ティックコーポレーション 本社 Official site

Powerful impact force with laminar flow! Contributes to the efficiency of deburring operations and noise reduction measures.

【Features】 - Powerful impact force due to laminar flow - Optimization of air consumption with orifice cover - Noise level suppression - Materials suitable for use in food, medical, and pharmaceutical fields - Straight blow pattern (47mm width) 【Our Strengths】 Tick Corporation offers products that contribute to energy saving, high efficiency, and noise problem solutions. We provide optimal product selection tailored to customer needs and technical support.

Efficiently remove fine dust from the circuit board with a rotating air knife!

【Features】 - The rotary air knife accommodates complex-shaped substrates. - High dust removal efficiency due to high-speed air ejection. - Energy-saving design. - Made of stainless steel, excellent durability and chemical resistance. - Compatible with various slot lengths. 【Our Strengths】 Tick Corporation provides optimal products tailored to customer needs. With a rich lineup and expertise, we support problem-solving.

Low noise, energy-saving, high functionality! Reducing the cost of glass cleaning.

【Features】 - Low noise design: Reduces noise levels and improves the working environment. - Energy-saving design: Minimizes air consumption and reduces running costs. - High functionality: Achieves efficient water removal and drying with powerful impact force. - Two types of blow patterns: Available in flat and round types, allowing selection based on application. - Orifice cover: Can close the nozzle to suppress unnecessary air blow. 【Our Strengths】 Tick Corporation provides optimal products tailored to customer needs. With expertise and a wide range of offerings, we support customers in solving their challenges.

Low noise, energy-saving, high functionality! Contributing to the cleanliness of electronic devices.

【Features】 - Low noise design - Energy-saving design - Powerful impact force - Two types of blow patterns (flat type, round type) - Nozzle opening and closing possible with orifice cover 【Our Strengths】 Tick Corporation is committed to providing products that meet our customers' needs. We will respond carefully to inquiries and questions regarding Rehiller air nozzles.

Achieve cost reduction and quality improvement in the painting process! Low noise, energy-saving, high-performance air nozzle.

【Features】 - Low noise design - Energy saving - Powerful impact force - Uniform air flow - Approved by OSHA, FDA, and (EC) No. 1935/2004 【Our Strengths】 Tick Corporation is committed to providing optimal products to improve production efficiency, enhance cost efficiency, improve quality, and contribute to environmental conservation. We offer extensive knowledge of Rehiller air nozzles and provide the best solutions tailored to our customers' needs.

Efficiently remove cutting oil from metal parts with complex shapes!

【Features】 - Rotating design accommodates complex-shaped parts - High-speed air jet for efficient water drainage/drying - Space-saving design - Reduction in energy costs - Made of stainless steel for excellent durability 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation, by offering products that meet customer needs.

Atomization of liquid without pressurization by piezo vibration. Enables uniform application while reducing power consumption and liquid waste.

【Sonia and Sonosis Ultrasonic Spray Nozzles】 Non-pressurized fine particle spraying using a spray nozzle and ultrasonic oscillator. Ultrasonic vibrations from piezo ceramics are transmitted to the spray nozzle, causing the liquid film to vibrate and spray fine particles. Liquid is supplied without pressure, allowing for the spraying of fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10ml/min to a maximum of 100ml/min. Since no pressure is applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid and negating the need for large painting booths, thus reducing capital investment and running costs. ≪Features≫ - Energy-saving as it supplies liquid with low power without pressurization. - Uniform atomization regardless of flow rate. - Particle size remains almost constant across the entire flow range. - High safety in operation due to low clogging tendency. - Good coating efficiency due to the slow self-velocity of particles. - Standard maximum flow rate is 100ml/min. - Operating frequency ranges from 20 to 130kHz (varies by model). - Outer particle size ranges from 11.8 to 42μm. (Sonia) *Various accessories are abundantly available. (Sonosis) *Standard air transport fixtures are included.

Cost reduction! A lineup of "low noise + energy-saving + high-performance" air nozzles approved by OSHA, FDA, and EC No. 1935/2004.

Many places still use open pipes for water drainage, blowing, transfer, and drying applications with compressors. By changing the blowing process to an air nozzle, noise generated can be significantly reduced, while also controlling air consumption and air pressure, allowing for the application of impact force. Leading with the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, performing blowing with powerful impact force from that orifice. Due to the strong injection force and the laminar flow of air, it reduces waste of air consumption and lowers noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, thanks to the manufacturer's unique design, air diffusion is prevented. The air nozzle FL-600E comes standard with an orifice cover (the world's first), allowing the injection port to be closed. This helps to minimize unnecessary air blowing in undesired areas. Please take a look. *Lechler GmbH is a German spray nozzle manufacturer.

A specialized blower for draining/drying that uses a small motor to spin at high speed and create a large airflow!

【Standard Product Specifications】 - Sonic 70 (Flow rate: 2~20 Nm3/min) - Sonic 85 (Flow rate: 2.4~24.1 Nm3/min) - Sonic 100 (Flow rate: 2.83~28.33 Nm3/min) - Sonic 150 (Flow rate: 4.25~35.4 Nm3/min) - Sonic 200 (Flow rate: 5.67~56.67 Nm3/min) - Sonic 300 (Flow rate: 8.5~70.8 Nm3/min) 【Special Blowers】 - VT blower with temperature variable device 【Accessories】 - HEPA filter - Cool Air (air cooling device) - Y Verter (air switching device) - Smart Tunnel (for beverages only) - Soundproof box - Piping and various other mounting accessories are available.

