) System live monitoring (equipment operation status monitor) - Chamber pressure, MFC flow rate settings - Film thickness display, settings, calibration - Stage rotation, heating, shutter opening and closing operations (2) Error analysis (3) Recipe creation, saving, uploading (4) Data logging, CSV format output → Data sharing with other devices ◉ Connect to the equipment's rear Ethernet port using the included USB cable.

ThermoCera Japan has updated the latest catalog for its ultra-high temperature substrate heating heaters, suitable for thin film experiments such as CVD and PVD, ranging from 1 inch to 4 inches. ◉ Maximum operating temperature: 850°C (SH-IN), 1100°C (SH-BN) We also accommodate requests for customized products such as substrate holders, vertical lift mechanisms, substrate rotation mechanisms, and RF bias. Additionally, we offer heater controllers in both traditional standalone models and 19-inch rack mount options.

Max 2000℃ Φ6〜8 inch wafer dedicated high-temperature annealing device, capable of small-scale production multi-atmosphere wafer annealing device. ◾️ Max 2000℃ ◾️ Effective heating range: Φ6〜Φ8 inch single wafer type or batch type (multi-stage 5 wafer cassette) ◾️ Heater control: 1 zone or 2 zones (cascade control) ◾️ Heater materials: ・C/C composite: Φ6〜Φ8 inch ・PG coating high-purity graphite: Φ6〜Φ8 inch ◾️ Operating atmosphere: ・Vacuum (1x10-2Pa), inert gas (Ar, N2) ◾️ PLC semi-automatic operation ・Automatic sequence control for vacuum/purge cycle and venting ・Fully automatic operation (optional) ・Touch panel operation, allowing centralized management without dispersed operations. ◾️ Process pressure control ・APC control (MFC flow or automatic opening adjustment valve PID loop control) ・Maximum 3 systems of MFC flow automatic control, or manual adjustment of float meter/needle valve ◾️ PLOT screen graph display, CSV data output

◉ Maximum operating temperature Max 2000℃ ◉ PLC semi-auto control A higher model of the tabletop Mini-BENCH with semi-auto control Automatically controls each process of "vacuum/purge cycle," "gas replacement," and "venting" Maximum operating temperature 2000℃ Semi-auto control ultra-high temperature experimental furnace (carbon furnace, tungsten metal furnace) Compact and space-saving experimental furnace ◉ Effective heating range (crucible dimensions) - Flat heater heating range: Φ2 inch to Φ6 inch - Cylindrical heater heating range: Φ30 to Φ80 x Depth Max 100(H) mm ◉ Up to 3 MFC systems for automatic flow control (or manual adjustment) ◉ APC automatic pressure control ◉ Ensures safety during operation Monitors abnormal cooling water, chamber temperature, and overpressure. Made of SUS, robust water-cooled chamber can be safely used even during continuous operation at maximum temperature. ◉ Compact and space-saving Width 603 x Depth 603 x Height 1,160 mm (*Installed inside rotary pump housing) Ultra-high temperature heating experiments for small samples in the laboratory, as well as various sample heating experiments for new material research and development, can be easily conducted with simple operations. The main unit is compact yet can be used for research and development in various fields.

Tabletop Small-Size Experimental Furnace - Space-Saving, Maximum Operating Temperature 2000℃ ◆ Equipment Configuration ◆ We will propose the desired configuration according to your budget and purpose. (A) Minimum Configuration: Chamber + Temperature Control Unit (B) Above Minimum Configuration (A) + Vacuum Exhaust System (Pump, Gauge, Valve, Vacuum Piping) ◉ Cylindrical Heater: For sintering samples in crucibles (for solid, powder, granule, and pellet-shaped samples) ◉ Flat Heater: For sintering Φ1" to Φ6" wafers and small chip samples ◆ Basic Specifications ◆ - Heater: C/C Composite (Carbon Furnace), Tungsten (Metal Furnace) - Insulation Material: Graphite Felt, Tungsten/Molybdenum - Temperature Control: Programmable Temperature Controller, C Thermocouple - Achievable Vacuum Level: 1x10-2 Pascal (*for an empty furnace) - Power Supply Specifications: AC200V 50/60HZ Three-Phase 6KVA - Cooling Water: 3L/min, 0.4Mpa 25-30℃ ◆ Control Box Specifications ◆ - Programmable Temperature Controller - DC Power Supply Unit or External Transformer Box - Current and Voltage Meters - Heater Circuit Trip Switch - Main Power Switch ◆ Options ◆ - Vacuum Exhaust System - Custom Crucibles and Others

