表面・化学分析
表面・化学分析
アイテスでは、表面・異物・汚染分析を行っております。
91～120 件を表示 ／ 全 129 件
-
Analysis of fragrance components by GC-MS.
GC-MS is used for qualitative and quantitative analysis of low molecular organic substances! Data was obtained and compared using incense and sandalwood!
最終更新日
-
Analysis of impurities in organic solvents
The aldol reaction progresses under the influence of temperature, humidity, and light! Example of impurity analysis in ethanol and acetone.
最終更新日
-
Analysis of film property changes due to UV irradiation.
Investigating how the light transmittance of blue light cut film changes using a spectrophotometer!
最終更新日
-
Analysis of trace metal elements in liquid crystals
Depending on the panel size, it is possible to analyze using different ICP-AES/MS devices!
最終更新日
-
Solder Heat Resistance Test (SMD)
Reproducing temperature stress during transportation! Evaluating the presence or absence of delamination and cracks through heat treatment.
最終更新日
-
Measurement of the transformation temperature of shape memory alloys
When a substance undergoes a phase transition due to a temperature change, a change in thermal energy occurs.
最終更新日
-
Identification of natural components by GCMS
Focusing on sandalwood (Byakudan), which is used as a raw material for incense! Here is an example of component analysis using GC-MS.
最終更新日
-
The Relationship Between Materials and Heat: An Introduction to Thermal Analysis
It is also possible to estimate the relationship with molecular-level structures! Introducing the types of thermal analysis and the properties that can be understood.
最終更新日
-
Contribution to the SDGs: Comparative Analysis of Materials/Recycled Raw Materials
We assist in manufacturing and research and development with a focus on SDGs by conducting comparative analysis and evaluation of recycled materials and raw materials using multiple methods.
最終更新日
-
Dynamic viscoelastic measurement of polyurethane rubber.
It is also possible to create master curves in tensile, shear, and bending modes other than compression mode!
最終更新日
-
Foreign substance analysis and component analysis: Comparison of micro-Raman and FTIR.
Spectroscopic analysis is suitable for component analysis and qualitative analysis of foreign substances.
最終更新日
-
Composition analysis of raw materials for all-solid-state batteries.
The purity of the electrolyte greatly affects the performance of the battery! It suppresses the volatility of sulfur components and converts them into a form that can be detected by IC.
最終更新日
-
Comparison of Infrared Spectroscopy and Raman Spectroscopy
By conducting two analyses, it is possible to obtain more detailed and accurate results!
最終更新日
-
Analysis of mica sheet adhesive components using GC/MS.
It is possible to investigate components that cannot be identified by spectroscopy alone, as well as trace additives that cannot be detected!
最終更新日
-
Derivatization for GC/MS analysis
Proposals tailored to the purpose of analysis and the target object! GC/MS analysis of derivatized samples.
最終更新日
-
Tensile test
Testing service for plastic films using a universal testing machine (autograph) in a heated environment!
最終更新日
-
Dynamic SIMS
Suitable for analysis of glass, metal, ceramics, silicon, compound semiconductors, shallow implants, and more!
最終更新日
-
Evaluation of pore distribution in non-woven fabric sheets
Important analysis items for performance evaluation and quality control of functional materials! Evaluation of pore size and pore distribution of non-woven sheets and membrane materials.
最終更新日
-
Raman UV-curable resin
The Raman spectrum reflects the functional groups of organic compounds! The curing reaction can be estimated to some extent.
最終更新日
-
Chemical Analysis Trust Service
Sample 1, including comparison with Ref! Summarize and conduct candidate analytical methods.
最終更新日
-
Evaluation of particle size of positive electrode active material
Introducing examples of measurement cases for important management items in the production of lithium-ion batteries and all-solid-state batteries!
最終更新日
-
Strain measurement in thermal shock testing
Observing the behavior of strain in thermal shock testing! The test materials used are FR-1 and FR-4.
最終更新日
-
Micro FT-IR
This year, we are introducing new additions! We will introduce the features of the three basic measurement methods.
最終更新日
-
Micro FT-IR imaging measurement
It is possible to visualize the distribution of substances within the specified plane! Suitable for evaluating the diffusion state of substances, etc.
最終更新日
-
Measurement of moisture absorption distortion
We investigated the behavior of strain during moisture absorption and drying using a strain gauge!
最終更新日
-
Optical film light transmission characteristics
We provide consistent evaluation and analysis from material properties to the mechanisms of their functional expression!
最終更新日
-
Composition analysis of LIB cathode active materials by ICP luminescence analysis.
ICP emission analysis enables qualitative and quantitative analysis of approximately 70 elements, primarily metal elements!
最終更新日
-
Analysis of organic-inorganic composites using FT-IR and EDX.
Here is an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX!
最終更新日
-
Strain measurement of power module package resin.
Measuring the strain behavior of the sealing resin under thermal cycling using a strain gauge!
最終更新日
-
NMR analysis of liquid crystal compounds
Introducing the information obtained from NMR, using 1H NMR, 13C NMR, and DEPT measurements as examples!
最終更新日