In engineering, transportation is considered a waste that does not produce anything. Streamlining transportation directly leads to increased productivity. At Yoshida SKT, we improve your transportation processes and equipment with our unique surface treatment technology, contributing to operational efficiency. Yoshida SKT's convex coating will assist you in transitioning to the new normal of transportation! Please check our product page.

We will introduce the main materials used for molds, as well as surface treatments and case studies that can solve molding troubles. "What is poor release?" It refers to the situation where the material does not separate well from the mold during product molding or processing, resulting in defects or scratches. Such defects can lower product quality and potentially increase costs. [How to improve poor release] For more details, please check the product page. On the product page, you can download PDF materials.

This article explains about fluoropolymer PTFE, which is an excellent low-friction lubricant, and coatings that provide superior sliding properties. ■ What is sliding property? Sliding property refers to the ease of sliding. To improve sliding properties, materials with low friction coefficients or lubricants are used. By reducing friction, a high-sliding state with excellent sliding properties can be achieved. We have published an article on coatings with excellent sliding properties. You can download the PDF materials on the product page. Please be sure to check the product page.

Stainless steel is resistant to rust and is used for various applications. Additionally, we will introduce surface treatments and coatings that can add characteristics to the stainless steel surface. ■ What is the surface of stainless steel? Among stainless steels, the surface of austenitic stainless steel (SUS304) is covered with a passive film, making it resistant to rust in normal environments while maintaining a beautiful luster. However, in specific environments, it may corrode, and when used as machine parts, characteristics such as slip resistance and wear resistance are required. 【Types of surface treatments and coatings for SUS304】 - Electrolytic polishing - Sandblasting / bead blasting - Plating - Teflon coating On the product page, we will introduce surface treatments that combine wear resistance, slip resistance, and non-stick properties. Please take a look.

Mold release residue refers to foreign substances that adhere to the surface of molded products when forming thermoplastic materials such as resins and rubber. To prevent mold release residue, it is necessary to prevent material residue on the mold. When appropriate material selection and molding conditions cannot resolve the issue of mold release residue, adopting surface treatments with excellent release properties is effective. On the product page, we will introduce examples of improvements in mold release residue through surface treatments. Please take a look.

We will introduce the main materials used for molds, as well as surface treatments and case studies that can solve molding troubles. 【Main Purposes of Mold Coating】 - To extend the lifespan of molds by improving the hardness of the mold surface. - To enhance the quality of molded products by ensuring a smooth flow of resin. - To prevent resin adhesion by providing non-stick properties. We have published an article on the types of mold coatings. You can download PDF materials from the product page. Please be sure to check the product page.

【Presentation of Materials】What is corrosion-resistant coating? This article explains the fluororesin used for corrosion-resistant lining. ■What is corrosion-resistant coating? It is a coating that can protect the substrate, mainly metal tanks and pipes, from chemicals. Corrosion resistance refers to the property of being less likely to undergo corrosion reactions or oxidation. By coating materials that excel in chemical resistance, corrosion resistance can be imparted to the substrate. We have published an article explaining the above coating. You can download the PDF materials on the product page. Please be sure to check the product page.

We will introduce the main materials used for molds, as well as surface treatments and case studies that can solve molding troubles. **Methods to Prevent Mold Galling** Surface Treatment: By properly treating the surface of the mold, the resin becomes less likely to stick to it. Improvement of Gate Design: By designing the gate with consideration for the fluidity of the resin and the balance of forces during withdrawal, mold galling can be prevented. Optimization of Molding Conditions: By optimizing molding conditions, the resin becomes less likely to stick to the mold. For example, it is important to appropriately set molding conditions such as molding temperature, injection speed, injection pressure, and holding pressure. Mold Maintenance: Proper maintenance can prevent the occurrence of galling. Cleaning the surface, correcting the gate and flash surfaces, and air blowing are effective measures. We have published an article on methods to prevent mold galling. You can download the PDF materials on the product page. Please be sure to check the product page.

We will introduce the main materials used for molds, as well as surface treatments and case studies that can solve molding troubles. Various materials are used for molds depending on their application. While selecting the appropriate material is essential, choosing the right surface treatment is also important for the lifespan of the mold and the quality of the product. We have published an article on surface treatments used for molds. You can download PDF materials on the product page. Please be sure to check the product page.

Processing is possible at room temperature! It protects components from acids and alkalis. "Serashield F" is a fluorine coating with excellent chemical resistance that can be processed at room temperature. We have published an article explaining the above coating. You can download the PDF materials on the product page. Please be sure to check the product page.

Coating technology "Bicoat" suitable for applications with mechanical loads "Bicoat" is a coating technology that achieves the ideal functions of "sliding property + release property + wear resistance" by combining inorganic material coating technology with inorganic material coating technology. It withstands harsh usage areas such as molds and parts made of resin/rubber, as well as chutes and guides in packaging machines, providing reliable release properties, sliding properties, and durability. Please be sure to check the product page.

We will provide a detailed explanation of coating technology and anti-corrosion coating materials that can be processed at room temperature. We would like to introduce the room temperature processing type anti-corrosion coating "Cerashield." An article explaining the above has been published. You can download the PDF materials on the product page. Please be sure to check the product page.

This article provides a detailed explanation of "Teflon / Fluororesin Coating," which falls under the category of resin coatings. ■ PTFE Coating It has the highest continuous use temperature of 260°C, and it excels not only in heat resistance but also in non-stick properties and low friction. ■ PFA Coating It has the same continuous use temperature of 260°C as PTFE. It has a low thermal melt viscosity and is used as an anti-corrosion coating and non-stick coating. ■ FEP Coating Its heat resistance is lower at 200°C compared to PTFE. It can achieve a smooth surface with few pinholes in the coating. An article explaining the above has been published. You can download PDF materials on the product page. Please check the product page.

