We will be exhibiting at the "26th Machine Element Technology Exhibition Osaka" held at Intex Osaka from October 4, 2023. ◇ Event Period October 4 (Wed) - 6 (Fri), 2023, 10:00 - 17:00 ◇ Exhibition Venue Intex Osaka ◇ Booth Number Hall 4, 22-48 ◇ Featured Exhibits ■ [Equipped with Condition Visualization System] i4.0BS(R) This system continuously monitors the temperature and vibration sensor information attached to the ball screw using an ECM (Edge Computing Module), visualizing the condition of the ball screw. In addition to the ball screw i4.0BS(R), the i4.0 series includes the linear guideway i4.0GW(R) and single-axis robots. With the introduction of this series, production managers can perform online abnormal diagnosis, component fatigue analysis, and lubrication control. This contributes to environmentally friendly manufacturing by reducing warm-up time and saving lubricants with a smart lubrication system. Additionally, we will showcase the "Torque Motor Rotary Table," which adopts a zero-backlash direct drive system.

We will be exhibiting at the "Photonix/Photon and Laser Technology Exhibition" held at Makuhari Messe from October 4, 2023. ◇ Event Period October 4 (Wednesday) to 6 (Friday), 2023, 10:00 AM to 6:00 PM (*On the last day, until 5:00 PM) ◇ Exhibition Venue Makuhari Messe ◇ Booth Number Hall 8, No. 49-18 ◇ Featured Exhibits ■ Ultra-thin DD Motor [DMT Series] We will start accepting orders and sales for the new large-diameter type "DMTK3" of the industry’s thinnest class DD motor [DMT Series] from June 2023. With a hollow diameter of 340mm and a thickness of 30mm, it is compatible with 4-12 inch wafers. It is suitable for use in semiconductor manufacturing processes and AOI inspection equipment that require high precision. Additionally, the expanded hollow diameter compared to the conventional lineup allows for more flexible equipment design. The ultra-thin compactness and the hollow diameter that can accommodate cables and air piping also enable the reduction of stage design and assembly man-hours for equipment manufacturers. We will also exhibit "Wafer Transport Robots" and "Wafer Aligners," which incorporate our components to achieve both affordability and high performance.

We will be exhibiting at the "TECHNO-FRONTIER 2023 / 41st Motor Technology Exhibition" held at Tokyo Big Sight from July 26, 2023. ◇ Event Period July 26 (Wednesday) to July 28 (Friday), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 1, 1C-16 ◇ Featured Exhibits ■ Ultra-thin DD Motor [DMT Series] We will start accepting orders and sales for the new large-diameter type "DMTK3" of the industry’s thinnest class DD motor [DMT Series] from June 2023. With a hollow diameter of 340mm and a thickness of 30mm, it is compatible with 4-12 inch wafers. It is suitable for use in semiconductor manufacturing processes and AOI inspection equipment that require high precision. The expanded hollow diameter compared to the conventional lineup allows for even greater design flexibility in equipment. Additionally, we will showcase products that contribute to ESG initiatives. You can also see a stage that combines a single-axis robot (electric actuator) that achieves energy savings through air switching and a ball screw equipped with a state visualization system that contributes to clean manufacturing.

We will be exhibiting at the "28th Mechanical Components Technology Exhibition/M-tech" held at Tokyo Big Sight from June 21, 2023. ◇ Event Period June 21 (Wednesday) to June 23 (Friday), 2023, 10:00 AM to 6:00 PM * Only on the last day, until 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 7, 59-26 ◇ Featured Exhibits ■ [Condition Visualization System Equipped] i4.0BS(R) This system continuously monitors the information from temperature and vibration sensors attached to the ball screw using an ECM (Edge Computing Module), visualizing the condition of the ball screw. In addition to the ball screw i4.0BS(R), the i4.0 series includes the linear guideway i4.0GW(R) and single-axis robots. With the introduction of this series, production managers can perform online abnormal diagnosis, component fatigue analysis, and lubrication control. It contributes to environmentally friendly manufacturing by reducing warm-up time and saving lubricating oil with a smart lubrication system. We will also showcase the "Torque Motor Rotary Table" featuring a zero-backlash direct drive system and the "Thin DD Motor," which boasts an overwhelmingly large hollow diameter.

