MFC (Mass Flow Controller)
MFC (Mass Flow Controller)
■ Minimum flow rate: 20cc/min ■ Maximum flow rate: 2,500L/min ■ Minimum required differential pressure: 10KPa ■ Maximum operating differential pressure: 1.0MPa We boast a wide range of industrial mass flow products, from minimal flow rates to large flow rates, and from low differential pressures to high differential pressures. Additionally, the response time for changing the set point, until the flow stabilizes, is as short as 0.3 seconds, allowing for quick control to the desired flow rate. The reasons for this are: ● As a solenoid valve manufacturer, we choose products from a rich lineup of proportional solenoid valves tailored to your applications. ● Since the sensor uses a direct flow measurement method, there is no need to wait for heat transfer. ● We have established a control system with a unique algorithm that reliably controls high-performance valves and high-performance sensors. Please experience the completely different concept of the [MFC (Mass Flow Controller)] designed by a valve manufacturer, not a sensor manufacturer.
1～8 item / All 8 items
-
Coriolis MFC (Liquid Mass Flow Controller)
Burkert's Coriolis MFC measures and controls liquid flow rates from 10 to 280 g/min. It also has high accuracy as a flow meter.
last updated
-
Mass flow usable at a high differential pressure of 1.0 MPa and a low differential pressure of 10 kPa.
Mass flow controller (MFC) compatible with a wide range of operating pressures. It enables high-speed response within 0.3 seconds. It can also control large flow rates!
last updated
-
High-speed response MFC (Mass Flow Controller) that follows in 0.3 seconds.
High-speed response within 0.3 seconds! For devices with frequent changes in set flow rate! Wide pressure range support (0.01 to 1.0 MPa).
last updated
-
Achieving low cost is also possible! Mass flow controllers for the IoT era.
Control small to large flow rates with a single unit! Capable of handling micro to high differential pressures (10kPa to 1.0MPa)! A German-made MFC for the IoT era that also enables cost reduction.
last updated
-
Mass flow controller Type 874X compatible with CANopen.
In addition to the high-speed response performance and high range availability of conventional models, it also supports CANopen!
last updated
-
Mass flow controller with a large flow rate of 2,500L and high pressure of 1.0MPa.
High-flow, high-pressure mass flow controllers (MFC) that contribute to increasing the throughput of devices and processes.
last updated
-
Coriolis Mass Flow Controller Type 8756 High Precision Measurement Principle
The liquid MFC (mass flow controller) based on Burkert's Coriolis measurement principle can measure and control liquid flow rates from 10 to 280 g/min.
last updated
-
Liquid flow controller compatible with corrosive fluids, up to 600 ml/min.
For wide-range liquid flow controllers/flow meters, choose Bürkert.
last updated