Improved air knife of the traditional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

【Standard Specifications】 Air Supply Port: 3" (2" and 1" are also available) Slot Lengths: 51mm, 153mm, 305mm, 458mm, 508mm, 610mm, 762mm, 915mm, 1067mm, 1220mm, 1524mm, 1829mm, 2134mm, 2439mm *Custom lengths can also be provided according to your company's specifications. Material: Made of aluminum (SUS material is also available.) Operating Temperature: -40℃ to 135℃

What is "one stone, three birds"? It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

It can reduce generated noise more effectively while providing impact force while suppressing air consumption and air pressure. Leading the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, allowing for a powerful blow with strong impact force from that opening. Due to the air flow being laminar along with the powerful injection force, it reduces waste of air consumption and noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, due to the manufacturer's unique design, there is no air diffusion. The air nozzle FL-600E comes standard with an orifice cover (the world's first), which allows for the closing of the injection port. This helps to minimize unnecessary air blowing to unwanted areas. Approval Standards: - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics - TSCA5 compliant

Uniform precision coating! Suppressing scattering and rebound.

【Features】 - Resistant to clogging and high safety during operation - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and low running costs - Available in two types: wide spray and narrow spray 【Our Strengths】 Tick Corporation is committed to providing products that meet customer needs, offering a wide range of products. We leverage our extensive knowledge and experience in ultrasonic spray nozzles to provide optimal solutions.

Apply softly to improve coating efficiency! Reduce waste of rust inhibitors!

**Features** - Resistant to clogging and high safety during operation - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray **Our Strengths** Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation, while responding to market needs.

Achieve uniform coating on electrodes! Reduce waste of coating liquid!

【Features】 - Resistant to clogging and high safety during operation - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and low running costs - Available in two types: wide spray and narrow spray 【Our Strengths】 Tick Corporation provides products that contribute to improving production efficiency and quality for our customers. We offer extensive knowledge about ultrasonic spray nozzles and provide optimal solutions tailored to our customers' needs.

Achieve uniform coating! Suppress the splatter and bounce-back of the coating liquid.

【Features】 - Resistant to clogging and high safety during operation - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and cost-effective running costs - Available in two types: wide spray and narrow spray 【Our Strengths】 Tick Corporation is committed to providing products that meet customer needs, offering a wide range of products. We leverage our extensive knowledge and experience in ultrasonic spray nozzles to support our customers in solving their challenges.

Efficiently remove cutting oil from complex-shaped metal parts!

【Features】 - The rotary air knife efficiently removes cutting oil even from complex-shaped parts. - The angle adjustment of the air knife allows for optimal blowing. - Energy-saving design reduces energy costs. - Made of stainless steel, usable in a temperature range of -40℃ to 120℃. - 3-inch air supply port. 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, increasing quality, and considering environmental conservation. We provide products that meet customer needs and contribute to streamlining processes.

Even complex-shaped substrates dry uniformly! Achieving energy savings and space efficiency.

【Features】 - The rotary air knife enables uniform drying even for complex-shaped substrates. - Energy-saving design reduces running costs. - Saves installation space. - Made of stainless steel, compatible with a wide temperature range from -40℃ to 120℃. - Patented technology. 【Our Strengths】 Tick Corporation provides products that contribute to improving production efficiency, reducing costs, enhancing quality, and preserving the environment for our customers. With years of experience and a rich product lineup, we offer the best solutions tailored to our customers' needs.

Low noise, energy-saving, and powerful drying!

【Features】 - Low noise design - Energy-saving performance - Powerful impact force - Uniform blow pattern - Adjustment of the nozzle with orifice cover 【Our Strengths】 Tick Corporation provides optimal products tailored to customer needs and supports improvements in production efficiency.

Air nozzle that enhances food cooling efficiency while reducing noise.

【Features】 - Low noise design - Energy-saving design - Powerful impact force - Two types of blow patterns (flat type, round type) - Adjustable nozzle with orifice cover 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation, by offering products that meet customer needs.

Soundproofing, energy-saving, high functionality! Strong support for deburring work.

**Features** * Low noise design * Energy-saving design * Powerful impact force * Two types of blow patterns: flat and round * Adjustable nozzle with orifice cover **Our Strengths** Tick Corporation provides products that contribute to improving production efficiency. We support product selection tailored to customer needs and offer post-implementation support.

Spray fine particles without pressure! Ideal for coating electronic components!

**Features** - Concentrated spraying of micron-level droplets onto small parts - High-precision spraying in a narrow range, ideal for thin film formation - Uniform spraying over a wide area, with an angled tip to disperse droplets - Capable of spraying into recessed areas such as inside bores and screw grooves - Usable in environments up to 600°C, equipped with a cooling port **Our Strengths** Tick Corporation is committed to providing optimal products to improve our customers' production efficiency, enhance quality, and contribute to environmental conservation. With extensive knowledge of ultrasonic spray nozzles and product selection tailored to customer needs, we support problem-solving.

Spraying fine particles without pressure! Improving the quality and efficiency of the film formation process!

【Features】 - Concentrated spraying of micron-level droplets on small parts (Precision Atomizer Nozzle) - High-precision spraying in a narrow area, ideal for thin film formation (Narrow Spray Nozzle) - Capable of uniform spraying over a wide area (Wide Spray Nozzle) - Supports spraying in recessed areas (Extended Wide Spray Nozzle) - Usable in environments up to 600℃ (High-Temperature Compatible Nozzle) 【Our Strengths】 Tick Corporation focuses on providing products that contribute to solving customer challenges. We handle a variety of energy-saving products, including ultrasonic spray nozzles, to support our customers' productivity improvement.