We will be exhibiting at the "Kansai Robot World 2023/Industrial Robot Exhibition" held at Intex Osaka from June 8, 2023. ◇ Event Period June 8 (Thursday) to June 9 (Friday), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Intex Osaka, Hall 5 ◇ Booth Number 4-8 ◇ Featured Exhibits ■ Vertical Multi-Joint Robot A medium-sized robot with a payload capacity of 5 to 30 kg. It comes standard with collision detection functionality, and its design focuses on flexibility and lightweight construction, bringing the arm length and load capacity closer to that of a human. Key components such as servo motors and bearings are covered by our products, achieving a balance between affordability and functionality. It is suitable for assembly tasks and hanging operations in narrow spaces. ■ AC Servo Motor E1 Series The next-generation AC servo motor E1 series is suitable for automation and electrification in various industries, including FPD, semiconductors, laser processing machines, as well as machine tools, automotive, and inspection/measurement equipment. It can also be delivered as a unit in combination with our electric actuators (single-axis robots). By replacing air cylinders, it contributes to achieving your environmental goals.

We will be exhibiting at the "Total Solution Exhibition for Electronic Devices 2023 / JISSO PROTEC 2023" to be held at Tokyo Big Sight from May 31, 2023. ◇ Event Period May 31 (Wed) to June 2 (Fri), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 4, 4A-09 ◇ Featured Exhibits ■ Wafer Transport Robot Our wafer transport robot features components such as DD motors and high-rigidity cross roller bearings, all manufactured and developed in-house, achieving both high performance and affordability. It is suitable not only for wafer transport but also for PCB and glass substrate transport applications. With no gears, it experiences less aging and has fewer parts, reducing maintenance labor. ■ Wafer Aligner The HPA series of HIWIN Wafer Aligners (HIWIN Pre-Aligner) features a 3-axis control system and utilizes HIWIN single-axis robot modules, achieving high speed, high precision, high rigidity, high efficiency, and space-saving design. ■ Ultra-Thin DD Motor [DMT Series] We will showcase an ultra-thin DD motor with a thickness of 22mm.

We will be exhibiting at "MEX Kanazawa 2023 / 59th Kanazawa Machine Industry Exhibition" held at the Ishikawa Industrial Exhibition Hall from May 18, 2023. ◇ Event Period May 18 (Thursday) to May 20 (Saturday), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Ishikawa Industrial Exhibition Hall ◇ Booth Number Building 3, 4-19 ◇ Featured Exhibits ■ Torque Motor Rotary Table Our rotary table equipped with an in-house manufactured torque motor adopts the "Zero Backlash Direct Drive System (zeroB・DD system)." It achieves smooth and responsive rotation, enhancing advantages in various aspects such as finishing quality, yield improvement, and operational sound quality, supporting the differentiation of machine tools. At this exhibition, we will showcase the RCV series, a one-axis vertical type that is ideal for upgrading three-axis machining centers. Additionally, we will present a three-axis stage equipped with the "Condition Visualization System Ball Screw i4.0BS(R)," contributing to environmental initiatives such as ESG and SDGs.

We will be exhibiting at the "8th Nagoya Machine Elements Technology Exhibition / M-tech Nagoya" held at Port Messe Nagoya from April 12, 2023. ◇ Event Period April 12 (Wednesday) to April 14 (Friday), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Port Messe Nagoya ◇ Booth Number New No. 1 Exhibition Hall, 11-21 ◇ Featured Exhibits ■ [Condition Visualization System Equipped] i4.0BS(R) This system continuously monitors the temperature and vibration sensor information attached to the ball screw using an ECM (Edge Computing Module), visualizing the condition of the ball screw. In addition to the ball screw i4.0BS(R), the i4.0 series includes the linear guideway i4.0GW(R) and single-axis robots. With the introduction of this series, production managers can perform online abnormal diagnosis, component fatigue analysis, and lubrication control. It contributes to environmentally friendly manufacturing by reducing warm-up time and saving lubricating oil with a smart lubrication system. Additionally, we will also showcase a torque motor rotary table that adopts a zero-backlash direct drive system and a thin DD motor boasting an overwhelmingly large hollow diameter.

