Material evaluation using a ultra-micro hardness tester.
Useful for long-term quality control! Ultra-microhardness measurement of materials such as metals, polymers, and ceramics.
Our "Ultra-Micro Hardness Measurement for Material Evaluation" allows for the ultra-micro hardness measurement of materials such as metals, polymers, plastics, and ceramics. Additionally, since hardness can be quantified, it is also useful for long-term quality control. The hardness is determined by directly reading the depth of the indentation while applying a load to the indenter. It is also possible to determine characteristic values related to recovery behavior. 【Device Overview】 ■ Test force range: 0.4mN to 1000mN, Accuracy: ±0.02mN ■ Indentation range: 1nm (0.01μm) to 700μm *For more details, please refer to the PDF document or feel free to contact us.
basic information
【Results Obtained from the Test】 ■ By gradually increasing the load up to the set load for measurement, a continuous profile of hardness, indentation depth from the surface, and information on the effects on the material can be obtained. ■ To determine hardness values from the indentation depth of the indenter pushed into the material and the load/indentation depth curve after unloading, it is possible to analyze many physical properties such as Young's modulus, plastic hardness, plastic deformation amount, elastic ratio, and creep, in addition to hardness. ■ By increasing the number of measurements, variations in hardness and other properties can be expressed using standard deviation. *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
