Surface and chemical analysis
Surface and chemical analysis
At Aites, we conduct surface, foreign matter, and contamination analysis.
61～90 item / All 127 items
-
[Information] We will solve the cause of the issue from a chemical perspective.
Solve the cause of the problem from a chemical perspective! Introducing methods to approach it through chemistry and reaction mechanisms.
last updated
-
Analysis of pigments and polymers using MALDI-TOFMS.
Detect the mass number as an absolute value! You can obtain information about the composition of the compound.
last updated
-
Structural analysis of Nylon 6.10
We will elucidate the characteristics at the molecular level using our FT-IR and thermal decomposition GC-MS!
last updated
-
[Example of TOF-SIMS] Analysis of Li
It is possible to detect with high sensitivity! We will introduce a case comparing the analysis of Li using TOF-SIMS and SEM-EDX.
last updated
-
Evaluation of distortion and birefringence of products/materials by WPA.
By evaluating the orientation, strain, and birefringence of the material, you can understand the internal stress and strain state!
last updated
-
FT-IR analysis of polyethylene
Analyze subtle spectral differences using FT-IR! We can also accommodate reliability tests combined with high temperature, cold heat, and more.
last updated
-
Characterization of materials using a ultra-micro hardness tester.
From the load-displacement curve of ultra-microhardness measurement, the characteristics of various materials become apparent!
last updated
-
Ion Chromatography Analysis Case (Solid Surface)
Suitable for relative comparison of flat samples such as printed circuit boards! Introducing the analysis flow of liquid samples and solid surfaces.
last updated
-
FT-IR analysis of ABS resin
Identifying substances through various approaches such as insights, spectral analysis capabilities, and other analytical methods.
last updated
-
Evaluation of distortion and birefringence in plastic molded products.
It is possible to visualize birefringent phase differences (distortion) and the flow direction/stress direction (principal axis orientation)!
last updated
-
Color evaluation of paint using a colorimeter.
It is possible to quantify the color of objects! We will introduce test results that quantify the differences in color.
last updated
-
[Document] Mass Spectrometry Guide
Analyze using information obtained from various analytical methods such as functional groups and skeletal structures! Introducing the mass spectrometry guide.
last updated
-
Liquid Crystal Material Analysis
Rich equipment and expertise! We will elucidate the molecular structures of materials in general through chemical instrument analysis!
last updated
-
[Data] Verification of overlap degree and molecular weight difference through IR analysis.
A reference peak was established in the ethylene section, focusing on the peaks involved in the ether bond!
last updated
-
Comparison Analysis of HDPE and LDPE
Analysis of material structure and material properties, as well as discussions on defects and degradation phenomena using various analytical methods.
last updated
-
Screening analysis of phthalate esters
The regulatory limit is 1000 ppm! You can easily check for the presence or absence of regulated compounds.
last updated
-
Quantitative analysis of low molecular weight siloxanes
Confirmation methods for low molecular weight siloxanes! It is also possible to analyze the amount of occurrence.
last updated
-
[Data] Analysis of Polycarbonate Degradation by Reaction Thermal Decomposition
For material evaluation and defect analysis! We will discuss the applied load and degradation mechanisms based on the differences in decomposition products.
last updated
-
[Data] Analysis of Additive Defects in Polymers Using Thermal Desorption GC-MS
It is possible to analyze with good sensitivity using thermal desorption GC-MS analysis! We propose methods tailored to the symptoms of issues and objectives.
last updated
-
Raman analysis of carbon materials
Measure the Raman spectrum! It is possible to obtain information about the structure and crystallinity of carbon materials.
last updated
-
[Example of TOF-SIMS] Wide-area image map
Wide-area image map driven by stage! Introducing a measurement example that visualizes the distribution of magic.
last updated
-
[Information] GC-MS Analysis Device Guide
Introducing the sample introduction device and the types of analytical samples and analysis content that each device specializes in!
last updated
-
[Data] Analysis and evaluation of organic materials and polymer materials.
Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.
last updated
-
[Data] Measurement of resin molecular weight by high-temperature GPC (SEC)
The analysis device also supports the analysis and evaluation of polymers! Information on the configuration and principles of high-temperature SEC equipment is provided!
last updated
-
[Data] GC-MS analysis by solvent extraction
I will introduce examples of comparing the components of color developers contained in thermal paper using solvent extraction!
last updated
-
[Data] Measurement of the birefringence of laminate film
Explaining the effects of combining PET and EVA! Introducing measurement results using laminated film.
last updated
-
Raman spectroscopy acquisition service for minerals in rocks
Assist in the study of rocks and minerals! Raman spectroscopy is very effective for identifying and analyzing mineral species in rocks.
last updated
-
Measurement examples of DSC (Differential Scanning Calorimetry)
Comparing thermal properties with DSC! We will discuss the impact of type identification and the state of polymer molecular chains on material properties!
last updated
-
Analysis of Liquid Crystal Display Materials
We propose analytical methods tailored to materials and purposes! Here are examples of chemical analysis for each component, such as liquid crystals and sealing materials.
last updated
-
Measurement of inorganic particle size using dynamic light scattering method.
Determine particle size and particle size distribution! Example of measuring the particle size of silica and alumina particles in an aqueous medium.
last updated