We will be exhibiting at the "7th RoboDEX / Robot Development and Utilization Exhibition" held at Tokyo Big Sight from January 25, 2023. ◇ Event Period January 25 (Wed) to 27 (Fri), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number West Hall 1, 52-43 ◇ Featured Exhibits ■ Scara Robot Utilizing in-house developed components, it achieves agile, high-precision, and highly flexible movements. By attaching a rotating axis at the tip, it increases freedom of movement, making it one of the robots that can be easily introduced for automation in production lines. ■ Vertical Multi-Joint Robot With high degrees of freedom, it can accommodate a wide working range. We offer a lineup of compact types that can handle agile and complex tasks, as well as high-load types. By exchanging end effectors, it can be applied to various automated production lines. ■ Automation and Labor-Saving Solutions We support your automation and labor-saving needs with an overwhelming product lineup. By combining not only linear and rotary components but also mechatronic parts such as motors and drivers, we provide a lineup that covers industrial robots and ultra-precision positioning stages, offering proposals to reduce your labor hours.

We will be exhibiting at the "37th Internepcon Japan/Electronics Development and Implementation Exhibition" held at Tokyo Big Sight from January 25, 2023. ◇ Event Period January 25 (Wednesday) to January 27 (Friday), 2023, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 1, 3-18 ◇ Featured Exhibits ■ Wafer Transport Robot With key components such as DD motors and high-rigidity cross roller bearings manufactured and developed in-house, we achieve both high performance and affordability. This robot is not limited to wafer transport but can also be used for PCB and glass substrate transport applications. It has no gears, resulting in less aging deterioration and fewer parts, which reduces maintenance workload. ■ Wafer Aligner The HIWIN Pre-Aligner (HPA series) is a 3-axis controlled product that utilizes HIWIN single-axis robot modules, achieving high speed, high precision, high rigidity, high efficiency, and space-saving design. ■ Ultra-Thin DD Motor [DMT Series] A physical display of the upcoming large model DMTK3 will also be showcased.

We will be exhibiting at "SEMICON Japan 2022," which will be held at Tokyo Big Sight from December 14, 2022. ◇ Event Period December 14 (Wednesday) to December 16 (Friday), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 2, 1915 ◇ Featured Exhibits ■ Wafer Transport Robot Key components, including DD motors and high-rigidity cross roller bearings, are manufactured and developed in-house, achieving both high performance and affordability. Suitable not only for wafer transport but also for PCB and glass substrate transport applications. With no gears, it experiences less aging and has fewer parts, reducing maintenance labor. ■ Ultra-Thin DD Motor [DMT Series] The industry’s thinnest class DD motor, the [DMT Series], is 22mm thick. Its overwhelming thinness and large hollow diameter contribute to greater design flexibility for equipment. It boasts high resolution and excellent positioning accuracy, with zero backlash without gears. Additionally, its unique circuit design enables high torque. A large model, DMTK3 (dimensions: 520*520*30mm, hollow diameter 340mm), which will be released soon, will also be on display.

We will be exhibiting at the "32nd Fine Tech Japan / Electronic Display Industry Exhibition" held at Makuhari Messe from December 7, 2022. ◇ Event Period December 7 (Wednesday) to December 9 (Friday), 10:00 AM to 6:00 PM * The last day until 5:00 PM ◇ Exhibition Venue Makuhari Messe ◇ Booth Number Hall 5, 36-36 ◇ Featured Exhibits ■ Wafer Transport Robot Major components, including DD motors and high-rigidity cross roller bearings, are manufactured and developed in-house, achieving both high performance and reasonable pricing. It is suitable not only for wafer transport but also for PCB and glass substrate transport applications. With no gears, it experiences less aging deterioration and has fewer parts, reducing maintenance labor. ■ Ultra-Thin DD Motor [DMT Series] The industry's thinnest class DD motor [DMT Series] has a thickness of 22mm. It boasts high resolution and excellent positioning accuracy, with zero backlash without gears. Additionally, its overwhelming large hollow diameter contributes to increased design flexibility for equipment.

We will be exhibiting at "JIMTOF2022 / 31st Japan International Machine Tool Fair," which will be held at Tokyo Big Sight (Tokyo International Exhibition Center) from November 8, 2022. ◇ Event Duration November 8 (Tuesday) to November 13 (Sunday), 10:00 AM to 5:00 PM * The last day will be until 4:00 PM. ◇ Exhibition Venue Tokyo Big Sight (Tokyo International Exhibition Center) ◇ Booth Number West Hall W2048 ◇ Featured Exhibits At this exhibition, we will showcase three solutions: Machine Tool Solutions, Automation and Labor-Saving Solutions, and Total Solutions, under the catchphrase "Connect & Expand." ■ Machine Tool Solutions We will present a variety of products, including the "i4.0 Series" linear motion devices equipped with condition visualization systems and direct drive rotary tables, which contribute to predictive maintenance, 5-axis machining, complex shape processing, automated processing, and eco-friendly manufacturing that also supports ESG initiatives. In the venue, we will display not only machine tools equipped with these products but also numerous demo units of various rotary tables.

