All products and services
1～26 item / All 26 items
-
Infrastructure Data Mapping Device
Visual data through mapping. ~Accurately and objectively sharing degradation information~
last updated
-
Ultrasound diagnostic device
Data collected through sound and ultrasound is analyzed and judged by AI.
last updated
-
Hollow shaft coaxiality ultrasonic inspection device
By rotating a hollow shaft (cylindrical shape) and measuring the wall thickness with ultrasound, the coaxiality of the inner and outer circles is measured!
last updated
-
Disc brake inspection machine
Automatically measured by a pre-set program! The inspection materials are automatically transported to the next process.
last updated
-
Cylinder block bore ultrasonic testing device
The mechanism section consists of the drive axes: X-axis, Z-axis, R1-axis, and R2-axis! Each is driven by servo for scanning.
last updated
-
Bush material ultrasonic flaw detection device
The inspection is automatically determined based on specified conditions! Work input and output are manual operations.
last updated
-
Pulley ultrasonic testing device
The inspection pitch can be set arbitrarily from 0.1 to 2.0 mm! The NG shooter is installed on the right side of the device.
last updated
-
Piston pin lip eddy current testing device
Defects of 0.2 to 0.3 mm or more are targeted! Inspection results are displayed on the inspection monitor as a map.
last updated
-
Plate joint inspection scanner
Image processing of ultrasonic signals based on location information! Expanding into floor plans and cross-sectional views to monitor and display the position and shape of defects.
last updated
-
Automatic Thickness Measurement Device <Portable, Vacuum Type>
The measurement accuracy is 0.01mm! The measured thickness data is displayed on the laptop monitor.
last updated
-
Thrust plate measurement device
Equipped with two operation modes (manual/automatic) and three driving modes (individual/local/remote)!
last updated
-
【Delivery Example】Copper Rod Ultrasonic Inspection Device
Detecting internal defects in round steel bars using ultrasound! The results are displayed on the control panel monitor.
last updated
-
Ultrasound scanning device
Configuration with an ultrasonic flaw detector and data processing computer! Setting of inspection conditions, saving results, and reading them is possible.
last updated
-
Ultrasonic testing device for BP materials
Evenly arrange 5 ultrasonic probes! By moving in the X-Y axis direction, inspect the entire surface for flaws.
last updated
-
Automatic Piston Ultrasonic Testing Device
By rotating the piston, it is possible to inspect the measurement points all around!
last updated
-
Piston ultrasonic inspection device <manual>
The finished pistons are subject to inspection! If the type of work changes, it is necessary to change the setup to a dedicated jig.
last updated
-
[Delivery Example] Graphite Spheroidization Rate Determination Device
Numerous delivery achievements from major domestic and international automobile manufacturers! It is possible to manage the sphericity rate.
last updated
-
Sound testing device
Analyze the inherent frequency of materials and apply it to various inspections, including cracks and different materials!
last updated
-
[Case Study] Ultrasonic Scanning Inspection Equipment
The ultrasonic probe can be operated to perform inspections within the specified range!
last updated
-
【Delivery Case】Multi-channel Ultrasound Inspection Device
Using ultrasound! Simultaneous measurement at multiple inspection points for internal defects and material identification of products.
last updated
-
[Delivery Example] Ultrasonic and Impact Sound Combined Inspection Device
Inspect internal defects, surface cracks, material identification, and thickness measurement with a single system!
last updated
-
[Case Study] Forged Cross-Roll Ultrasonic Testing Device
By placing a sensor on the inspection point and rotating the workpiece, inspection around the entire circumference is possible!
last updated
-
[Delivery Example] Piston Ultrasonic Testing Equipment
Using ultrasound! Simultaneous measurement at multiple inspection points such as internal defects, wall thickness, and joint conditions of the product.
last updated
-
【Delivery Example】Eddy Current Inspection System
Automatically measure and detect surface cracks in products using eddy currents!
last updated
-
【Delivery Example】Piston Pin Eddy Current Testing Device
Comprehensive high-speed inspection of surface cracks on cylindrical metal products!
last updated
-
[Delivery Example] Eddy Current Testing Device for Brake Disc Rotors
Using eddy currents to automatically measure and detect surface cracks in products with multiple channels, reducing inspection time!
last updated