ウェーブフロント 本社 Official site

"VizSpark," which makes it possible to analyze the erosion of spark plugs, which was previously difficult.

VizSpark not only considers the characteristics of arc plasma but also takes into account conjugate heat transfer and coupling with flow, making it possible to utilize it for a wide range of purposes. By using VizSpark, you can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma.

"VizSpark" makes it possible to analyze the wear of spark plugs, which was previously difficult.

VizSpark not only considers the characteristics of arc plasma but also takes into account conjugate heat transfer and coupling with flow, making it possible to utilize it for a wide range of purposes. By using VizSpark, you can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma.

"Particle-PLUS" is a plasma and rarefied fluid analysis software that specializes in magnetron sputtering devices using the particle method.

**Features** - The time scheme uses an implicit method, allowing for stable time evolution calculations over a large time step Δt compared to conventional methods. - The collision reaction model between neutral gas and electrons and ions employs the Monte Carlo Scattering method, enabling accurate and rapid calculations of complex reaction processes. - The neutral gas module determines the initial neutral gas distribution used in the plasma module above, allowing for quick evaluation of gas flow using the DSMC method. - The sputtered particle module calculates the behavior of atoms sputtered from the target in plasma and neutral gas environments in magnetron sputtering devices, enabling rapid evaluation of flux distribution on opposing substrates. *For other functions and details, please feel free to contact us.*

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

【Features】 ● The time scheme uses an implicit method, allowing for stable time evolution calculations over a large time step Δt compared to conventional methods. ● The collision reaction model between neutral gas and electrons and ions employs the Monte Carlo Scattering method, enabling accurate and rapid calculations of complex reaction processes. ● The neutral gas module determines the initial neutral gas distribution used in the plasma module above, allowing for quick evaluation of gas flow using the DSMC method. ● The sputtered particle module calculates the behavior of atoms sputtered from the target in plasma and neutral gas environments in magnetron sputtering devices, enabling rapid evaluation of flux distribution on opposing substrates. *For other functions and details, please feel free to contact us.

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

**Features** - The time scheme uses the implicit method, allowing for stable time evolution calculations over a large time step Δt compared to conventional methods. - The collision reaction model between neutral gas and electrons and ions employs the Monte Carlo Scattering method, enabling accurate and rapid calculations of complex reaction processes. - The neutral gas module determines the initial neutral gas distribution used in the above plasma module, allowing for quick evaluation of gas flow using the DSMC method. - The sputtered particle module calculates the behavior of atoms sputtered from the target in plasma and neutral gas environments, such as the flux distribution on the opposing substrate, which can be evaluated in a short time. - For other functions and details, please refer to the catalog.

This is simulation software that makes it possible to analyze the arc plasma of automotive spark plugs, which was previously difficult.

VizSpark not only considers the characteristics of arc plasma but also takes into account conjugate heat transfer and coupling with flow, making it possible to utilize it for a wide range of purposes. By using VizSpark, you can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma.

This is simulation software that makes it possible to analyze arc plasma in automotive spark plugs, which was previously difficult.

VizSpark not only considers the characteristics of arc plasma but also takes into account conjugate heat transfer and coupling with flow, making it possible to utilize it for a wide range of purposes. By using VizSpark, you can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma.

The world's only software dedicated to analyzing arc discharge! Strong in analyzing spark plugs and circuit breakers!!

VizSpark not only considers the characteristics of arc plasma but also takes into account conjugate heat transfer and coupling with flow, making it possible to utilize it for a wide range of purposes. By using VizSpark, you can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma.

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

**Features** - The time scheme uses the implicit method, allowing for stable time evolution calculations over a large time step Δt compared to conventional methods. - The collision reaction model between neutral gas and electrons and ions employs the Monte-Carlo Scattering method, enabling accurate and rapid calculations of complex reaction processes. - The neutral gas module determines the initial neutral gas distribution used in the plasma module mentioned above, allowing for quick evaluation of gas flow using the DSMC method. - The sputtered particle module calculates the behavior of atoms sputtered from the target in plasma and neutral gas environments in magnetron sputtering devices, enabling quick evaluation of flux distribution on opposing substrates. - We not only sell software but also conduct commissioned analyses. *For other functions and details, please feel free to contact us at information@wavefront.co.jp.*