Equipped with various conditions necessary to create a highly uniform "high-quality" thin film required in research and development settings. The nano series is a high-performance device that condenses functionality into a compact body. It employs a robust and highly airtight stainless steel chamber that ensures a high vacuum environment and sufficient T/S adjustment distance, which are essential elements for high-quality film formation with minimal defects. Additionally, all models share the IntelliDep software, which allows anyone to operate the system regardless of their level of expertise, thanks to its intuitive and easy-to-understand touch panel interface. 【nano Benchtop Compact Thin Film Experimental Equipment】 ◉ nanoPVD-S10A: RF/DC Magnetron Sputtering Device ◉ nanoPVD-T15A: Organic Film and Metal Film Deposition Device ◉ nanoPVD-ST15A: Mixed Deposition and Sputtering Composite Thin Film Experimental Device ◉ ANNEAL: Wafer Annealing Device ◉ nanoCVD: Graphene/CNT Synthesis Device ◉ nanoEM: High Vacuum EM Coater * For other detailed specifications, please contact us.

Sputter Cathode and Co-evaporation Source Mixed Thin Film Experimental Device. Metal deposition, organic deposition, and sputter cathode are installed in a compact frame. A resistance heating evaporation source (for metal deposition), an organic evaporation source (for organic materials), and magnetron sputtering (for metals and insulating materials) are installed in the chamber, allowing for various thin film experimental setups within a single chamber. ◉ Three combinations available: 1. Sputter Cathode + Resistance Heating Evaporation Source x2 2. Sputter Cathode + Organic Evaporation Source x2 3. Sputter Cathode + Resistance Heating Source x1 + Organic Evaporation Source x1 (*DC sputtering only) 【Specifications】 ◉ Compatible substrates: up to Φ4 inches ◉ Sputtering: 2" cathode x up to 3 sources ◉ Vacuum deposition: Resistance heating evaporation (up to 2), organic evaporation (up to 4) ◉ 7" touch panel operation with PLC automatic process control ◉ APC automatic pressure control ◉ 1 line of Ar gas (standard) + expandable with N2, O2 ◉ Connects to a Windows PC via USB for recipe creation and storage. Data logging on PC ◉ Various other options available ◉ Easy operation with a 7" touch panel and PLC automatic process control

Max 1000℃, MFC up to 3 systems, APC pressure control, compatible with substrates from 4" to a maximum of 6", high vacuum annealing device (<5 × 10-7 mbar) [ANNEAL] is a research and development annealing device capable of high-temperature heat treatment of substrates such as wafers in a stable process atmosphere. It allows high-temperature processing up to 1000℃ using a heating stage installed in a high vacuum water-cooled SUS chamber. A heat shield is installed inside the chamber to ensure safety through interlock. The mass flow controller can be expanded to a maximum of 3 systems, enabling firing operations at precisely adjusted process gas pressures (APC automatic process control system option). Additionally, there are many options available, including a front view port, dry scroll pump, special substrate holder, and additional thermocouples. The heating stage inside the chamber has three variations depending on the process gas atmosphere and treatment temperature: - Halogen lamp heater: Max 500℃ - C/C composite heater: Max 1000℃ (in vacuum, inert gas only) - SiC coating heater: Max 1000℃ (vacuum, inert gas, O2)