We will be exhibiting at the 5th Nagoya Nepcon Japan (Electronics Development and Implementation Exhibition) held at Port Messe Nagoya from October 26, 2022. ◇ Event Period October 26 (Wed) to 28 (Fri), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Port Messe Nagoya, New No. 1 Exhibition Hall ◇ Booth Number 14-20 ◇ Featured Exhibits ■ High-performance, high-rigidity wafer transport robot Achieves both high performance and affordability / Reduces takt time / Long-lasting due to no gears. Major components, including expensive DD motors, are manufactured and developed in-house. Our high-quality and reasonably priced robot, which integrates hardware and software, contributes to the differentiation of your products. You can see a demo unit of the wafer transport robot at our exhibition booth. ■ Unmatched thinness and large hollow diameter! We will also exhibit the industry’s thinnest class DD motor, the DMT series. With a thickness of about 22mm, it contributes to increased design freedom with its overwhelming large hollow diameter and excellent positioning accuracy. When combined with our linear motors, it is relatively easy to assemble a high-precision positioning XYθ stage with an overall height of about 250mm.

We will be exhibiting at the 5th Nagoya Robodex (Robot Development and Utilization Exhibition) held at Port Messe Nagoya from October 26, 2022. ◇ Event Period October 26 (Wednesday) to 28 (Friday), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Port Messe Nagoya, Hall 3 ◇ Booth Number 22-28 ◇ Featured Exhibits ■ Automation and Labor-Saving Solutions We will propose solutions to reduce your labor costs with an overwhelming lineup that covers not only linear and rotary components but also mechatronic parts such as motors and drivers, extending to industrial robots and ultra-precision positioning stages. You will be able to see SCARA robots and vertical multi-joint robots at our exhibition booth. ■ AC Servo Motors with Short Delivery Times With global delivery times becoming longer, AC servo motors are essential for automation and labor-saving needs. At Hiwin, we can offer short delivery times. We have a lineup of rated outputs from 50 to 2000W, and we can provide our drivers as a one-stop solution.

We will be exhibiting at M-Tech Kansai (the 25th Kansai Machine Elements Technology Exhibition) held at Intex Osaka from October 5, 2022. ◇ Event Period October 5 (Wed) - 7 (Fri), 2022, 10:00 AM - 5:00 PM ◇ Exhibition Venue Intex Osaka ◇ Booth Number Hall 4, 17-47 ◇ Featured Exhibits ■ Condition Visualization System Equipped Ball Screw i4.0BS This system continuously monitors the temperature and vibration sensor information attached to the ball screw using an ECM (Edge Computing Module), visualizing the condition of the ball screw. Production managers can perform online abnormal diagnosis, component fatigue analysis, and lubrication control. It also meets the needs for predictive maintenance to maintain production line performance and environmentally friendly clean manufacturing. ■ Rotary Table Suitable for Retrofit and High-Precision Indexing Our in-house developed rotary table with a torque motor and zero backlash direct drive system achieves smooth and responsive rotation. It enhances advantages in various scenarios such as improving finish quality and yield, supporting the differentiation of machine tools.

We will be exhibiting at the Monozukuri Fair 2022, held at Marine Messe Fukuoka from October 5, 2022. ◇ Event Period October 5 (Wed) to October 7 (Fri), 2022, 10:00 AM to 5:00 PM * The final day will end at 4:00 PM. ◇ Exhibition Venue Marine Messe Fukuoka ◇ Booth Number Hall A, AS-49 ◇ Featured Exhibits ■ Automation and Labor-Saving Solutions We will propose ways to reduce your labor costs with an overwhelming lineup that covers not only linear and rotary components but also mechatronic parts like motors and drivers, extending to industrial robots and ultra-precision positioning stages. You can see a SCARA robot and a wafer handling robot at our booth. ■ Quick Delivery of AC Servo Motors, Leave it to Us AC servo motors, essential for automation and labor-saving needs, are facing longer delivery times globally. With HIWIN, quick delivery is possible. We offer a lineup of rated outputs from 50 to 2000W, and our drivers can be supplied in a one-stop solution.