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

**Features** - The time scheme uses the implicit method, allowing for stable time evolution to be calculated over a large time step Δt compared to conventional methods. - The collision reaction model between neutral gas and electrons and ions employs the Monte Carlo Scattering method, enabling accurate and rapid calculations of complex reaction processes. - The neutral gas module determines the initial neutral gas distribution used in the above plasma module, allowing for quick evaluation of gas flow using the DSMC method. - The sputtered particle module calculates the behavior of atoms sputtered from the target in plasma and neutral gas in devices such as magnetron sputtering systems, enabling quick evaluation of flux distribution on opposing substrates. *For other functions and details, please feel free to contact us.*

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

**Features** - A simulation software for dilute fluid using the particle method, useful for experiments and device development using vacuum chambers. - Capable of simulating film formation that includes chemical reactions such as CVD. - Adopts unstructured meshes, allowing calculations to be performed using the actual shape of the device. - High parallel efficiency enables quick computation results even for large-scale shapes. - Unlike fluid models, the particle method guarantees convergence solutions even with poor quality computational grids. - With comprehensive technical support, even those new to simulation or busy with experiments can reliably achieve results. - For other functions and details, please contact us.

Analysis of gas flow under low pressure conditions; analysis software compatible with rarefied gases (rarefied fluids).

**Features** - A simulation software for rarefied fluid using the particle method, useful for experiments and equipment development using vacuum chambers. - Capable of simulating film deposition that includes chemical reactions such as CVD. - Adopts unstructured meshes, allowing calculations that directly reflect the actual shape of the equipment. - High parallel efficiency enables quick computation results even for large-scale shapes. - Unlike fluid models, the particle method ensures convergence to a solution even with poor quality computational grids. - Comprehensive technical support allows beginners in simulation and those busy with experiments to reliably obtain results. - For other features and details, please refer to the catalog.

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'

**Features** - A simulation software for dilute fluid using the particle method, useful for experiments and equipment development involving vacuum chambers. - Capable of simulating film deposition that includes chemical reactions such as CVD. - Adopts unstructured meshes, allowing for calculations that directly reflect the actual shape of the equipment. - High parallel efficiency enables quick computation results even for large-scale shapes. - Unlike fluid models, the particle method ensures convergence to a solution even with poor-quality computational grids. - Comprehensive technical support allows beginners in simulation and those busy with experiments to reliably achieve results. - For other functions and details, please contact us.

Analysis of gas flow under low pressure conditions; analysis software compatible with rarefied gases (rarefied fluids).

【Features】 ● A simulation software for dilute fluid using the particle method, useful for experiments and equipment development using vacuum chambers. ● Capable of simulating film deposition rates and distributions that include chemical reactions such as CVD. ● Adopts unstructured meshes, allowing calculations to be performed based on the actual shape of the equipment. ● High parallel efficiency enables quick computation results even for large-scale shapes. ● Since it uses the particle method, unlike fluid models, it can achieve convergent solutions even with poor quality computational grids. ● With comprehensive technical support, even those new to simulations or busy with experiments can reliably obtain results. ● For other features and details, please refer to the catalog.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers involving rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious tasks. (2) Fluid analysis of various gear pumps is possible! Simerics MP+ has a mesh creation function for various pumps, including different gear pumps, making it easy to perform calculations for a variety of pumps. It also has a mesh creation function for valves, allowing for calculations of flow paths that include valves, and coupled analysis is possible. (3) More accurate modeling of aeration/cavitation! It includes a high-precision cavitation model, enabling the prediction of non-condensable gas expansion and vapor generation due to cavitation. (4) Calculation of free surface flow It has become possible to analyze oil lifting within the gearbox and oil suction from the oil pan during pump startup.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers that involve rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious work. (2) Fluid analysis of various electric pumps is possible! Simerics MP+ has mesh creation capabilities for various pumps, including gear pumps, making it easy to perform calculations for different pumps. It also has mesh creation functionality for valves, allowing for calculations of flow paths that include valves, and coupled analysis is also possible. (3) More accurate modeling of aeration/cavitation! It includes a high-precision cavitation model, enabling the prediction of non-condensable gas expansion and vapor generation due to cavitation. (4) Calculation of free surface flow It is now possible to analyze oil lifting within the gearbox and oil suction from the oil pan during pump startup.

