■Mechanism of Gravity Concentration Sludge is collected in a tank and left undisturbed to allow solids to settle. The thick sludge that accumulates at the bottom is gathered and extracted using a scraper. ■Simple Structure Gravity concentration is characterized by its simple mechanism and structure, requiring very little power. It is mainly used for sludge from initial sedimentation tanks and for sludge mixed with excess sludge. ■What Methods Are There for Mechanical Concentration? 1. Centrifugal Concentration: Separating solids using centrifugal force 2. Atmospheric Floating Concentration: Floating solids by attaching them to bubbles 3. Belt Filtration Concentration: Draining water on a moving belt These methods are primarily used for excess sludge generated from biological treatment. In floating concentration, polymer coagulants are used to make solids more likely to attach to bubbles. ■How Concentrated Can It Get? In the case of wastewater sludge, the moisture content after concentration is approximately as follows for each method: 1. Gravity Concentration: About 96-98% 2. Mechanical Concentration: About 95-96% When converted to the percentage of solids, gravity concentration results in about 2-4%, while mechanical concentration results in about 4-5%. Comparing the numbers shows that mechanical methods can achieve a higher concentration more easily.

■ The power of gravity concentration can decrease! In some treatment plants, the ability of gravity concentration has declined, leading to an increase in the adoption of mechanical concentration. On the other hand, there are examples where the gravity concentration tanks have been improved, raising the concentration of the concentrated sludge from around 3% to around 4%. In this case, the amount of cake produced during subsequent dewatering decreased, and the presence of hydrogen sulfide and odors also diminished. ■ When comparing the capabilities of machines? Belt-type machines concentrate sludge with a concentration of 0.3% to 1.5% up to 4% to 5%, with a solid recovery rate of over 95%. Screw-type machines can concentrate sludge from 0.3% to 2.0% to over 4%, while the recovery rate of centrifugal types is around 90%. The recovery rate indicates how much of the solids in the sludge can be extracted as concentrated sludge. It’s important to compare not only how concentrated it can get but also the amount of loss. ■ Things to check first When considering a review of gravity concentration, the first step is to understand the condition of the sludge. 1. Concentration and properties of the concentrated sludge 2. Condition of the interface 3. Occurrence of scum The effectiveness of concentration also affects subsequent digestion and dewatering processes. Please feel free to consult with us first.