■What is resin welding Resin welding is one method of joining resin using heat. ■What is resin welding ■Types and methods of welding ■Advantages and disadvantages of hot plate welding ■Surface treatment to prevent sticking and stringing on the hot plate We have published an article explaining the above. You can download PDF materials on the product page. Please be sure to check the product page.

Here are the types and characteristics of representative thermoplastic plastics. ■ Types and Characteristics of Thermoplastic Plastics - Polyethylene (PE) The most widely produced plastic, used in items such as shopping bags and food containers. - Polypropylene (PP) More heat-resistant than polyethylene, used in films and cases. - Polyvinyl Chloride (PVC) Flame-resistant and durable, used in pipes and electrical wire coatings. - Fluororesin (PTFE) Excellent heat resistance, non-stick properties, and low friction characteristics. An article explaining the above has been published on Yoshida SKT's blog. Please check the URL.

The adhesive strength is almost zero even with strong double-sided tape! We introduce a surface treatment that can maintain water repellency, oil repellency, and slip resistance even after solvent cleaning. ■Features It leads to improved efficiency and productivity in cutting operations. The release properties do not decrease even after cleaning with solvents, and the effects last a long time. Test results show overwhelmingly lower values compared to SUS304 and Teflon coatings. An article explaining the above has been published. You can download the PDF materials on the product page. Please be sure to check the product page.

What are the reasons for the excellent sliding properties of fluoropolymer? We will introduce the characteristics of fluoropolymer PTFE, focusing on its lubricating and low-friction properties. ■ Low friction and sliding properties of fluoropolymer (PTFE) ■ Reasons for the low friction coefficient of fluoropolymer PTFE ■ Solid lubrication through fluoropolymer coating We have published an article explaining the above. You can download PDF materials on the product page. Please be sure to check the product page.

■What "Non-Stick" Means in Fluoropolymer Non-stick refers to the property of being easy to release from or not adhering to strongly adhesive materials, or having a tendency to adhere less. You can download detailed materials explaining the non-stick properties of fluoropolymers. For more information, please check the product page.

Types and characteristics of representative fluororesins ■ Resin Name PTFE (Polytetrafluoroethylene) ■ Resin Name PFA (Perfluoroalkoxyalkane polymer) ■ Resin Name FEP (Perfluoroethylene-propylene copolymer) This will be explained. For more details, please check the product page.

I want to eliminate stringing that occurs on the heat plate during thermal welding of polyethylene containers. I want to reduce product defects caused by stringing without changing the takt time and decrease the work of replacing the heat plate. Here is an example that meets such requests! For more details, please check the product page.

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that achieves non-stick properties and high film hardness at elevated temperatures, comparable to standard fluoropolymer coatings. ■Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) *Based on internal testing ■Applications - Resin welding plates - Resin molding molds - Heater plates - Heat sealers For more details, please download the materials and check.

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that combines the non-stick properties equivalent to standard fluoropolymer coatings with high film hardness at elevated temperatures. ■ Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) * Based on internal testing ■ Applications - Resin welding plates - Resin molding molds - Heater plates - Heat sealers For more details, please download the materials and check.

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that achieves non-stick properties and high film hardness at elevated temperatures, comparable to standard fluoropolymer coatings. ■Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) *Based on internal testing ■Applications - Resin welding plates - Resin molding molds - Heater plates - Heat sealers For more details, please download the materials and check.

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that achieves non-stick properties equivalent to standard fluoropolymer coatings and high film hardness at elevated temperatures. ■ Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) * Based on internal testing ■ Applications - Resin welding plates - Resin molding molds - Heater plates - Heat sealers For more details, please download the materials and check.

The "Nano Process HP Series" can impart hydrophilicity through surface treatment of thin films, demonstrating effectiveness in anti-fogging and anti-soiling. The "Nano Process HP Series" excels in hydrophilicity and contributes to anti-fogging, anti-soiling, moisture resistance, and rust prevention through thin film coating. If you are interested in more details or are facing challenges with coatings in precision fields, please download the materials or contact us directly.

Introducing an ultra-thin film coating with excellent liquid repellency for water and oil. The "Nano Process NCFPC Series" is an ultra-thin fluoropolymer coating that excels in liquid repellency for water, oil, and other liquids compared to traditional fluoropolymer coatings, improving liquid drainage and flow. If you are interested in more details or are facing coating challenges in precision fields, please download the materials or contact us directly.

A thin film coating with excellent non-stick properties that prevents adhesives from sticking. It helps to prevent adhesion on blades. The "Nano Process TLS Series" is a thin film coating that excels in non-stick properties, preventing adhesives like tape from sticking. If you are interested in more details or are facing challenges with coatings in precision fields, please download the materials or contact us directly.

The thin film coating "Nano Process TC-10S" enables nano-coating with ultra-thin film surface treatment technology of less than 100μm, excelling in precision, visible light transmittance, water repellency, and oil repellency. If you are interested in more details or are facing challenges with thin film coating in precision fields, please download the materials or contact us directly.

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic. "Urethane Coating CD9100" is a room temperature curing type coating that excels in wear resistance and soundproofing, and can be applied to any material except liquids and gases. For more details, please check the product site.

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic. "Urethane Coating CD9100" is a static-resistant type of urethane coating that excels in wear resistance and soundproofing, and can be processed on any material except liquids and gases. For more details, please check the product site.