Optimize the cooling process in metal processing! Low noise, energy-saving, high-performance air nozzle.

【Features】 - Low noise design - Energy saving - Powerful impact force - Reduction of air consumption through laminar flow - Two types of blow patterns (flat type, round type) 【Our Strengths】 Tick Corporation focuses on providing products that contribute to solving customer challenges. We leverage our extensive knowledge and experience with Rehiller air nozzles to support optimal product selection and implementation.

Reduce the risk of foreign matter contamination in food manufacturing. Achieve energy savings and quiet operation.

【Features】 - Removal with powerful impact force through laminar flow - Noise level suppression - Energy-saving design - Material suitable for food, medical, and pharmaceutical use (POM) - Reduction of air waste with orifice cover 【Our Strengths】 Tick Corporation supports customers in solving their challenges through the provision of energy-saving products. Leveraging years of experience and expertise, we assist in the selection and implementation of optimal products.

Promotes blow drying after cleaning with laminar air. Achieves energy savings and quiet operation.

【Features】 - Uniform drying with laminar air - Noise level suppression - Energy-saving effect - Air adjustment with orifice cover - Materials suitable for food, medical, and pharmaceutical use 【Our Strengths】 Tick Corporation provides products that contribute to energy savings and productivity improvement. We offer optimal product selection tailored to customer needs and provide technical support.

Spraying fine particles without pressure! Improving the quality and cost of the film formation process!

【Features】 - Concentrated spraying of micron-level droplets on small parts (Precision Atomizer Nozzle) - High-precision spraying in a narrow area, ideal for thin film formation (Narrow Spray Nozzle) - Capable of uniform spraying over a wide area (Wide Spray Nozzle) - Usable in environments up to 600°C (High-Temperature Compatible Nozzle) - Ideal for application on inner walls of pipes, etc. (Radial Spray Nozzle) 【Our Strengths】 Tick Corporation provides optimal product selection tailored to customer needs and technical support. Leveraging years of experience and extensive product knowledge, we contribute to solving customer challenges.

Spraying fine particles without pressure! Contributing to the finish of painting and cost reduction!

【Features】 - Generates micron-level fine particles to achieve a uniform coating film - No pressure required, reducing paint splatter and bounce-back - Flow rate adjustment available, compatible with various paints - Lightweight and compact design, easy to mount on robots - Models available that can withstand high-temperature environments up to 600°C 【Our Strengths】 Tick Corporation is committed to providing optimal products to improve production efficiency, reduce costs, enhance quality, and contribute to environmental conservation for our customers. We can offer various products that optimize not only ultrasonic spray nozzles but also the entire painting process.

Maintain the quality of pharmaceuticals with non-pressurized spraying! Reduce waste with fine particle spraying!

**Features** - Sprays micron-level droplets - Flow rate ranges from a minimum of 10ml/min to a maximum of 100ml/min - Minimal splatter and liquid bounce-back - Reduction in capital investment and running costs - Compatible with high-temperature environments **Our Strengths** Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. Based on our extensive knowledge of ultrasonic spray nozzles and a proven track record in various industries, we offer optimal solutions that meet our customers' needs.

For removing water droplets after painting! Improve the drying process with an air knife.

【Features】 - Efficient removal of water droplets with high air volume - Reduced drying time with high-speed air - Compatible with various shapes of air knives - Energy-saving design to reduce running costs - Proven track record in water droplet removal beyond the food industry 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. We have widely collected product information from around the world and have been providing products that meet market needs.

Streamlining droplet removal and drying processes in food manufacturing!

**Features** - Efficient drying with high air volume and high-speed air - Operates at low pressure (15-20 kPa) - Extensive track record in the food industry - Various shapes of air knives and air nozzles available - Energy-saving design **Our Strengths** Tick Corporation aims to contribute to improving customer productivity, quality enhancement, and environmental conservation through the provision of energy-saving products. Leveraging years of experience and know-how, we provide optimal solutions for our customers' challenges.

Achieving quality improvement and cost reduction through tank cleaning!

【Features】 - Five levels of classification based on cleaning power - Long lifespan due to low-pressure specifications and cleaning liquid lubrication - Powerful cleaning with a free-spinning head - Cleaning of large tanks through internal drive control - Compatibility with various tank sizes 【Our Strengths】 - Simulation before actual machine testing within the PC - Proposal of optimal nozzles tailored to customer needs - Abundant track record and expertise

Streamlining the drying process of textile products! Low noise and energy-saving air nozzle.

【Features】 - Low noise design - Energy saving - Uniform air blow - Various blow patterns - Approved by OSHA, FDA, (EC) no. 1935/2004 【Our Strengths】 Tick Corporation focuses on providing optimal products tailored to our customers' needs. Leveraging our extensive knowledge and experience with Lechler air nozzles, we support our customers in improving production efficiency.

Cost reduction! Improve dust removal efficiency in the steel industry with low noise, energy-saving, high-performance air nozzles!

【Features】 - Low noise design: Reduces the noise level in the work environment - Energy-saving: Limits air consumption, contributing to cost reduction - High functionality: Achieves efficient dust removal with powerful impact force - Two types of blow patterns: Choose between flat and round types according to application - Orifice cover: Closes the nozzle to suppress unnecessary air blowing 【Our Strengths】 Tick Corporation selects the optimal air nozzle tailored to customer needs and supports from introduction to operation. Based on years of experience and achievements, we contribute to solving customer challenges.

