All products and services
271~300 item / All 360 items
-

Cross-sectional hardness of aluminum welds (spot welding)
Cross-sectional observation and hardness measurement of the weld joint were conducted! It was found that the void in the center is a blowhole.
last updated
-

Analysis of fragrance components by GC-MS.
GC-MS is used for qualitative and quantitative analysis of low molecular organic substances! Data was obtained and compared using incense and sandalwood!
last updated
-

Analysis of impurities in organic solvents
The aldol reaction progresses under the influence of temperature, humidity, and light! Example of impurity analysis in ethanol and acetone.
last updated
-

Surface observation of IC chips implemented on LCD panels.
The observation target is an IC chip connected to the LCD panel using the COG mounting method! The circuit surface was clearly visible.
last updated
-

Reverse bias test of power devices (up to 2000V)
It is possible to set bad standards (current values)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.
last updated
-

Analysis of film property changes due to UV irradiation.
Investigating how the light transmittance of blue light cut film changes using a spectrophotometer!
last updated
-

Analysis of trace metal elements in liquid crystals
Depending on the panel size, it is possible to analyze using different ICP-AES/MS devices!
last updated
-

Analysis of defects in overseas manufactured displays.
Numerous achievements in defect analysis! Detailed analysis is possible, from confirming phenomena to hypothesizing the mechanisms of defect occurrence.
last updated
-

Solder Heat Resistance Test (SMD)
Reproducing temperature stress during transportation! Evaluating the presence or absence of delamination and cracks through heat treatment.
last updated
-

Spectral radiance and chromaticity evaluation of liquid crystal displays.
Measurable contrast ratio and color temperature! Quantitative evaluation of changes in optical properties.
last updated
-

Condensation cycle test
Implemented by a partner company! Forcibly inducing condensation on test samples to reproduce the condensation state.
last updated
-

Measurement of the transformation temperature of shape memory alloys
When a substance undergoes a phase transition due to a temperature change, a change in thermal energy occurs.
last updated
-

Identification of natural components by GCMS
Focusing on sandalwood (Byakudan), which is used as a raw material for incense! Here is an example of component analysis using GC-MS.
last updated
-

Examples of observing intermetallic compounds through etching treatment.
Observe the state of the compound from the direction of the back and the surface! We will consider and propose processing, pretreatment, observation methods, and combinations.
last updated
-

Accelerated Weathering Test <Xenon Weather Meter>
Automobiles, paints, construction, plastics, printed materials, textiles, etc.! They are adopted as tests in various fields.
last updated
-

Evaluation of brightness and color uniformity of liquid crystal displays
By using a two-dimensional color brightness meter for measurement, it is possible to evaluate unevenness and other factors!
last updated
-

The Relationship Between Materials and Heat: An Introduction to Thermal Analysis
It is also possible to estimate the relationship with molecular-level structures! Introducing the types of thermal analysis and the properties that can be understood.
last updated
-

Pressure Repeated Test
Send compressed air at the specified pressure and hold for a set time! Check for any leaks.
last updated
-

Continuous current test of multilayer ceramic capacitors
Support from the design and fabrication of test boards! An effective method for comparing the capabilities of multiple products.
last updated
-

Contribution to the SDGs: Comparative Analysis of Materials/Recycled Raw Materials
We assist in manufacturing and research and development with a focus on SDGs by conducting comparative analysis and evaluation of recycled materials and raw materials using multiple methods.
last updated
-

Dynamic viscoelastic measurement of polyurethane rubber.
It is also possible to create master curves in tensile, shear, and bending modes other than compression mode!
last updated
-

Foreign substance analysis and component analysis: Comparison of micro-Raman and FTIR.
Spectroscopic analysis is suitable for component analysis and qualitative analysis of foreign substances.
last updated
-

Analysis of good quality overseas manufactured LCD displays
If any issues arise, detailed analysis will also be provided! A simplified analysis for customers considering the introduction of overseas LCDs.
last updated
-

Composition analysis of raw materials for all-solid-state batteries.
The purity of the electrolyte greatly affects the performance of the battery! It suppresses the volatility of sulfur components and converts them into a form that can be detected by IC.
last updated
-

Comparison of Infrared Spectroscopy and Raman Spectroscopy
By conducting two analyses, it is possible to obtain more detailed and accurate results!
last updated
-

Analysis of mica sheet adhesive components using GC/MS.
It is possible to investigate components that cannot be identified by spectroscopy alone, as well as trace additives that cannot be detected!
last updated
-

Case study of failure analysis of oxide-based all-solid-state batteries.
It has high safety and can be used in various environments! Consistent analysis is possible.
last updated
-

Derivatization for GC/MS analysis
Proposals tailored to the purpose of analysis and the target object! GC/MS analysis of derivatized samples.
last updated
-

Tensile test
Testing service for plastic films using a universal testing machine (autograph) in a heated environment!
last updated
-

Dynamic SIMS
Suitable for analysis of glass, metal, ceramics, silicon, compound semiconductors, shallow implants, and more!
last updated