Metal mask cleaning
Metal mask cleaning
When manufacturing printed circuit boards, cream solder, adhesive, and thick film paste are printed using metal masks, plastic masks, or screens. Residues of cream solder and adhesive on the surface and openings of the metal mask can lead to printing errors and curing issues, making manual wiping cleaning or automatic cleaning processes for metal masks and screens essential. - Removal of Pb-free and eutectic solder (no-clean type) - Removal of thick film paste - Removal of adhesive - Automatic metal mask cleaning - Manual wiping metal mask cleaning - Preventing the disposal of printed circuit boards (PCBs) with printing errors through cleaning of misprinted boards - Back wiping cleaning of metal masks in printing machines
1～12 item / All 12 items
-
Water-based cleaning agent for metal masks VIGON SC 200
Sure! Here is the translation: "A water-based metal mask cleaner that reliably cleans cream solder and SMT adhesive, also usable for wiping the back of printing machines."
last updated
-
Metal Mask Back Cleaning Agent VIGON UC 160
Remove IPA, safe and environmentally friendly! Excellent wettability against non-woven fabric significantly reduces the surrounding area of cream solder.
last updated
-
Metal mask printing error substrate cleaning agent VIGON SC 202
Removes cream solder and SMT bond! As it is a water-based cleaning agent, it has no flash point and offers high safety.
last updated
-
Metal mask wipes for hand drying VIGON SC 200
Also serves as an alternative to cleaning with solvent-based spray wipes! Cleanup is simply disposing of the wipe.
last updated
-
Water-based cleaning agent VIGON SC210 for SMT adhesives and metal masks
The VOC value is significantly below 20%! It can be used without explosion-proof equipment as there is no flash point.
last updated
-
Water-based cleaning agent for metal masks VIGON TC 150
Water-based cleaning agent for conductive paste, also usable for removing silver sinter paste from metal masks and screen plates!
last updated
-
Cleaning agent for metal masks ZESTRON SD 100
Low odor, usable at room temperature! Cream solder cleaning agent for metal masks and screens.
last updated
-
Cleaning agent for metal masks ZESTRON SD 301
Due to its high contamination retention capability, it has a long lifespan and reduces cleaning costs!
last updated
-
Water-based cleaning agent for metal masks - HYDRON SC 300
Since the water-based cleaning agent has no flash point, explosion-proof specifications are not required for the cleaning equipment!
last updated
-
Points to confirm for metal mask cleaning: How to choose cleaning agents and cleaning methods.
It is possible to carry out cleaning with consideration for the environment! Introducing cleaning know-how.
last updated
-
Cleaning Test [Consistent support from cleaning to cleanliness analysis]
After the test is completed, a technical report detailing recommended processes and other information will be submitted!
last updated
-
Metal mask cleaning agent "ZESTRON SW" *Can be used without vacuum drying.
Due to its wide applicability, it reliably removes cream solder from the back of the metal mask!
last updated