Achieve cost reduction in paint manufacturing through water-saving tank cleaning!

【Features】 - Five-class settings based on cleaning power - Energy savings and extended lifespan through low-pressure specifications and cleaning liquid lubrication - Powerful cleaning capability with a free-spinning head - Optimal spray effect through internal drive control - Compatibility with various tank sizes and shapes 【Our Strengths】 - PC-based testing before physical machine tests using software for "visualization" - Proposals for optimal nozzles tailored to customer needs - Extensive track record and specialized knowledge

Achieve powerful blowing with low noise and energy saving!

【Features】 - Low noise - Energy-saving - Powerful impact force - Uniform drying - Two types of blow patterns (flat type, round type) 【Our Strengths】 Tick Corporation offers a variety of products to contribute to improving our customers' production efficiency. We can propose various solutions related to drying, not just air nozzles.

Efficient removal of water droplets and drying processes in food manufacturing!

【Features】 - Efficient drying with high air volume and high-speed air - Operates at low pressure, contributing to energy savings - Various shapes of air knives and air nozzles available - Extensive track record in the food industry - Ability to select the optimal model from a wide range of types 【Our Strengths】 Tick Corporation supports customers in improving productivity and reducing costs through the provision of energy-saving products. Leveraging years of experience and know-how, we offer solutions that best meet our customers' needs.

The collection of air knife case studies continues! Finally, we have reached the fifth installment!

**Main Specifications of the Blower** Model: Sonic 70 / 85 / 100 / 150 / 200 / 300 / 350 Airflow: 2~90 Nm³/min (varies by model, motor capacity, and pulley size) Power Supply: 3-phase 200V **Main Specifications of the Air Knife** Name: XE Air Knife Length: 50~3000 mm (please inquire about shape and length) Slot: (modifiable) *Various shapes of air knives and air nozzles are also available.* **Contents** ○ Sonic Corporation Case Study "Labeling Issues" ○ Sonic Corporation Case Study "Drying Automotive Cylinders" ○ Sonic Corporation Case Study "Removal of Residual Water After Cleaning Contact Lens Pallets" ○ Sonic Corporation Case Study "Steel Industry [Removal of Residuals on Plates]" ○ Sonic Corporation Case Study "Propane Gas Cylinders" ○ Photo Collection of Sonic Air Knife Systems ○ Blower & Air Knife "New Comprehensive Catalog" (excerpt) *Various other case studies are also included.* ● Please feel free to contact us regarding this matter. *Case study collections are also available.*

Freely and precisely fixed to the blow area.

Total length: 165mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length: 170mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length 240mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Overall length 285mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Overall length: 165mm Screw diameter: 1/4" PT (male)

Freely and easily fixed to the blow area in a pinpoint manner.

Overall length: 315mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length 280mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Overall length 200mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 315mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length 275mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Overall length: 275mm Screw diameter: 1/4" PT (male)

Freely and easily fixed to the blow area in a pinpoint manner.

Total length 240mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Fixed precisely at the blow area freely and effortlessly.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length 235mm Pipe side thread diameter 1/4" PT (male) Nozzle connection side thread diameter 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length: 195mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

World's One, Air Nozzle with Orifice Cover - An air nozzle that achieves strong impact force with laminar flow - One of the best-selling products.

Material: POM Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Best-selling Rehira air nozzle FL-600E's sister product, round type, made of zinc material.

Material: Zinc Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 90℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Steel/PVC Impact Force: 3.7N @ 0.2MPa Noise Level: 83.5 db (A) @ 0.2MPa Flow Rate: 27N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approved Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Company air nozzle FL-600E's sister product, super large round type.

Material: Brass/PVC Impact Force: 12.8N @ 0.2MPa Noise Level: 93 dB (A) @ 0.2MPa Flow Rate: 157N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle Multi-channel jet series flat type outlet two-phase type (FL-600FK sister product)

Material: Iron/PVC Impact Force: 4.3N @ 0.2MPa Noise Level: 86 dB (A) @ 0.2MPa Flow Rate: 31N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the best-selling Rehiller company's air nozzle FL-600E, offered in POM without pigments.

Material: Pure POM (without pigments) Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Brass/PVC Impact Force: 2.3N @ 0.2MPa Noise Level: 77.5 dB (A) @ 0.2MPa Flow Rate: 15N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *For mounting screws, dimensions, and spray width, please refer to the catalog. = Features = - Quiet operation (compared to semi-circular single-port nozzle (copper pipe and crushed version)): approximately 12 dB (A) reduction - Low air consumption (up to approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle, multi-channel jet series, flat type extra large.

Material: Iron/PVC Impact Force: 11.5N @ 0.2MPa Noise Level: 91.5 db (A) @ 0.2MPa Flow Rate: 100N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Material: Brass Weight: 52g Total Length: 50.5mm Width: 19mm Heat Resistance: 200℃ Screw Diameter: 1/4" PF (Male)

Sister product of the bestselling Rehiller air nozzle FL-600E, a type with half the spray width.

Material: POM Impact force: 0.8N @ 0.2MPa Noise level: 65 dB (A) @ 0.2MPa Flow rate: 8.5Nm3/h @ 0.2MPa Maximum operating pressure: 0.6MPa Heat resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in aluminum material.