We will be exhibiting at TECHNO-FRONTIER 2022 (the 40th Motor Technology Exhibition) held at Tokyo Big Sight from July 20, 2022. ◇ Event Period July 20 (Wednesday) to July 22 (Friday), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 1, 1B-18 ◇ Featured Exhibits ■ Rotary table suitable for retrofitting and high-precision indexing Our rotary table, equipped with a proprietary torque motor and featuring a zero backlash direct drive system, achieves smooth and responsive rotation. It enhances advantages in various scenarios such as finishing quality and yield improvement, supporting the differentiation of machine tools. ■ Unmatched thinness and large hollow diameter! We will also showcase the industry’s thinnest class DD motor, the DMT series. With a thickness of approximately 22mm, it contributes to increased design flexibility with its overwhelming large hollow diameter and excellent positioning accuracy. When combined with our linear motors, it is relatively easy to assemble a high-precision positioning XYθ stage with an overall height of about 250mm.

We will be exhibiting at the 27th Mechanical Components Technology Exhibition M-Tech, held at Tokyo Big Sight from June 22, 2022. ◇ Event Period June 22 (Wednesday) to June 24 (Friday), 2022, 10:00 AM to 6:00 PM Only on the final day until 5:00 PM ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 6, 44-6 ◇ Featured Exhibits ■ Zero Backlash Direct Drive System Hiwin's rotary table (circular table) enables multi-axis synchronized machining, simultaneous 5-axis machining, and the implementation of high-precision indexing tables. It is equipped with our own water-cooled torque motor suitable for high torque applications. It contributes to increased productivity with high speed, high rigidity, and high precision. ■ Automation and Labor-Saving Solutions We propose to reduce your labor hours with an overwhelming lineup that covers not only linear and rotary components but also mechatronic parts such as motors and drivers, extending to industrial robots and ultra-precision positioning stages. At the exhibition venue, you can see demonstration units including the scara robot, which we recommend considering first when introducing automation, as well as gantry stages.

We will be exhibiting at the Kansai Robot World 2022 / 5th Industrial Robot Exhibition, held at Intex Osaka from June 9, 2022. ◇ Event Period June 9 (Thursday) to June 10 (Friday), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Intex Osaka ◇ Booth Number 4-4 ◇ Featured Exhibits ■ Automation and Labor-Saving Solutions We will propose a comprehensive lineup that covers not only linear and rotary components but also mechatronic parts such as motors and drivers, aimed at reducing your labor hours with industrial robots and ultra-precise positioning stages. You will be able to see demonstrations of highly flexible vertical multi-joint robots and electric grippers at our booth. ■ Thickness of 22mm! Slim Direct Drive Motor The DMT series features an overwhelming large hollow diameter and thinness, along with high resolution for excellent positioning accuracy and high torque due to its unique magnetic circuit design. When combined with our linear motors, it easily realizes an XYΘ stage with an overall height of about 250mm. This not only reduces the assembly labor hours of the stage but also contributes to space-saving and low center of gravity improvements in automation equipment, labor-saving devices, and transport equipment, enhancing the rigidity of the system.

We will be exhibiting at "MEX Kanazawa 2022" within the Nagoya Manufacturing World 2022, held at the Ishikawa Industrial Exhibition Hall from May 19, 2022. ◇ Event Period May 19 (Thursday) to May 21 (Saturday), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Ishikawa Industrial Exhibition Hall ◇ Booth Number Building 3, Booth 3-17 ◇ Featured Exhibits ■ Zero Backlash Direct Drive System Hiwin's rotary table (circular table) enables multi-axis synchronized machining, simultaneous 5-axis machining, and high-precision indexing tables. It is equipped with our own water-cooled torque motor suitable for high torque applications. It contributes to increased productivity with high speed, high rigidity, and high precision. ■ Automation and Labor-Saving Solutions We offer proposals to reduce your labor costs with an overwhelming lineup that covers not only linear and rotary components but also mechatronic parts such as motors and drivers, extending to industrial robots and ultra-precision positioning stages. At the exhibition venue, you can see demonstrations of highly flexible vertical multi-joint robots and electric grippers.

