■ Job Posting Service/Repair Technician You will be involved in testing and calibrating flow measurement for industrial controllers (equipment adjustment), as well as disassembling, cleaning, and reassembling industrial equipment brought to the service/repair department. You will also create estimates for the repair/calibration of industrial devices and perform disassembly, repair, and assembly of devices. ■ Key Duties and Responsibilities - Unpacking devices - Repairing devices - Processing device receipt and creating estimates using internal systems - Communicating with customers via email - On-site calibration work at customer factories (a few times a year, approximately 3 days each time) *Those with language skills will participate in global meetings. For more details about the position description and other information, please check the following page: https://www.brooksinstrument.com/ja-jp/about-us/careers Application: Please send your resume (with photo, in both English and Japanese) to the following address: HR.Japan@BrooksInstrument.com *You can also apply through CareerCross.

In the manufacturing process of active pharmaceutical ingredients for biopharmaceuticals, including antibody drugs and vaccines, the goal is to culture and scale up viruses and cells, which requires creating an environment conducive to the survival of the target organisms. It is necessary to monitor pH levels and dissolved oxygen concentrations while controlling the flow rates of air, oxygen, nitrogen, and carbon dioxide with mass flow controllers (MFCs) to maintain an optimal culture environment. Our mass flow controllers (MFCs) have a comprehensive lineup ranging from ultra-low flow rates (3 ssm) to high flow rates (2500 slm), and they have a proven track record in many culture systems both domestically and internationally, from research and development to mass production facilities. Additionally, our new bio-option specification MFC achieves a range ratio of 3 to 5 times compared to traditional rangeability (2-100% of full scale), allowing for more precise low-flow control with a single MFC. It is also possible to use elastomer materials that comply with FDA/USP Class VI requirements, which are demanded by the pharmaceutical and medical industries.

Latest Pressure-Based Mass Flow for Cutting-Edge Semiconductor Processes The GP200 series adopts differential pressure sensors instead of conventional pressure sensors and positions the control valve downstream of the sensor, significantly improving the accuracy and reproducibility of flow measurement compared to traditional pressure-based MFCs. * By measuring differential pressure with a single sensor, flow accuracy and reproducibility are dramatically enhanced. * It accommodates a wide range of pressures, gas types, and processes. * Advanced valve architecture enables more accurate and reproducible flow control and responsiveness. * Zero-leak valves eliminate the "first wafer effect."

The sales contact for Brooks Instrument's capacitance manometers (CMX series and CMC series) has officially changed to Megatorr Corporation. *In October 2020, Megatorr Corporation was added as the official distributor for capacitance manometers. For inquiries regarding our vacuum measurement capacitance manometers, please contact Megatorr Corporation. Megatorr Corporation Headquarters Sales Department 2-14 Yoshihama-cho, Naka-ku, Yokohama, Kanagawa 231-0024, Japan T: 045-222-0035 F: 045-222-0016 http://megatorr.co.jp/

- Due to the spread of the new coronavirus, visits from outside the company are restricted. - It is difficult to hold face-to-face meetings while working remotely. - I would like to hear a product explanation, but information is insufficient through email or phone. - It is challenging to find time for meetings. To respond to such customer requests, we have started an online product explanation service. By conducting product explanations in a video conference format, we believe that we can provide a meeting experience that is almost the same as face-to-face, allowing customers to gain a deeper understanding of our products while sharing materials. Please feel free to use our online product explanation service. <Flow of Online Product Explanation> ▼ STEP 1 | Application ▼ STEP 2 | Application Acceptance We will send you the date and time for the online product explanation and the video conference link via email from our representative. ▼ STEP 3 | Online Product Explanation On the day of the meeting, access the link provided in the email to start the video conference. We will use Microsoft Teams or Skype for Business for the video conference. Installation of the software is not required, but please feel free to consult us if you have requests for other services.

Since July 2019, a mass flow controller specifically designed for bioprocesses has been added to the Brooks general-purpose mass flow controller product line. Mass flow controllers designed and manufactured specifically for bioprocesses: - Special products based on the SLA series, which has a proven track record for the majority of general industries, including bioprocesses. - Available in two optional packages to optimize customer needs. - Capable of handling a wide range of flow control from small to large flow rates, accommodating both small and large bioreactors. Flexible response to customer demands - Product features: * Reduction of maintenance and installation costs. * Decrease in manufacturing risks. * Strengthening of quality control. Proposal for two optional package products: 1. Performance Option Package (mass flow controller products specifically designed for many bioprocesses). 2. Premium Option Package (mass flow controller products designed to meet more stringent requirements).