Material: Aluminum Impact Force: 2.4N @ 0.2MPa Noise Level: 76 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please be cautious of humidity *Refer to the catalog for mounting screws, dimensions, and spray width = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the best-selling Rehiller air nozzle FL-600E, made of PP material.

Material: PP Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Sister product of the bestselling Rehiller air nozzle FL-600E, offered in stainless steel 316L.

Material: SUS 316L Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 13Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Material: SUS 316L Impact Force: 4.2N @ 0.2MPa Noise Level: 78 db (A) @ 0.2MPa Flow Rate: 32Nm3/h @ 0.2MPa Maximum Operating Pressure: 3MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed version)): approximately 12 db (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

The noise level has decreased by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

【Features】 ○ Noise level reduced by approximately 60% ○ Air consumption reduced by approximately 33% ○ Material made of SUS316L ○ Recommended maximum operating temperature is 180℃ ○ Suitable for a wide range of applications including food and medical use ○ Ideal for use in high-temperature environments ○ Angle-type structure allows for use in tight spaces ● For more details, please download the catalog or contact us.

Sister product of the bestselling Rehiller air nozzle FL-600E, round type.

Material: ABS Impact Force: 2.2N @ 0.2MPa Noise Level: 74 db (A) @ 0.2MPa Flow Rate: 16Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller air nozzle FL-600E's sister product, small round type.

Material: Brass/POM Impact Force: 1.1N @ 0.2MPa Noise Level: 77 dB (A) @ 0.2MPa Flow Rate: 9Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).

Material: SUS316L Impact Force: 0.7N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 4.2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Material: SUS316L Impact Force: 0.4N @ 0.2MPa Noise Level: 63 dB (A) @ 0.2MPa Flow Rate: 2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Seeing is believing! Improve drying and reduce running costs by using a high-speed air knife to blow off air discharged from a high-volume blower!

A job that required a pressure of 0.4 MPa has been achieved with just 29 kPa! When comparing the airflow of a compressor and a sonic blower, 62.5 horsepower is needed to obtain an airflow of 7 m³/min with a compressor. In contrast, the sonic blower can achieve this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers!

We will achieve a reduction in equipment investment and running costs.

-

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Liquid is supplied without pressure, allowing for the spraying of fine particles! Ultrasonic spray nozzle (atomizer) ♦Product Features♦ - Ultrasonic waves are transmitted to the atomizer (nozzle) through the vibration of piezo ceramics, causing the liquid film to vibrate and form fine particles for spraying. - Particle size remains almost constant across the entire flow range. - Resistant to clogging and offers high operational safety. - Minimal scattering and rebound, eliminating waste of the applied liquid and the need for large painting booths. - Low power consumption results in reduced energy costs. ●Product Composition: Atomizer + Ultrasonic Vibrator (Generator)

Flow spray of 2 mmlit/min or less is possible!

Frequency: 48kHz / 60kHz / 130kHz Flow rate: Up to 2mmlit/min Material: Stainless steel (aluminum version available on special order) Weight: 175g / 150g / 180g

The Sonia Corporation's ultrasonic particle size generator transforms liquids into fine particles!

The ultrasonic particle generator transforms low-viscosity liquids into fine particles. Our company's compact 2.4MHz NO model 241T uses a Teflon-coated nebulizer. This device is fully microcontroller-based, allowing users to program operating parameters while handling various applications for actual particle generation. The front panel is equipped with an LCD that enables users to vary the particle generation rate from 0% to 100% in 5% increments. To move particles that exit the vessel created for special processes, such as coating small parts, a device is incorporated that can adjust the flow rate between 0-2 cfm. This air source and all other connections feature easily detachable 304SS fittings and Teflon O-rings, allowing for easy adaptation to cleaning or connections for external gas supply or vacuum. The 304SS Tee (also available in Teflon-coated) is designed to trap particles, with a small amount of airflow/gas/vacuum used to move particles from the device.

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

【Standard Specifications】 ＝＝＝Wide Spray (Angled Type)＝＝＝ WS20K50 WS40K50 WS60K50 WS130K50 ＝＝＝Narrow Spray (Straight Type)＝＝＝ NS40K50 NS60K50 NS130K50 ＝＝＝Radical Spray (Horizontal Type)＝＝＝ CF40K50 In addition, we can also provide extended types, high-temperature compatible types, and air transport fixtures (accessories that spread particles).

The ≪Lechler≫ is a minimum tank cleaning nozzle with a length of approximately 30mm and an outer diameter of just φ9mm.

-

Designed to use fast-reacting liquids and capable of stirring in a short time!

The Sonia dual microfeed tube is designed to use fast-reacting liquids and can be stirred in a short time. The dual microfeed tube has two liquid supply ports, one at the top and the other on the side.

Air transport fixture for spraying in a square or rectangular shape.

This is an air transport device for spraying particles from an ultrasonic spray nozzle in a square or rectangular shape. Its main application is for coating. By adding a small amount of gas or air, it applies to square, rectangular, or flat substrates. By adjusting the distance from the workpiece and the pressure of the transport gas or air, various sizes and shapes of spray patterns from the Sonia ultrasonic spray nozzle can be achieved.

It precisely sprays fine particles!

The pinpoint air transport fixture can be connected to the Narrow Spray type 60K50T or 130K50T. There is an air supply port on the side of the pinpoint air transport fixture. By adding a small amount of gas or air, the particle size becomes 250 μm, and the particles are sprayed at a pinpoint focus. The spray width varies depending on the spraying position (the spray angle widens as the distance increases). The applications of the pinpoint air transport fixture are effective for applying small amounts of liquid and for applying expensive liquids in a very narrow range. It is available in aluminum and SUS 304 materials.