We will be exhibiting at the "7th Nagoya Machine Element Technology Exhibition" within the Nagoya Manufacturing World 2022, held at Port Messe Nagoya (Aichi Prefecture) from April 13, 2022. ◇ Event Period April 13 (Wed) to 15 (Fri), 2022, 10:00 AM to 5:00 PM ◇ Exhibition Venue Port Messe Nagoya ◇ Booth Number Hall 1, 6-32 ◇ Featured Exhibits ■ Zero Backlash Direct Drive System Hiwin's rotary table (circular table) enables multi-axis synchronized processing, simultaneous 5-axis processing, and high-precision indexing tables. It is equipped with our own water-cooled torque motor suitable for high torque applications. It contributes to increased productivity with high speed, high rigidity, and high precision. ■ Automation and Labor-Saving Solutions We offer overwhelming lineup solutions that cover not only linear and rotary components but also mechatronic parts such as motors and drivers, helping to reduce your labor hours with industrial robots and ultra-precision positioning stages. At the exhibition, you can see demonstration units, including a scara robot that we recommend considering first when introducing automation, as well as gantry stages.

We will be exhibiting at the "6th RoboDEX - Robot [Development] and [Utilization] Exhibition" held at Tokyo Big Sight (Tokyo) from January 19, 2022. 【“The Best Partner for Supporting Next-Generation Manufacturing” Industry 4.0】 We will showcase our SCARA robots, which are useful for assembly tasks and pick-and-place operations, as well as electric grippers that can be immediately used with collaborative robots. Our company, which develops and manufactures linear guide equipment, motors, drivers, and controllers in-house, will propose total solutions that contribute to the automation of production sites. We invite you to visit our booth. ◇ Event Period January 19 (Wed) to 21 (Fri), 2022, 10:00 AM to 6:00 PM (Only on the last day until 5:00 PM) ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 7, 53-24 ◇ Featured Exhibits ■ Achieving high precision and high-speed operation with a compact and flexible rotating axis SCARA robots for transportation, assembly, and coating: RS Series ■ Supporting everything from PoC (Proof of Concept) to implementation in automation Robot Technology Center and manufacturing support services

We will be exhibiting at the "36th NePCON Japan - Electronics Development and Manufacturing Expo" held at Tokyo Big Sight (Tokyo) from January 19, 2022. 【"Supporting Next-Generation Manufacturing" - The Best Partner for Industry 4.0】 We will showcase our wafer transport robots equipped with DD motors, which are active in semiconductor manufacturing equipment, as well as high-precision positioning systems compatible with mounting and inspection/testing equipment. We will propose a total solution unique to our company, which develops and manufactures various motors, drivers, and controllers from linear guide devices. We invite you to visit our booth. ◇ Event Period January 19 (Wed) - 21 (Fri), 2022, 10:00 - 18:00 (Only on the final day until 17:00) ◇ Exhibition Venue Tokyo Big Sight ◇ Booth Number East Hall 2, 13-12 ◇ Featured Exhibits ■ High performance and reasonable Wafer transport robot: RW series ■ A rich product lineup that realizes all positioning mechanisms Gantry mechanism combining linear and rotational motion ■ Capable of constructing low-profile XYΘ stages Industry's thinnest class DD motor: DMT series

We will be exhibiting at "SEMICON Japan 2021," an international exhibition related to the semiconductor manufacturing supply chain, including manufacturing technologies, equipment, and materials. We will showcase our wafer transfer robots equipped with DD motors, as well as electric grippers that can be used immediately with collaborative robots. Our company, which develops and manufactures linear guide devices, motors, drivers, and controllers in-house, will propose total solutions that contribute to each process of semiconductor manufacturing. We invite you to visit our booth when you attend. ◇ Event Dates December 15 (Wednesday) - 17 (Friday), 2021, 10:00 AM - 5:00 PM ◇ Venue Tokyo Big Sight ◇ Booth Number East Hall 2, 2409 ◇ Featured Products/Services ■ Wafer Transfer Robot "RW Series" ■ Robot Technology Center Mobile Lab ■ AC Servo Motors, Linear Motors, DD Motors