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers involving rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious work. (2) Fluid analysis of various gear pumps is possible! Simerics MP+ has mesh creation capabilities for various pumps, including different types of gear pumps, making it easy to perform calculations for a wide range of pumps. It also has mesh creation functionality for valves, allowing for calculations of flow paths that include valves, and coupled analysis is also possible. (3) More accurate modeling of aeration/cavitation! It includes a high-precision cavitation model, enabling the prediction of non-condensable gas expansion and vapor generation due to cavitation. (4) Calculation of free surface flow It is now possible to analyze oil scraping within the gearbox and oil suction from the oil pan during pump startup.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers involving rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious tasks. (2) Fluid analysis of various gear pumps is possible! Simerics MP+ has mesh creation capabilities for various pumps, including different gear pumps, making it easy to perform calculations for a variety of pumps. It also has a mesh creation function for valves, allowing for calculations of flow paths that include valves, and coupled analysis is also possible. (3) More accurate modeling of aeration/cavitation! It includes a high-precision cavitation model, making it possible to predict the expansion of non-condensable gases and the generation of vapor due to cavitation. (4) Calculation of free surface flow It has become possible to analyze the oil scooping within the gearbox and the oil suction from the oil pan during pump startup.

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers that involve rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious tasks. (2) Fluid analysis of various gear pumps is possible! Simerics MP+ has mesh creation capabilities for various pumps, including different types of gear pumps, making it easy to perform calculations for a wide range of pumps. It also has mesh creation functions for valves, allowing for calculations of flow paths that include valves, and coupled analysis is also possible. (3) More accurate modeling of aeration/cavitation! A high-precision cavitation model is included, enabling the prediction of non-condensable gas expansion and vapor generation due to cavitation. (4) Calculation of free surface flow It is now possible to analyze oil scraping within the gearbox and oil suction from the oil pan during pump startup.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

(1) Automatic generation of calculation meshes! Even for complex flow paths, automatic generation of calculation meshes is possible with simple button operations. Additionally, for pump chambers that involve rotation/volume changes, high-precision calculation meshes can be automatically generated using a dedicated mesh creation module. It is possible to automatically execute the movement/rotation/deformation of high-precision meshes without tedious tasks. (2) Fluid analysis of various gear pumps is possible! Simerics MP+ has mesh creation capabilities for various pumps, including different gear pumps, making it easy to perform calculations for a wide range of pumps. It also has a mesh creation function for valves, allowing for calculations of flow paths that include valves, and coupled analysis is also possible. (3) More accurate modeling of aeration/cavitation! It includes a high-precision cavitation model, making it possible to predict the expansion of non-condensable gases and the generation of vapor due to cavitation. (4) Calculation of free surface flow It is now possible to analyze the oil scraping inside the gearbox and the oil suction from the oil pan during pump startup.

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

【Physical Models】 ◎ Compressible/Incompressible ◎ Steady/Unsteady ◎ Internal/External Flow ◎ Heat Transfer ◎ Laminar/External Flow ◎ Particle Tracking ◎ Radiation ◎ Sliding Mesh ◎ Cavitation ◎ Free Surface ◎ Rigid Body Motion ◎ Multicomponent ◎ Parallel Computing * For more details, please refer to the materials. Feel free to contact us with any inquiries.

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

【Physical Models】 ◎ Compressible/Incompressible ◎ Steady/Unsteady ◎ Internal/External Flow ◎ Heat Transfer ◎ Laminar/External Flow ◎ Particle Tracking ◎ Radiation ◎ Sliding Mesh ◎ Cavitation ◎ Free Surface ◎ Rigid Body Motion ◎ Multicomponent ◎ Parallel Computing *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

【Physical Models】 ◎ Compressible/Incompressible ◎ Steady/Unsteady ◎ Internal/External Flow ◎ Heat Transfer ◎ Laminar/External Flow ◎ Particle Tracking ◎ Radiation ◎ Sliding Mesh ◎ Cavitation ◎ Free Surface ◎ Rigid Body Motion ◎ Multicomponent ◎ Parallel Computing * For more details, please refer to the materials. Feel free to contact us with any inquiries.