It is a subcutaneous solvent delivery device that can coat evenly and thinly.

The hypodermic needle spray attachment disperses the solvent at the nozzle tip and collects particles from the center of the orifice with a small flow of gas. It can be used for controlling liquid deposition for coating medical devices and small equipment. It is compatible with NS series nozzles of 40, 60, and 130 kHz.

Non-contact water removal and drying of wire cables using Sonic Corporation's blower and air knife.

【Application Success Case】 ○Problem → Due to a rapid increase in line speed, the conventional method became costly and inefficient. → If the cable is not completely dried, the inspection machine misidentifies it and judges it as a defective product. ○Solution → Due to the high-speed production of 3000 feet/min (900m/min), Sonic recommended the SP dryer. → This is a drying device housed in a box featuring air knife technology (XE 42” long) that achieves energy savings with a centrifugal blower (Sonic 150, 20 horsepower). ○Conclusion and Benefits → There was no downtime during installation. Installation, setup, trial operation, and verification took only one day. → The additional installation of a new spark tester was no longer an issue. → Not only did they improve their quality, but they were also able to increase production speed through enhanced drying efficiency. ● For more details, please contact us or refer to the catalog.

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

[Content] [Problem Solving] ○ Operated by Sonic100 (15 horsepower motor) ○ Long steel plates flow under the air knife at 1.22m/min to 3.05m/min ○ The width of these steel plates ranges from 48” to 96” (1.22m to 2.44m) ○ Typically, this line operates for several days in two shifts and then stops for several days ○ Basically, it runs continuously without stopping during the given shifts ○ To provide customers with unparalleled satisfaction and blow away a lot of residual water, using it before the final drying has achieved drying effects beyond expectations ● For more details, please contact us or download the catalog.

It has been proven to be the most cost-effective solution.

[Content] [Problem Solving] ○ Sonic Corporation proposed to install the rotating air knife diagonally from top to bottom for blowing from above, and the standard air knife horizontally. ○ It has been proven that the rotating air knife is suitable due to the low production speed and the complex shape of the engine block. ○ The rotating air knife can achieve a rotation speed of 200 rpm. ○ By rotating the air knife and then blowing, it can deliver multiple high impacts to the surface of the parts with a single air knife. ○ This technology has been proven to reduce horsepower and provide the most cost-effective solution while utilizing limited space. ● For more details, please contact us or download the catalog.

I have made it possible to repeatedly position the air knife.

[Content] [Problem Solving] - Proposed 12 units of Sonic 70 blowers with 7.5 horsepower motors, enclosures, Sonic HEPA filters, and two custom 13" Sonic XE air knives. - The performance of the air knives delivered at the beginning of this system perfectly matched the blow level requested by the customer. - Test results for contamination showed that Sonic's HEPA filters maintained the requested 0.3μ as required by the customer. - Custom Sonic air knives were manufactured to fit the enclosures of existing air knives, allowing for repeated positioning of the air knives. For more details, please contact us or download the catalog.

There was no need for additional construction, and it fit into the existing production line.

[Content] [Problem Solving] ○ Sonic Corporation decided to operate the Sonic150 with 25 horsepower and two air knives, and to circulate air to raise the temperature from the air knives. ○ The revolutionary design concept of Sonic's VT aims to utilize the pressure heat from the blower by partially circulating air. ○ The exit temperature from the air knife will be approximately 45°C to 50°C. ○ This method does not require an external thermal system. ○ The air knife is installed about 10mm away from the bottle, allowing the bottle to pass through at a wind speed of approximately 9,300m/min. ○ The high-speed wind and heated exit temperature melt the ice and turn the remaining moisture into mist. ○ As a result, the bottles can be completely dried. ○ The air knife is mounted on Sonic's fully detachable bracket, allowing for replacement without the use of tools. ○ It fits into the existing production line without the need for additional construction. ● For more details, please contact us or download the catalog.

Tilt the two air knives slightly and present a blowing method that focuses on the body and upper part.

[Technical Solutions from SONIC] ○ SONIC has tilted two air knives slightly and proposed a blowing method that concentrates on the body and upper part. ○ A third knife is used to remove water from the bottom. ○ The same design used for drying fenders supplied to a major American motorcycle manufacturer has been adopted. ○ The gap or slot of the air knife can be adjusted in length to allow for a wider gap. ○ While maintaining the standard gap, the knife gap can be separately adjusted at the top and bottom to hit the handle and the lower ring. ○ Not only does the wind hit the body of the tank effectively, but it also reduces the required power. ○ To further reduce costs, it was suggested to use ABS piping instead of plated steel pipes. ○ By installing this air knife, immediate results were achieved in removing residual water. ○ The wind speed at the outlet of the air knife is 340 MPH, so results are consistent regardless of day or night. ● For more details, please contact us or download the catalog.

Designed for fluids that have a strong impact on stainless steel, such as pharmaceutical-related applications.

The Sonia Corporation's PTFE fluoropolymer micro feed tube is designed specifically for fluids that have a strong impact on stainless steel, particularly for pharmaceutical-related applications. The liquid must be completely isolated for reasons of hygiene and chemical reactions. The PTFE tube is mounted behind the ultrasonic spray nozzle and inserted directly at the end. The liquid is fed through the micro feed tube and atomized into fine particles from the tip of the titanium nozzle. This product can be attached to orifices with diameters of 0.03” and 0.4”. *The part number varies depending on the orifice diameter.