BROOKS takes pride in swiftly providing mass flow controllers, one of the devices needed by our customers in the medical equipment sector fighting against the coronavirus. In the current crisis situation, we must continue to focus on "what is important." The relationship between Brooks Instrument and medical device manufacturers like Maxtec has become more critical than ever in the midst of the coronavirus pandemic. We are prepared to meet the increasing demand for products from healthcare professionals worldwide directed at medical device manufacturers, including Maxtec.

The introduction of a mass flow controller (MFC) that can control flow rates down to 0.4% of full scale due to a 1:250 turndown allows for the construction of a system that can be completed with one MFC instead of the two that were previously necessary. The SLA series equipped with EtherNet/IP and PROFINET protocols can be easily included in these large packages along with advanced diagnostic tools. Older PLC and DCS systems provide flow rates and set points (PV) to help customers monitor and make important process-related decisions. Brooks Instrument's advanced diagnostics offer many predictive, trend analysis, and reliability-driven parameter solutions that can be monitored in real-time. Choke flow, backsteaming, calibration drift over time, and total flow to the MFC are all examples of valuable parameters that can be monitored. By implementing these protocols, the startup and access to Siemens, Delta-V, and Rockwell Automation PLC systems can be expedited.

Brooks Instrument provides support for all mass flow devices previously sold by various manufacturers, including Tylan General, Mykrolis, Entegris, UNIT, Kinetics, and Celerity, as shown in the "Brooks MFC Genealogy Chart" on the right. This accounts for approximately 80% of the legacy mass flow devices in the market. In response to customer requests, we may suggest repairs in some cases, and in others, we may recommend replacement with our best-selling mass flow devices, the GF120 or GF125. We have already replaced over 20,000 units from these legacy devices to the GF series. It is possible to replace nearly all models of legacy mass flow devices featured in the "Brooks MFC Genealogy Chart." If you are having trouble with repairs or replacements of legacy mass flow devices, please feel free to consult our sales department.

The latest support software is BEST (Brooks Enhanced Support Tool), and we have released the latest version 5.4.0.0. Some features, such as flow calibration with the reference device, require a paid license, and connection cables are also available for purchase. Customers who are not yet using Brooks' support software are encouraged to consider using BEST at this opportunity. By using the support software, we provide various functions and advantages that are not possible with mass flow alone. ■ Mass flow adjustment: Zero point and valve response adjustment (PID tuning) ■ Setting changes: Alarm settings, input/output settings ■ Control and monitor: Saving and restoring mass flow configuration files ■ Various diagnostic functions: Checking various error information that cannot be determined by the blinking of the device's LED ■ Simple operation: Control of flow and valve opening from the software ■ Paid optional features: Flow calibration with the reference device, support for terminal commands Please contact us for specifications, licensing requirements, and operating instructions.

We have revised the manual for the MultiFlo configurator used with our core mass flow controller (hereinafter referred to as MFC), the GF125 series. The major change is the type of cable used for communication between the MFC and the computer. ■ What is the Brooks MultiFlo Configurator? The MultiFlo configurator software for Windows operating systems allows for easy and quick reconfiguration of gas and range without removing the mass flow controllers from the gas line for the GF100 series, GF40 series, GF80 series, and Celerity/Unit brands. MultiFlo technology is a patented technology by Brooks Instrument that provides unique resources to process engineers. The user-friendly MultiFlo configurator application is equipped with the most comprehensive gas database on the market, enabling the use of MultiFlo-compatible MFCs across a wide range of applications by improving the accuracy of process gases.

The GT1600 series glass tube area flow meters are a new family of meters designed for long-term use in processes where confirming flow rates is crucial, suitable for low and high flow gas and liquid applications, featuring robust performance and sturdy housing and design. These versatile and cost-effective flow meters are commonly used in applications that require moderate measurement accuracy. ■ Depending on the selected model, the typical accuracy range is from 1% to 10% of full scale. ■ Ideal for purge-type services, seal oil systems, bearing lubrication, and cooling water display. The GT1600 series flow meters can be configured to replace or upgrade existing Brooks Instrument GT1000, GT1300, and Full-View(R) 1100 series meters (models 1110, 1114, 1140, 1144).