アイテス Official site

Melt Flow Rate (MFR) Measurement Evaluation Service

Leave it to us for everything from chemical analysis and physical testing to reliability testing! Introduction to our measurement and evaluation services.

Plastic extrusion/injection molding processing is set according to the heat resistance temperature (melting point Tm) of the raw materials, but due to the degradation and alteration of the materials, there are cases where molding becomes difficult at the specified setting temperature. By checking the melt flow rate (MFR) of plastic raw material pellets or powders, it is possible to determine whether there are any changes compared to conventional products. We present a case where untreated (no load), temperature and humidity load (constant temperature and humidity test), and UV-irradiated PP (polypropylene) were injected and evaluated at a temperature of 230°C and a load of 5kg, so please take a look at the PDF download. [Evaluation Case] ■PP: Polypropylene ■8585: 85°C 85% × 336 hours ■UV: UV irradiation 253.7nm × 336 hours ■Injection time: 10 minutes (converted from 3 minutes) *For more details, please refer to the PDF materials or feel free to contact us.

Related Link - http://www.ites.co.jp/analyze/index.html

basic information

【Device Specifications】 ■Temperature Range: 100-350℃ (Accuracy ±0.2℃) *For more details, please refer to the PDF document or feel free to contact us.

Price range

Delivery Time

Applications/Examples of results

For more details, please refer to the PDF document or feel free to contact us.

catalog(32)

Download All Catalogs

Total Quality Technology Solutions

PRODUCT

Total solutions for the reliability of semiconductor products.

PRODUCT

Total solution for the reliability of LCD displays.

PRODUCT

Total solution service for power devices

PRODUCT

Total support service for LED.

PRODUCT

Introduction to Reliability Assurance Services

PRODUCT

Total support service for chemical analysis

OTHER

Total Support Service for Reliability

OTHER

Component Analysis: GC-MS Gas Chromatography Mass Spectrometer

PRODUCT

Environmental testing in a high-power constant temperature and humidity chamber.

PRODUCT

Analysis of crystallinity in resin materials using micro-Raman spectroscopy.

PRODUCT

Analysis of multilayer materials using micro-Raman spectroscopy

PRODUCT

Institute of Chemical Reaction Mechanisms

PRODUCT

Observation of time-dependent changes associated with reliability testing.

PRODUCT

[Data] Research Institute of Chemical Reaction Mechanisms - Case Study on the Causes of Material Discoloration

OTHER

[Data] Research Institute of Chemical Reaction Mechanisms, Delamination Mechanism of Heterogeneous Material Interfaces 1

OTHER

Research Institute of Chemical Reaction Mechanisms, Material Degradation Analysis (Decomposition and Deterioration of PET)

TECHNICAL

Shall we make the molecular structure of organic compounds clearer?

TECHNICAL

Analysis of resin materials (for semiconductor LED applications)

TECHNICAL

We assist in research and development with analysis and chemical reaction mechanisms!

PRODUCT

Panel Polarizer Degradation Analysis

OTHER

Would you like to check the degradation of resin using FT-IR analysis?

TECHNICAL

Reliability testing of materials and chemical analysis evaluation after testing.

TECHNICAL

[Data] Analysis of Polymer Structural Changes

OTHER

Melt Flow Rate (MFR) Measurement Evaluation Service

TECHNICAL

[Data] FT-IR Analysis of Transparent Resin

OTHER

[Data] IR Analysis of Vinyl Polymers (Resin Materials)

PRODUCT

[Information] We will solve the cause of the issue from a chemical perspective.

OTHER

Evaluation of distortion and birefringence in plastic molded products.

PRODUCT

Chemical Analysis Trust Service

PRODUCT

Poisson's ratio measurement

TECHNICAL

News about this product(3)

Recommended products

Distributors

Aites was established in 1993, originating from the quality assurance department of the IBM Japan Yasu office. Based on the technical expertise cultivated through cutting-edge defect analysis and reliability assurance of electronic components at the IBM Japan Yasu office, we have provided various products and services that support the development and manufacturing of semiconductors, displays, organic EL, solar cells, and electronic components to customers both domestically and internationally.