Designed for ultra-low flow rates of 1 ml/min or less.

The Sonia Corporation's stainless steel micro feed tube is designed for extremely low flow rates of less than 1 ml/min. *Of course, it can also be used for flow rates above 1 ml/min. The liquid flows through without ever coming into contact with the tip, which forms a uniform particle size. The micro tube is attached behind the ultrasonic spray nozzle and is inserted directly at the end. The liquid is fed from the micro feed tube and is atomized into finer particles than the titanium tip. This product can be attached to orifices with diameters of 0.03” and 0.4”. *The part numbers vary depending on the orifice diameter.

A fixture for applying particles sprayed from an ultrasonic spray nozzle over a wide area.

The wide-angle air transport fixture is a device that uses gas or air to expand the spray angle. The wide-angle air transport fixture can be attached to the Narrow Spray types 60K50T and 130K50T. There is an air supply port on the side of the wide-angle air transport fixture. By injecting gas or air, the gas or air circulates inside, causing the particles sprayed from the ultrasonic spray nozzle to spread and be expelled. By adjusting the gas volume, air volume, pressure, and the tip of the ultrasonic spray nozzle, a spray angle of up to approximately 100° can be achieved.

A fixture for spreading wider than a wide-angle air transport fixture.

The Dovetail Spray Shaper is an air transport tool that is ideal for wide-angle spraying and flux coating. It can be used with all spray nozzles of NS and WS types. By changing the position of the Dovetail Spray Shaper, it is possible to switch from a fan-shaped spray pattern to an elliptical spray pattern.

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

A system that efficiently and economically performs water removal and drying after product cleaning, as well as blowing away chips and dust after product molding, by blowing out high-speed air with low noise and large air volume from an air knife. ◆Product Features◆ - Saves power consumption to a fraction of that used in similar operations with conventional compressed air (reducing CO2 emissions). - Compact and space-saving, making it ideal for installation alongside existing equipment with space limitations. ≪Sonic Rotary Air Knife (patented)≫ Even with uneven surfaces, high-speed air can reach all parts, effectively drying them. ≪Sonic Sanitary Air Knife≫ Designed for direct blowing on food, meets the 3A sanitary standards. Can be quickly disassembled for regular cleaning and sanitation. ≪Sonic XE Air Knife≫ Compatible with a wide variety of specifications in factories. Available in two types: aluminum with hard anodized coating and stainless steel.

"Sonic" water drainage drying is Sonic!! We are introducing case studies, conceptual installation diagrams, and photos.

【Contents】 ○ Success Stories → Labeling Issues → Steel Industry [Removal of Residuals on Plates] → Drying of Automotive Cylinders → Propane Gas Cylinders Not Fully Dried → Contamination of Particles Due to Static Electricity in Clean Rooms → Removal of Residual Water After Cleaning Contact Lens Pallets ○ Concept Installation Diagram ○ Photos ● For more details, please contact us or refer to the catalog.

"Sonic" drying is Sonic! We are introducing success stories and photos. [Simplified version]

【Publication Content】 ○Success Stories →Labeling Issues →Steel Industry [Removal of Residues on Plates] →Drying of Automotive Cylinders →Propane Gas Cylinders Not Fully Dried →Removal of Residual Water After Cleaning Contact Lens Pallets ○Photos ●For more details, please contact us or refer to the catalog.

Sonic Corporation's blower and air knife use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blower! Demo units available for loan!

【Lineup】 ■ Spiral Blower The blowers manufactured by Sonic utilize unique technology to create a large airflow while being energy-efficient compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. Additionally, the structure is designed for easy maintenance. ■ High-Speed XE Air Knife The Sonic High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A variety of options are available for the number, position, direction of the piping installation, and nozzle length. ■ SMART TUNNEL (Enclosure Box for Air Knife) This is an enclosure box for the air knife that is not available from other companies. The SMART TUNNEL allows for easy installation of Sonic's air knife and blower. *For more details, please refer to our YouTube channel.

Powerful air at over 25m/s for water removal and drying! Additionally, time-saving and energy-efficient! Comprehensive catalog available.

**Product Lineup** ■ Spiral Blower Sonic's blowers are powerful industrial fans, particularly suitable for draining and drying processes. They feature a spiral design that allows for high air volume supply with low energy consumption. Compared to compressors, they are energy-efficient and can carry out tasks effectively while maintaining a stable airflow. They are utilized across a wide range of industries, including food manufacturing and metal processing, and are easy to maintain. Furthermore, when combined with the high-speed XE air knife (available in other shapes), they achieve uniform airflow, contributing to improved work quality. ■ High-Speed XE Air Knife This nozzle has further improved upon the traditional Tear Drop shape to enhance work efficiency. It utilizes precise air flow to efficiently dry products and remove foreign substances. The high-speed XE air knife, in particular, achieves uniform airflow while minimizing pressure loss, providing a powerful blowing effect. It is suitable for various applications, including draining in food processing, drying before labeling automotive parts, and more. With an energy-efficient design, it operates more efficiently than compressors and is easy to maintain. It is a reliable product that contributes to improving quality on production lines and enhancing work efficiency.

By rotating the air knife, even complex shapes can be optimally drained/dried!

【Standard Specifications】 Air Supply Port: 3" Slot Lengths: 153mm, 305mm, 458mm, 508mm, 610mm Material: Stainless Steel Operating Temperature: -40℃ to 120℃

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet that includes case studies on solving post-cleaning issues across various industries!

