[Analysis Case] Analysis of Corrosive Components in Indoor Atmosphere

It is possible to analyze ion components in the atmosphere using the impinger collection method.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Liquid Inside Smartphone Cases

Non-target analysis of liquid components using GC/MS is possible.

last updated Mar 13, 2025

[Analysis Case] Low-Temperature PL Spectrum of Si After Ion Implantation Annealing Treatment

It is possible to confirm the recovery of crystallinity due to irradiation defects and annealing.

last updated Mar 13, 2025

[Analysis Case] Analysis of Discoloration Components in Fibers

It is possible to evaluate the organic and inorganic components on the fiber surface.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Hydrogen Concentration in Hydrogen Water

It is possible to measure the hydrogen concentration in solutions such as hydrogen water.

last updated Mar 13, 2025

[Analysis Case] Structural Analysis of Polyimide Resin

Structural analysis of polyimide resin is possible using thermal decomposition GC/MS method.

last updated Mar 13, 2025

[Analysis Case] Analysis of Polyester by Reaction Thermal Decomposition GC/MS Method

Detailed structural analysis of polyester is possible.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Transdermal Absorption of Indomethacin in Rat Skin

Visualization of the distribution of active ingredients in biological tissues using TOF-SIMS.

last updated Oct 03, 2025

Analysis case: Evaluation of foreign substances present in resin.

Evaluation of foreign substances in resin is possible using TOF-SIMS through cross-section processing of the sample.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Ingredients in Tablet-Type Headache Medicine

Comparison of ingredients between new products and those after harsh testing; estimation of the structure of unknown components.

last updated Mar 13, 2025

[Analysis Case] Visualization of the Distribution of Components in Biomaterials

We will handle everything from the preparation of biological material sections to analysis.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Composition Distribution in Bone Cross-Sections

Visualization of the composition distribution of mouse tibial cross-sections using TOF-SIMS.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Composition Distribution of Tablet-Type Headache Medicine

Visualization of components in the cross-section of tablets after harsh testing and in new products.

last updated Mar 13, 2025

[Analysis Case] Evaluation of the Condition of Foreign Matter with Surface Oxidation Film

Evaluation of aluminum hydroxide Al(OH)3 and aluminum oxide Al2O3 is possible.

last updated Oct 03, 2025

High-precision quantitative evaluation of impurities in SiGe.

SIMS: Secondary Ion Mass Spectrometry

last updated Mar 12, 2025

[Analysis Case] Evaluation of Impurity Concentration in Gallium Oxide Ga2O3 Films Using SIMS

It is possible to quantitatively evaluate impurity elements.

last updated Mar 13, 2025

[Analysis Case] Ultra-high Sensitivity Measurement of Impurities in SiC Using SIMS

Evaluates bulk concentrations at the ppb to ppt level.

last updated Mar 13, 2025

[Analysis Case] High-Sensitivity Analysis of Nitrogen Compounds by GC

Analysis of nitrogen compounds using GC/MS/NPD (Nitrogen Phosphorus Detector).

last updated Oct 03, 2025

Concentration analysis of volatile components using a sample concentration needle.

GC/MS: Gas Chromatography-Mass Spectrometry

last updated Oct 03, 2025

Pre-treatment methods for trace element analysis on the wafer surface.

ICP-MS: Inductively Coupled Plasma Mass Spectrometry

last updated Sep 17, 2025

[Analysis Case] Analysis of Paper Coated with Dyes and Pigments

Visualization of molecular information derived from dyes and pigments is possible using TOF-SIMS.

last updated Mar 13, 2025

[Analysis Case] Degradation Analysis of Organic EL Devices Using MSDM

By visualizing the mass spectrum, more accurate analysis is possible.

last updated Oct 03, 2025

About MSDM

TOF-SIMS: Time-of-Flight Secondary Ion Mass Spectrometry

last updated Oct 03, 2025

[Analysis Case] Investigation of Degradation of Solid Polymer Fuel Cell Electrolyte Membrane

Evaluation of degradation leachate components by LC/MS and IC.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Organic EL Devices Using MSDM

Visualizing the mass spectrum enables more accurate analysis.

last updated Oct 03, 2025

[Analysis Case] Evaluation of High Electron Mobility Transistors

Evaluation of crystal coherence and compositional distribution is possible with Cs collector attached STEM.

last updated Mar 13, 2025

[Analysis Case] Polarity Evaluation of GaN by ABF-STEM Observation

Atomic-level observation is possible with the Cs collector-equipped STEM.

last updated Mar 13, 2025

[Analysis Case] Qualitative Analysis of Powder Contaminants

By combining techniques, it is possible to obtain multiple types of component information.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Additives in Polymer Materials Using Dissolution-Reprecipitation Method

Qualitative analysis of components using LC/MS and LC/MS/MS.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Additives in Polymer Materials

Qualitative analysis of components by LC/MS.

last updated Mar 13, 2025