We will be exhibiting at Japan's largest machine tool trade fair, "Mecatronics Tech Japan 2021." We will introduce our zero-backlash direct drive rotary tables, including a dual-axis dual-support type, a compact dual-axis cantilever type, and vertical and horizontal single-axis models. These are recommended for simultaneous and synchronized processing, as well as additional single-axis applications! Additionally, as a first-time initiative, we will set up a mobile lab from our Robot Technology Center. Consultations and verifications are free! You can bring your own workpieces on the day! For more details, please refer to the materials. ◇ Event Period October 20 (Wed) - 23 (Sat), 2021, 10:00 AM - 5:00 PM On the 22nd (Fri), until 6:00 PM / On the 23rd (Sat), until 4:00 PM ◇ Exhibition Venue Portmesse Nagoya ◇ Booth Number Hall 1, 1A-57 ◇ Featured Products/Services ■ Rotary Tables [RAS Series, RCV Series] ■ Mobile Lab from the Robot Technology Center ■ Ball Screw with Condition Visualization System i4.0BS * Pre-registration required (1,000 yen per person for entry without pre-registration)

We will be exhibiting at the "24th [Kansai] Machine Elements Technology Exhibition M-Tech" held within the Kansai Monozukuri World from October 6, 2021. Our company will propose Hiwin total solutions that cater to a wide range of needs, from individual components to precision positioning stages and automation systems, utilizing our extensive product lineup. To prevent the spread of infection at the exhibition, we will refrain from distributing catalogs. Please feel free to ask, as we will send them to you later by mail or other means! ◇ Event Period October 6 (Wed) - 8 (Fri), 2021, 10:00 AM - 5:00 PM ◇ Exhibition Venue Intex Osaka ◇ Booth Number Hall 1, 13-23 ◇ Featured Exhibits ■ Hiwin Total Solutions ■ Ball Screw i4.0BS with Condition Visualization System ■ Vertical Multi-Joint Robot Free invitation tickets are currently being distributed! *Regular admission fee: 5,000 yen/person

We will be exhibiting at the "39th Motor Technology Exhibition" within Techno Frontier 2021, which will be held from June 23, 2021. Our company will showcase products such as rotary tables suitable for retrofitting and indexing tables, as well as equipment and automation solutions that address customer needs, contributing to solving customer challenges under the theme "Supporting Next-Generation Manufacturing." The online exhibition is already underway! ◇ Event Period In-person Exhibition: June 23 (Wednesday) to June 25 (Friday), 2021, 10:00 AM to 5:00 PM Online Exhibition: June 8 (Tuesday) to July 16 (Friday), 2021 ◇ Exhibition Venue Tokyo Big Sight, Aomi Exhibition Hall ◇ Booth Number Hall B, BI-02 ◇ Featured Exhibits ■ Rotary Table [RCV Series] Single-axis Vertical Type ■ Ultra-thin DD Motor [DMT Series]

◆◆If you would like a free invitation ticket, please feel free to contact us!◆◆ (*Regular admission fee: 5,000 yen) We will be exhibiting at the "6th [Nagoya] Machine Element Technology Exhibition M-Tech" within the Nagoya Manufacturing World, which will be held from April 7, 2021. Our company will propose high-win total solutions that meet a wide range of needs, from individual components to precision positioning stages and automation systems, utilizing our extensive product lineup. The event will also be held online, allowing you to attend from home or the office. At the physical exhibition, we plan to operate with about half the usual number of staff for infection prevention. We apologize for any inconvenience this may cause and appreciate your understanding. ◇ Event Period April 7 (Wed) - 9 (Fri), 2021, 10:00 AM - 5:00 PM ◇ Exhibition Venue Port Messe Nagoya ◇ Booth Number 1st Exhibition Hall, 11-28 ◇ Featured Exhibits ■ Rotary Table [RAS Series] 2-axis cantilever type ■ Rotary Table [RCV Series] 1-axis vertical type ■ Ball Screw with Upper Floor Visualization System [i4.0BS]

We will be exhibiting at the "25th Mechanical Components Technology Exhibition M-Tech" within the Japan Manufacturing World, which will be held from February 3, 2021. Our company will propose Hi-Win total solutions that meet a wide range of needs, from individual components to precision positioning stages and automation systems, utilizing our extensive product lineup. The event will also be held online, allowing you to attend from home or the office. At the physical exhibition, we plan to operate with about half the usual number of staff to prevent infection. We appreciate your understanding as this may cause some inconvenience. ◇ Event Period January 20 (Wednesday) to 22 (Friday), 2021, 10:00 AM to 6:00 PM (until 5:00 PM on the final day) ◇ Venue Tokyo Big Sight, Aomi Exhibition Hall ◇ Booth Number A1-17 ◇ Featured Exhibits ■ Electric Gripper ■ Vertical Multi-Joint Robot ■ Scara Robot * Admission fee is 5,000 yen. Please contact us if you would like a free invitation ticket.