【Publication Contents】 ○Sonic Case Study "Labeling Issues" ○Sonic Case Study "Drying of Automotive Cylinders" ○Sonic Case Study "Removal of Residual Water After Cleaning Contact Lens Pallets" ○Sonic Case Study "Removal of Residue in the Steel Industry [Removal of Residue on Plates]" ○Sonic Case Study "Propane Gas Cylinders" ○Sonic Air Knife System Photo Collection ○Sonic Case Study "Water Shedding Drying of Steel Plates" ○Sonic Case Study "Drying of Precision Parts Using Rotary Air Knife (Patent Obtained)" ○Sonic Case Study "Drying Example Using VT Blower (Hot Air Generating Blower (Patent Obtained))" ○Sonic Case Study "Removal of Water Droplets from Square Bottles Before Labeling" (Before and After) ○Sonic Case Study "Removal of Water Droplets Inside Steel Pipes" ○Sonic Case Study "Removal of Water Droplets from Engine Blocks" ○Sonic Case Study "Removal and Drying of Water Droplets from Wires, Cables, and Electric Wires" ○Sonic Case Study "Usage Example at a Certain Amusement Park" ○Blowers & Air Knives 'New Comprehensive Catalog' (Excerpt) Other case studies (omissions) are also being distributed via newsletter! ●For more details, please contact us or download the catalog.

Atomize the coating liquid with piezo vibration! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

【Examples of Use】 ■ Application of special cleaning solutions in research institutes, universities, and flat panels ■ Coating of automotive-related parts ■ Liquid coating on electric wires ■ Humidification of non-woven fabrics, etc. ★ Currently offering rental of demo units! 【Demo Unit Specifications】 "WS130K (Wide Spray Type)" Frequency: 130kHz Flow Rate: Up to 20mL/min Particle Size: Approximately 10μm "WS40K (Wide Spray Type)" Frequency: 40kHz Flow Rate: Up to 50mL/min Particle Size: Approximately 30μm *For more details, please download the catalog or contact us.

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, regulations are very strict in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of our spray nozzles for tank cleaning. We have prepared an LP that shows the cleaning effectiveness and efficiency by class. https://ticjapan.com/news/news-1282/ *Accessible from our company blog. For case studies, please refer to the URL below. https://tic-spray-solution.com/case-study/ *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Third installment! For those who have been unable to solve problems until now... Here are numerous case studies for problem-solving!

**Main Specifications of the Blower** Model: Sonic 70 / 85 / 100 / 150 / 200 / 300 / 350 Airflow: 2~90 Nm³/min (varies by model, motor capacity, and pulley size) Power Supply: 3-phase 200V **Main Specifications of the Air Knife** Name: XE Air Knife Length: 50~3000 mm (please inquire about shapes and lengths) Slot: (modifiable) *We also offer various shapes of air knives and air nozzles.* **Contents** ○ Sonic Company Case Study "Labeling Issues" ○ Sonic Company Case Study "Drying Automotive Cylinders" ○ Sonic Company Case Study "Removal of Residual Water After Cleaning Contact Lens Pallets" ○ Sonic Company Case Study "Steel Industry [Removal of Residues on Plates]" ○ Sonic Company Case Study "Propane Gas Cylinders" ○ Sonic Air Knife System Photo Collection ○ Blower & Air Knife "New Comprehensive Catalog" (excerpt) *Various other case studies are also included.* ● Please feel free to contact us regarding this matter. *We also have a collection of case studies.*

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Typically, when creating fine particles, pressurization is necessary. Alternatively, a method using two fluids, known as a two-fluid system, is commonly used to break down liquids. However, if the particles have too much velocity, the liquid may scatter, creating a poor environment. To improve this, ultrasonic spray nozzles are often used. Features: - Can supply liquid without pressurization, resulting in low power consumption (lower energy costs) - Uniform atomization regardless of flow rate from minimum flow - Particle size remains relatively consistent across the entire flow range - Resistant to clogging, enhancing workplace safety - Due to the slow self-velocity of the particles, coating efficiency is high - Operating frequency ranges from 45 to 100 kHz (varies by model) - Average particle diameter is approximately 20 μm to 40 μm (note: not a volume average)

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet that includes case studies on solving post-cleaning issues across various industries!

【Published Content】 ○Sonic Case Study "Solving Labeling Issues" ○Sonic Case Study "Draining Water After Cleaning Transport Boxes" ○Sonic Case Study "Drying Before Printing Cables" ○Sonic Case Study "Removing Water Droplets from Food Packaging" ○Sonic Case Study "Removing Water Droplets After Pasteurization" ○Sonic Case Study "Water Drainage Drying of Steel Plates" ○Sonic Case Study "Drying After Cleaning Golf Balls Used at Golf Ranges" ○Sonic Case Study "Removing Water Droplets Inside Steel Pipes" ○Sonic Case Study "Improvement of Coating Technology for Building Material Plywood" ○Sonic Case Study "Drying of Printed Circuit Boards" ○Sonic Case Study "Removing Water Droplets from Piggy Bottles" ○Sonic Case Study "Water Drainage of Vehicle Bodies" There are many other cases that cannot be listed! Additionally, we periodically distribute other case studies (omissions) via our newsletter! ● For more details, please contact us or download the catalog. ≪Demo Units Available for Loan≫ We also offer demo units for loan. If you are interested, please feel free to contact us. ≪Case Study Videos Available on YouTube≫ We regularly update test scenes and case studies.